欢迎访问ic37.com |
会员登录 免费注册
发布采购
所在地: 型号: 精确
  • 批量询价
  •  
  • 供应商
  • 型号
  • 数量
  • 厂商
  • 封装
  • 批号
  • 交易说明
  • 询价
  •  
  • 北京元坤伟业科技有限公司

         该会员已使用本站17年以上

  • TS78L05CX+RF
  • 数量-
  • 厂家-
  • 封装-
  • 批号-
  • -
  • QQ:857273081QQ:857273081 复制
    QQ:1594462451QQ:1594462451 复制
  • 010-62104931、62106431、62104891、62104791 QQ:857273081QQ:1594462451
更多

对不起,未查询到“TS78L05CX+RF”产品信息。
您可咨询上面配单直通车帮您一起找

建议您:

1、缩短查询关键词重新搜索;

2、你可以发布采购信息,让供应商主动联系您;

3、联系我站客服,帮助您查询产品信息,在线客服QQ:1372232724


返回首页快速发布采购

产品型号TS78L05CXRF的Datasheet PDF文件预览

TS78L00 Series  
3-Terminal 100mA Positive Voltage Regulator  
TO-92  
SOT-23  
SOP-8  
SOT-89  
Pin Definition:  
1. Output  
2. Ground  
3. Input  
Pin Definition:  
1. Output  
2. Input  
Pin Definition:  
Pin Definition:  
TS78L00ACY  
1. Output  
2. Ground  
3. Input  
1. Output  
2. Ground  
3. Ground  
4. N/C  
8. Input  
7. Ground  
6. Ground  
5. N/C  
3. Ground  
TS78L00CY  
1. Input  
2. Ground  
3. Output  
General Description  
The TS78L00 Series of positive voltage Regulators are inexpensive, easy-to-use devices suitable for a multitude of  
applications that require a regulated supply of up to 100mA. Like their higher power TS7800 and TS78M00 Series  
cousins, these regulators feature internal current limiting and thermal shutdown making them remarkably rugged. No  
external components are required with the TS78L00 devices in many applications.  
These devices offer a substantial performance advantage over the traditional zener diode-resistor combination, as  
output impedance and quiescent current are substantially reduced.  
Features  
Standard Application Circuit  
Output Voltage Range 3.3 to 24V  
Output current up to 100mA  
No external components required  
Internal thermal overload protection  
Internal short-circuit current limiting  
Output transistor safe-area compensation  
Output voltage offered in 4% tolerance  
Ordering Information  
A common ground is required between the input and the  
output voltages. The input voltage must remain typically  
2.0V above the output voltage even during the low point on  
the Input ripple voltage.  
Part No.  
Package  
Packing  
1Kpcs / Bulk  
TS78LxxCT B0  
TS78LxxCT A3  
TS78LxxACY RM  
TS78LxxCY RM  
TS78LxxCS RL  
TS78LxxCX RF  
TO-92  
TO-92  
2Kpcs/ Ammo  
1Kpcs / 7” Reel  
1Kpcs / 7” Reel  
2.5Kpcs / 13” Reel  
3Kpcs / 7” Reel  
XX = these two digits of the type number indicate voltage.  
* = Cin is required if regulator is located an appreciable  
SOT-89  
SOT-89  
SOP-8  
SOT-23  
distance from power supply filter.  
** = Co is not needed for stability; however, it does improve  
transient response.  
Note: Where xx denote voltage option  
Absolute Maximum Rating (Ta = 25oC unless otherwise noted)  
Parameter  
Symbol  
Limit  
30  
Unit  
TS78L03  
DC Input Voltage  
VIN  
V
TS78L05 ~ TS78L18  
TS78L24  
35  
40  
Power Dissipation  
PD  
TJ  
Internal Limited  
0 ~ +125  
-65~+150  
W
oC  
oC  
Operating Junction Temperature  
Storage Temperature Range  
TSTG  
1/12  
Version: B07  
TS78L00 Series  
3-Terminal 100mA Positive Voltage Regulator  
TS78L03 Electrical Characteristics  
(Vin=8.3V, Iout=40mA, 0oCTj125oC, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)  
Parameter  
Symbol  
Test Condition  
Tj=25oC  
Min  
Typ  
Max  
Unit  
3.173  
3.3  
3.432  
Output voltage  
Vout  
V
5.8VVin20V,  
3.142  
--  
3.3  
50  
3.465  
150  
5mAIout100mA  
5.8VVin20V  
Line Regulation  
REGline  
Tj=25oC  
Iout=40mA  
mV  
mA  
5mAIout100mA  
--  
--  
15  
5
60  
30  
6
Load Regulation  
REGload  
Tj=25oC  
5mAIout40mA  
Iout=0, Tj=25oC  
Quiescent Current  
Iq  
--  
3
5.8VVin20V  
--  
--  
1.5  
0.1  
--  
Quiescent Current Change  
ΔIq  
5mAIout40mA  
10Hzf100KHz, Tj=25oC  
f=120Hz, 5.8VVin20V  
Iout=100mA, Tj=25oC  
Tj=25oC  
--  
--  
Output Noise Voltage  
Ripple Rejection Ratio  
Voltage Drop  
Vn  
RR  
--  
40  
49  
2
µV  
dB  
V
41  
--  
--  
Vdrop  
Io peak  
--  
Peak Output Current  
Temperature Coefficient of  
Output Voltage  
--  
0.15  
--  
A
ΔVout/ ΔTj Iout=5mA, 0oCTj125oC  
--  
-0.2  
--  
mV/ oC  
TS78L05 Electrical Characteristics  
(Vin=10V, Iout=40mA, 0oCTj125oC, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)  
Parameter  
Symbol  
Test Condition  
Tj=25oC  
Min  
Typ  
Max  
Unit  
4.80  
5
5.20  
Output voltage  
Vout  
V
7.5VVin20V,  
4.75  
--  
5
5.25  
150  
5mAIout100mA  
7.5VVin20V  
Line Regulation  
REGline  
Tj=25oC  
50  
Iout=100mA  
mV  
mA  
5mAIout100mA  
--  
--  
20  
10  
3
60  
30  
6
Load Regulation  
REGload  
Tj=25oC  
5mAIout40mA  
Iout=0, Tj=25oC  
Quiescent Current  
Iq  
--  
7.5VVin20V  
--  
--  
1.5  
0.1  
--  
Quiescent Current Change  
ΔIq  
5mAIout40mA  
10Hzf100KHz, Tj=25oC  
f=120Hz, 7.5VVin20V  
Iout=100mA, Tj=25oC  
Tj=25oC  
--  
--  
Output Noise Voltage  
Ripple Rejection Ratio  
Voltage Drop  
Vn  
RR  
--  
40  
49  
1.7  
0.15  
µV  
dB  
V
41  
--  
--  
Vdrop  
Io peak  
--  
Peak Output Current  
Temperature Coefficient of  
Output Voltage  
--  
--  
A
ΔVout/ ΔTj Iout=5mA, 0oCTj125oC  
--  
-0.65  
--  
mV/oC  
Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as  
possible, and thermal effects must be taken into account separately.  
This specification applies only for DC power dissipation permitted by absolute maximum ratings.  
2/12  
Version: B07  
TS78L00 Series  
3-Terminal 100mA Positive Voltage Regulator  
TS78L06 Electrical Characteristics  
Vin=12V, Iout=40mA, 0oCTj125oC, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)  
Parameter  
Symbol  
Test Condition  
Tj=25oC  
Min  
Typ  
Max  
Unit  
5.76  
6
6.24  
Output voltage  
Vout  
V
8.5VVin21V,  
5.70  
--  
6
6.30  
150  
5mAIout100mA  
8.5VVin21V  
Line Regulation  
REGline  
Tj=25oC  
50  
Iout=40mA  
mV  
5mAIout100mA  
--  
--  
12  
4
60  
30  
6
Load Regulation  
REGload  
Tj=25oC  
5mAIout40mA  
Quiescent Current  
Iq  
Iout=0, Tj=25oC  
--  
3
mA  
8.5VVin21V  
--  
--  
1.5  
0.1  
--  
Quiescent Current Change  
ΔIq  
5mAIout40mA  
10Hzf100KHz, Tj=25oC  
f=120Hz, 8.5VVin21V  
Iout=100mA, Tj=25oC  
Tj=25oC  
--  
--  
Output Noise Voltage  
Ripple Rejection Ratio  
Voltage Drop  
Vn  
RR  
--  
40  
49  
1.7  
0.15  
µV  
dB  
V
41  
--  
--  
Vdrop  
Io peak  
--  
Peak Output Current  
Temperature Coefficient of  
Output Voltage  
--  
--  
A
ΔVout/ ΔTj Iout= 5mA, 0oCTj125oC  
--  
-0.75  
--  
mV/oC  
TS78L08 Electrical Characteristics  
Vin=14V, Iout=40mA, 0oCTj125oC, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)  
Parameter  
Symbol  
Test Condition  
Tj=25oC  
Min  
Typ  
Max  
Unit  
7.69  
8
8.32  
Output voltage  
Vout  
V
10.5VVin23V,  
7.61  
--  
8
8.40  
160  
5mAIout100mA  
10.5VVin23V  
Line Regulation  
REGline  
Tj=25oC  
80  
Iout=40mA  
mV  
5mAIout100mA  
--  
--  
25  
10  
3
80  
40  
6
Load Regulation  
REGload  
Tj=25oC  
5mAIout40mA  
Quiescent Current  
Iq  
Iout=0, Tj=25oC  
--  
mA  
10.5VVin23V  
--  
--  
1.5  
0.1  
--  
Quiescent Current Change  
ΔIq  
5mAIout40mA  
10Hzf100KHz, Tj=25oC  
f=120Hz, 10.5VVin23V  
Iout=100mA, Tj=25oC  
Tj=25oC  
--  
--  
Output Noise Voltage  
Ripple Rejection Ratio  
Voltage Drop  
Vn  
RR  
--  
60  
57  
1.7  
0.15  
µV  
dB  
V
37  
--  
--  
Vdrop  
Io peak  
--  
Peak Output Current  
Temperature Coefficient of  
Output Voltage  
--  
--  
A
ΔVout/ ΔTj Iout=5mA, 0oCTj125oC  
--  
-0.8  
--  
mV/oC  
Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as  
possible, and thermal effects must be taken into account separately.  
This specification applies only for DC power dissipation permitted by absolute maximum ratings.  
3/12  
Version: B07  
TS78L00 Series  
3-Terminal 100mA Positive Voltage Regulator  
TS78L09 Electrical Characteristics  
Vin=15V, Iout=40mA, 0oCTj125oC, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)  
Parameter  
Symbol  
Test Condition  
Tj=25oC  
Min  
Typ  
Max  
Unit  
8.65  
9
9.36  
Output voltage  
Vout  
V
11.5VVin23V,  
8.57  
--  
9
9.45  
180  
5mAIout100mA  
11.5VVin23V  
Line Regulation  
REGline  
Tj=25oC  
90  
Iout=40mA  
mV  
5mAIout100mA  
5mAIout40mA  
--  
--  
30  
15  
3
90  
45  
6
Load Regulation  
REGload  
Tj=25oC  
Quiescent Current  
Iq  
Iout=0, Tj=25oC  
--  
mA  
11.5VVin23V  
--  
--  
1.5  
0.1  
--  
Quiescent Current Change  
ΔIq  
5mAIout40mA  
10Hzf100KHz, Tj=25oC  
f=120Hz, 11.5VVin23V  
Iout=100mA, Tj=25oC  
Tj=25oC  
--  
--  
Output Noise Voltage  
Ripple Rejection Ratio  
Voltage Drop  
Vn  
RR  
--  
60  
57  
1.7  
0.15  
µV  
dB  
V
37  
--  
--  
Vdrop  
Io peak  
--  
Peak Output Current  
Temperature Coefficient of  
Output Voltage  
--  
--  
A
ΔVout/ ΔTj Iout=5mA, 0oCTj125oC  
--  
-0.9  
--  
mV/oC  
TS78L12 Electrical Characteristics  
Vin=19V, Iout=40mA, 0oC Tj125oC, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)  
Parameter  
Symbol  
Test Condition  
Tj=25oC  
Min  
Typ  
Max  
Unit  
11.53  
12  
12.48  
Output voltage  
Vout  
V
14.5VVin27V,  
11.42  
--  
12  
12.60  
240  
5mAIout100mA  
14.5VVin27V  
Line Regulation  
REGline  
Tj=25oC  
120  
Iout=40mA  
mV  
5mAIout100mA  
--  
--  
40  
20  
3
120  
60  
6.5  
1.5  
0.1  
--  
Load Regulation  
REGload  
Tj=25oC  
5mAIout40mA  
Quiescent Current  
Iq  
Iout=0, Tj=25oC  
--  
mA  
14.5VVin27V  
--  
--  
Quiescent Current Change  
ΔIq  
5mAIout40mA  
10Hzf100KHz, Tj=25oC  
f=120Hz, 14.5VVin27V  
Iout=100mA, Tj=25oC  
Tj=25oC  
--  
--  
Output Noise Voltage  
Ripple Rejection Ratio  
Voltage Drop  
Vn  
RR  
--  
80  
42  
1.7  
0.15  
µV  
dB  
V
37  
--  
--  
Vdrop  
Io peak  
--  
Peak Output Current  
Temperature Coefficient of  
Output Voltage  
--  
--  
A
ΔVout/ ΔTj Iout=5mA, 0oCTj125oC  
--  
-1.0  
--  
mV/oC  
Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as  
possible, and thermal effects must be taken into account separately.  
This specification applies only for DC power dissipation permitted by absolute maximum ratings.  
4/12  
Version: B07  
TS78L00 Series  
3-Terminal 100mA Positive Voltage Regulator  
TS78L15 Electrical Characteristics  
Vin=23V, Iout=40mA, 0oCTj125oC, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)  
Parameter  
Symbol  
Test Condition  
Tj=25oC  
Min  
Typ  
Max  
Unit  
14.42  
15  
15.60  
Output voltage  
Vout  
V
17.5VVin30V,  
14.28  
--  
15  
15.75  
300  
5mAIout100mA  
17.5VVin30V  
Line Regulation  
REGline  
Tj=25oC  
150  
Iout=40mA  
mV  
5mAIout100mA  
--  
--  
50  
25  
3
150  
75  
6.6  
1.5  
0.1  
--  
Load Regulation  
REGload  
Tj=25oC  
5mAIout40mA  
Quiescent Current  
Iq  
Iout=0, Tj=25oC  
--  
mA  
17.5VVin30V  
--  
--  
Quiescent Current Change  
ΔIq  
5mAIout40mA  
10Hzf100KHz, Tj=25oC  
f=120Hz, 17.5VVin30V  
Iout=100mA, Tj=25oC  
Tj=25oC  
--  
--  
Output Noise Voltage  
Ripple Rejection Ratio  
Voltage Drop  
Vn  
RR  
--  
90  
39  
1.7  
0.15  
µV  
dB  
V
34  
--  
--  
Vdrop  
Io peak  
--  
Peak Output Current  
Temperature Coefficient of  
Output Voltage  
--  
--  
A
ΔVout/ ΔTj Iout=5mA, 0oCTj125oC  
--  
-1.3  
--  
mV/ oC  
TS78L18 Electrical Characteristics  
Vin=27V, Iout=40mA, 0oCTj125oC, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)  
Parameter  
Symbol  
Test Condition  
Tj=25oC  
Min  
Typ  
Max  
Unit  
17.30  
18  
18.72  
Output voltage  
Vout  
V
21VVin33V,  
17.14  
--  
18  
18.90  
360  
5mAIout100mA  
21Vin33V  
Line Regulation  
REGline  
Tj=25oC  
180  
Iout=40mA  
mV  
5mAIout100mA  
5mAIout40mA  
--  
--  
60  
30  
3
180  
90  
6.5  
1.5  
0.1  
--  
Load Regulation  
REGload  
Tj=25oC  
Quiescent Current  
Iq  
Iout=0, Tj=25oC  
--  
mA  
21VVin33V  
--  
--  
Quiescent Current Change  
ΔIq  
5mAIout40mA  
10Hzf100KHz, Tj=25oC  
f=120Hz, 21VVin33V  
Iout=100mA, Tj=25oC  
Tj=25oC  
--  
--  
Output Noise Voltage  
Ripple Rejection Ratio  
Voltage Drop  
Vn  
RR  
--  
150  
48  
1.7  
0.15  
µV  
dB  
V
33  
--  
--  
Vdrop  
Io peak  
--  
Peak Output Current  
Temperature Coefficient of  
Output Voltage  
--  
--  
A
ΔVout/ ΔTj Iout=5mA, 0oCTj125oC  
--  
-1.5  
--  
mV/oC  
Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as  
possible, and thermal effects must be taken into account separately.  
This specification applies only for DC power dissipation permitted by absolute maximum ratings.  
5/12  
Version: B07  
TS78L00 Series  
3-Terminal 100mA Positive Voltage Regulator  
TS78L24 Electrical Characteristics  
Vin=33V, Iout=40mA, 0oCTj125oC, Cin=0.33uF, Cout=0.1uF; unless otherwise specified.)  
Parameter  
Symbol  
Test Condition  
Tj=25oC  
Min  
Typ  
Max  
Unit  
23.07  
24  
24.96  
Output voltage  
Vout  
V
27VVin38V,  
22.85  
--  
24  
25.20  
400  
5mAIout100mA  
27Vin38V  
Line Regulation  
REGline  
Tj=25oC  
200  
Iout=40mA  
mV  
5mAIout100mA  
--  
--  
80  
40  
4
240  
120  
7
Load Regulation  
REGload  
Tj=25oC  
5mAIout40mA  
Quiescent Current  
Iq  
Iout=0, Tj=25oC  
--  
mA  
27VVin38V  
--  
--  
1.5  
0.1  
--  
Quiescent Current Change  
ΔIq  
5mAIout40mA  
10Hzf100KHz, Tj=25oC  
f=120Hz, 27VVin38V  
Iout=100mA, Tj=25oC  
Tj=25oC  
--  
--  
Output Noise Voltage  
Ripple Rejection Ratio  
Voltage Drop  
Vn  
RR  
--  
200  
45  
1.7  
0.15  
µV  
dB  
V
31  
--  
--  
Vdrop  
Io peak  
--  
Peak Output Current  
Temperature Coefficient of  
Output Voltage  
--  
--  
A
ΔVout/ ΔTj Iout=5mA, 0oCTj125oC  
--  
-2.0  
--  
mV/oC  
Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as  
possible, and thermal effects must be taken into account separately.  
This specification applies only for DC power dissipation permitted by absolute maximum ratings.  
6/12  
Version: B07  
TS78L00 Series  
3-Terminal 100mA Positive Voltage Regulator  
Application Information  
Design Considerations  
The TS78L00 Series of fixed voltage regulators are designed with Thermal Overload Protection that shuts down the  
circuit when subjected to an excessive power overload condition. Internal Short Circuit protection Limits the maximum  
current the circuit will pass.  
In many low current applications, compensation capacitors are not required. However, it is recommended that the  
regulator input be bypassed with a capacitor if the regulator is connected to the power supply filter with long wire  
lengths, or if the output load capacitance is large. The input bypass capacitor should be selected to provide good high-  
frequency characteristics to insure stable operation under all load conditions. A 0.33uF or larger tantalum, mylar, or  
other capacitor having low internal impedance at high frequencies should be chosen. The bypass capacitor should be  
mounted with the shortest possible leads directly across the regulators input terminals. Good construction techniques  
should be used to minimize ground loops and lead resistance drops since the regulator has no external sense lead.  
Bypassing the output is also recommended.  
FIGURE 7 – Current Regulator  
FIGURE 2 – ±15V Tracking Voltage Regulator  
The TS78L00 regulators can also be used as a current  
source when connected as above. In order to minimize  
dissipation the TS78L05 is chosen in this application.  
Resistor R determines the current as follows:  
FIGURE 8 – ±15V Tracking Voltage Regulator  
IIB=3.8mA over lined and load changes  
For example, a 100mA current source would require R to  
be a 50Ω. 1/2W resistor and the output voltage compliance  
would be the input voltage less 7V.  
7/12  
Version: B07  
TS78L00 Series  
3-Terminal 100mA Positive Voltage Regulator  
TO-92 Mechanical Drawing  
TO-92 DIMENSION  
MILLIMETERS  
INCHES  
DIM  
MIN  
4.30  
4.30  
MAX  
4.70  
4.70  
MIN  
MAX  
0.185  
0.185  
A
B
C
D
E
F
0.169  
0.169  
14.30(typ)  
0.563(typ)  
0.43  
2.19  
3.30  
2.42  
0.37  
0.49  
2.81  
3.70  
2.66  
0.43  
0.017  
0.086  
0.130  
0.095  
0.015  
0.019  
0.111  
0.146  
0.105  
0.017  
G
H
Marking Diagram  
XX = Output Voltage  
(03=3.3V, 05=5V, 06=6V, 08=8V, 09=9V, 12=12V, 15=15V, 18=18V, 24=24V)  
Y
= Year Code  
M
= Month Code  
(A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep,  
J=Oct, K=Nov, L=Dec)  
L
= Lot Code  
8/12  
Version: B07  
TS78L00 Series  
3-Terminal 100mA Positive Voltage Regulator  
SOT-89 Mechanical Drawing  
SOT-89 DIMENSION  
MILLIMETERS  
INCHES  
MIN  
DIM  
MIN  
4.40  
1.50  
2.30  
0.40  
1.50  
3.00  
0.89  
4.05  
1.4  
MAX  
4.60  
1.7  
MAX  
0.181  
0.070  
0.102  
0.020  
0.059  
0.118  
0.047  
0.167  
0.068  
0.017  
A
B
C
D
E
F
G
H
I
0.173  
0.059  
0.090  
0.016  
0.059  
0.118  
0.035  
0.159  
0.055  
0.014  
2.60  
0.52  
1.50  
3.00  
1.20  
4.25  
1.6  
J
0.35  
0.44  
Marking Diagram  
XX = Output Voltage  
(03=3.3V, 05=5V, 06=6V, 08=8V, 09=9V, 12=12V, 15=15V, 18=18V, 24=24V)  
Y
= Year Code  
M
= Month Code  
(A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep,  
J=Oct, K=Nov, L=Dec)  
L
= Lot Code  
XX = Output Voltage  
(03=3.3V, 05=5V, 06=6V, 08=8V, 09=9V, 12=12V, 15=15V, 18=18V, 24=24V)  
= Year Code  
Y
M
= Month Code  
(A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep,  
J=Oct, K=Nov, L=Dec)  
= Lot Code  
L
A
= TS78LxxACY  
9/12  
Version: B07  
TS78L00 Series  
3-Terminal 100mA Positive Voltage Regulator  
SOP-8 Mechanical Drawing  
SOP-8 DIMENSION  
MILLIMETERS  
INCHES  
MIN  
DIM  
MIN  
4.80  
3.80  
1.35  
0.35  
0.40  
MAX  
5.00  
4.00  
1.75  
0.49  
1.25  
MAX.  
0.196  
0.157  
0.068  
0.019  
0.049  
A
B
C
D
F
0.189  
0.150  
0.054  
0.014  
0.016  
G
K
M
P
R
1.27BSC  
0.05BSC  
0.10  
0º  
0.25  
7º  
0.004  
0º  
0.009  
7º  
5.80  
0.25  
6.20  
0.50  
0.229  
0.010  
0.244  
0.019  
Marking Diagram  
XX = Output Voltage  
(03=3.3V, 05=5V, 06=6V, 08=8V, 09=9V, 12=12V, 15=15V, 18=18V, 24=24V)  
Y
= Year Code  
M
= Month Code  
(A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep,  
J=Oct, K=Nov, L=Dec)  
L
= Lot Code  
10/12  
Version: B07  
TS78L00 Series  
3-Terminal 100mA Positive Voltage Regulator  
SOT-23 Mechanical Drawing  
SOT-23 DIMENSION  
MILLIMETERS  
MIN MAX  
0.95 BSC  
1.9 BSC  
INCHES  
MIN MAX.  
DIM  
A
A1  
B
C
D
E
F
0.037 BSC  
0.074 BSC  
2.60  
1.40  
2.80  
1.00  
0.00  
0.35  
0.10  
0.30  
5º  
3.00  
1.70  
3.10  
1.30  
0.10  
0.50  
0.20  
0.60  
10º  
0.102  
0.118  
0.067  
0.122  
0.051  
0.004  
0.020  
0.008  
0.024  
10º  
0.055  
0.110  
0.039  
0.000  
0.014  
0.004  
0.012  
5º  
G
H
I
J
Marking Diagram  
L3 = Device Voltage Code  
(L3=3.3V, L5=5V, L6=6V, L8=8V, L9=9V, L1=10V, L2=12V, A=15V, D=18V, J=24V)  
= Year Code  
Y
M = Month Code  
(A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep,  
J=Oct, K=Nov, L=Dec)  
L
= Lot Code  
11/12  
Version: B07  
TS78L00 Series  
3-Terminal 100mA Positive Voltage Regulator  
Notice  
Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf,  
assumes no responsibility or liability for any errors or inaccuracies.  
Information contained herein is intended to provide a product description only. No license, express or implied, to any  
intellectual property rights is granted by this document. Except as provided in TSC’s terms and conditions of sale for  
such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale  
and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability,  
or infringement of any patent, copyright, or other intellectual property right.  
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers  
using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for  
any damages resulting from such improper use or sale.  
12/12  
Version: B07  
配单直通车
TS78L05CY产品参数
型号:TS78L05CY
是否Rohs认证: 符合
生命周期:Active
IHS 制造商:TAIWAN SEMICONDUCTOR CO LTD
Reach Compliance Code:compliant
风险等级:5.57
Is Samacsys:N
可调性:FIXED
标称回动电压 1:1.7 V
最大绝对输入电压:35 V
最大电网调整率:0.15%
最大负载调整率:0.06%
湿度敏感等级:1
输出次数:1
端子数量:3
工作温度TJ-Max:150 °C
工作温度TJ-Min:
最大输出电流 1:0.04 A
标称输出电压 1:5 V
封装主体材料:PLASTIC/EPOXY
封装等效代码:TO-243
认证状态:Not Qualified
子类别:Other Regulators
表面贴装:YES
技术:BIPOLAR
最大电压容差:5%
Base Number Matches:1
  •  
  • 供货商
  • 型号 *
  • 数量*
  • 厂商
  • 封装
  • 批号
  • 交易说明
  • 询价
批量询价选中的记录已选中0条,每次最多15条。
 复制成功!