欢迎访问ic37.com |
会员登录 免费注册
发布采购
所在地: 型号: 精确
  • 批量询价
  •  
  • 供应商
  • 型号
  • 数量
  • 厂商
  • 封装
  • 批号
  • 交易说明
  • 询价
  •  
  • 北京元坤伟业科技有限公司

         该会员已使用本站17年以上

  • UPC29M05AHF-AZ
  • 数量-
  • 厂家-
  • 封装-
  • 批号-
  • -
  • QQ:857273081QQ:857273081 复制
    QQ:1594462451QQ:1594462451 复制
  • 010-62104931、62106431、62104891、62104791 QQ:857273081QQ:1594462451
更多
  • UPC29M05AHF-AZ图
  • 万三科技(深圳)有限公司

     该会员已使用本站2年以上
  • UPC29M05AHF-AZ
  • 数量660000 
  • 厂家Renesas Electronics America Inc. 
  • 封装原厂原装 
  • 批号23+ 
  • 支持实单/只做原装
  • QQ:3008961398QQ:3008961398 复制
  • 0755-21006672 QQ:3008961398
  • UPC29M05AHF-AZ图
  • 万三科技(深圳)有限公司

     该会员已使用本站2年以上
  • UPC29M05AHF-AZ
  • 数量6500000 
  • 厂家RENESAS 
  • 封装原厂原装 
  • 批号22+ 
  • 万三科技 秉承原装 实单可议
  • QQ:3008962483QQ:3008962483 复制
  • 0755-23763516 QQ:3008962483

产品型号UPC29M05AHF-AZ的Datasheet PDF文件预览

To our customers,  
Old Company Name in Catalogs and Other Documents  
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology  
Corporation, and Renesas Electronics Corporation took over all the business of both  
companies. Therefore, although the old company name remains in this document, it is a valid  
Renesas Electronics document. We appreciate your understanding.  
Renesas Electronics website: http://www.renesas.com  
April 1010  
Rectronics Corporation  
Issued by: Renesas Electronics Corporation (m)  
Send any inquiries to http://www.renesas.c
Notice  
1.  
2.  
All information included in this document is current as of the date this document is issued. Such information, however, is  
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please  
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to  
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.  
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights  
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.  
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights  
of Renesas Electronics or others.  
3.  
4.  
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.  
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of  
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,  
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by  
you or third parties arising from the use of these circuits, software, or information.  
5.  
When exporting the products or technology described in this document, you should comply with the applicable export control  
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas  
Electronics products or the technology described in this document for any purpose relating to military applications or use by  
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and  
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited  
under any applicable domestic or foreign laws or regulations.  
6.  
7.  
Renesas Electronics has used reasonable care in preparing the information includs document, but Renesas Electronics  
does not warrant that such information is error free. Renesas Electronics assuy whatsoever for any damages  
incurred by you resulting from errors in or omissions from the information
Renesas Electronics products are classified according to the following tard”, “High Quality”, and  
“Specific”. The recommended applications for each Renesas Electroduct’s quality grade, as  
indicated below. You must check the quality grade of each Renesing it in a particular  
application. You may not use any Renesas Electronics product as “Specific” without the prior  
written consent of Renesas Electronics. Further, you may nroduct for any application for  
which it is not intended without the prior written consent s Electronics shall not be in any way  
liable for any damages or losses incurred by you or thif any Renesas Electronics product for an  
application categorized as “Specific” or for which te you have failed to obtain the prior written  
consent of Renesas Electronics. The quality gradroduct is “Standard” unless otherwise  
expressly specified in a Renesas Electronics d
“Standard”:  
Computers; office equipent; test and measurement equipment; audio and visual  
equipment; home elels; personal electronic equipment; and industrial robots.  
“High Quality”: Transportation eqhips, etc.); traffic control systems; anti-disaster systems; anti-  
crime systems; equipment not specifically designed for life support.  
“Specific”:  
Aircraft; aee repeaters; nuclear reactor control systems; medical equipment or  
systems fe support devices or systems), surgical implantations, or healthcare  
interany other applications or purposes that pose a direct threat to human life.  
8.  
9.  
You should use the Rescribed in this document within the range specified by Renesas Electronics,  
especially with respect toperating supply voltage range, movement power voltage range, heat radiation  
characteristics, installation characteristics. Renesas Electronics shall have no liability for malfunctions or  
damages arising out of the use Electronics products beyond such specified ranges.  
Although Renesas Electronics endors to improve the quality and reliability of its products, semiconductor products have  
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,  
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to  
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a  
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire  
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because  
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system  
manufactured by you.  
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental  
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable  
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS  
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with  
applicable laws and regulations.  
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas  
Electronics.  
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this  
document or Renesas Electronics products, or if you have any other inquiries.  
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-  
owned subsidiaries.  
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.  
DATA SHEET  
BIPOLAR ANALOG INTEGRATED CIRCUIT  
μPC29M33A, 29M05A  
THREE-TERMINAL LOW DROPOUT VOLTAGE REGULATOR  
DESCRIPTION  
The μPC29M33A, 29M05A of low dropout voltage three terminal positive regulators is constructed with PNP output  
transistor. The μPC29M33A, 29M05A feature the ability to source 0.5 A of output current with a low dropout voltage of  
typically 0.5 V.  
The power dissipation of the μPC29M33A, 29M05A can be drastically reduced mpared with the conventional three  
terminal positive voltage regulators that is constructed with NPN output transishis series corresponds to the low  
voltage output (3.3 V) which is not in the conventional low dropout regulatorries).  
FEATURES  
Output current in excess of 0.5 A  
Low dropout voltage  
VDIF = 0.5 V TYP. (IO = 0.5 A)  
On-chip over-current and thermal protection circuit  
On-chip output transistor safe operating area pr
PIN CONFIGURATIONS (Marking S
μ PC29M33AHF,  
,  
μPC29M33AT,  
μ PC29M05AHF: Isolated TO-2
AHB: SC-64 (MP-3)  
μPC29M05AT: SC-63 (MP-3Z)  
4
4
1
2
3
1
2
3
1: INPUT  
1: INPUT  
1: INPUT  
2: GND  
3: OUTPUT  
2: GNDNote1  
3: OUTPUT  
4: GND (Fin)  
2: GNDNote2  
3: OUTPUT  
4: GND (Fin)  
1
2 3  
Notes 1. No.2 pin and No.4 fin are common GND.  
2. No.2 pin is cut. No.2 pin and No.4 fin are common GND.  
The information in this document is subject to change without notice. Before using this document, please  
confirm that this is the latest version.  
Not all products and/or types are available in every country. Please check with an NEC Electronics  
sales representative for availability and additional information.  
Document No. G15368EJ4V0DS00 (4th edition)  
Date Published August 2007 NS  
Printed in Japan  
2001, 2007  
The mark <R> shows major revised points.  
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.  
μPC29M33A, 29M05A  
BLOCK DIAGRAM  
INPUT  
Safe operating  
area protection  
Start-up  
circuit  
Reference  
voltage  
Saturation  
protection  
Error  
Amp.  
Drive  
circuit  
OUTPUT  
Thermal  
shut down  
Over-current  
protection  
GND  
2
Data Sheet G15368EJ4V0DS  
μPC29M33A, 29M05A  
<R>  
ORDERING INFORMATION  
Part Number  
Package  
Output Voltage  
Marking  
μ PC29M33AHF  
μ PC29M33AHB  
μ PC29M33AT  
μ PC29M05AHF  
μ PC29M05AHB  
μ PC29M05AT  
Isolated TO-220 (MP-45G)  
SC-64 (MP-3)  
3.3 V  
3.3 V  
3.3 V  
5.0 V  
5.0 V  
5.0 V  
29M33A  
29M33A  
29M33A  
29M05A  
29M05A  
29M05A  
SC-63 (MP-3Z)  
Isolated TO-220 (MP-45G)  
SC-64 (MP-3)  
SC-63 (MP-3Z)  
Remark Tape-packaged products have the symbol -E1, or -E2 suffixed to the part number. Pb-free products have the  
symbol -AZ, or -AY suffixed to the part number. Refer to the following table for details.  
Part Number Note1  
Package  
Package Type  
μ PC29MxxAHF  
Isolated TO-220 (MP-45G)  
Isolated TO-220 (MP-45G)  
SC-64 (MP-3)  
μ PC29MxxAHF-AZ Note2  
μ PC29MxxAHB  
op  
μ PC29MxxAHB-AZ Note2  
μ PC29MxxAHB-AY Note3  
μ PC29MxxAT-E1  
SC-64 (MP-3)  
nvelop  
SC-64 (MP-3)  
d in envelop  
SC-63 (MP-3Z)  
6 mm wide embossed taping  
Pin 1 on draw-out side  
2000 pcs/reel  
Note2  
μ PC29MxxAT-E1-AZ  
μ PC29MxxAT-E1-AY  
μ PC29MxxAT-E2  
S
S(MP-3Z)  
SC-63 (MP-3Z)  
SC-63 (MP-3Z)  
16 mm wide embossed taping  
Pin 1 on draw-out side  
2000 pcs/reel  
Note3  
16 mm wide embossed taping  
Pin 1 on draw-out side  
2000 pcs/reel  
16 mm wide embossed taping  
Pin 1 at take-up side  
2000 pcs/reel  
Note2  
Note3  
μ PC29MxxAT-E2-AZ  
μ PC29MxxAT-E2-AY  
16 mm wide embossed taping  
Pin 1 at take-up side  
2000 pcs/reel  
16 mm wide embossed taping  
Pin 1 at take-up side  
2000 pcs/reel  
Notes 1. xx stands for symbols that indicate the output voltage.  
2. Pb-free (This product does not contain Pb in the external electrode.)  
3. Pb-free (This product does not contain Pb in the external electrode, Sn100% plating.)  
3
Data Sheet G15368EJ4V0DS  
μPC29M33A, 29M05A  
ABSOLUTE MAXIMUM RATINGS (TA = 25°C)  
Parameter  
Rating  
Unit  
Symbol  
μ PC2933AHF, 2905AHF  
μ PC2933AHB, 2905AHB  
μ PC2933AT, 2905AT  
Input Voltage  
VIN  
20  
V
W
Internal Power Dissipation (TC = 25°C) Note  
Operating Ambient Temperature  
Operating Junction Temperature  
Storage Temperature  
PT  
15  
10  
TA  
30 to +85  
30 to +150  
55 to +150  
°C  
TJ  
°C  
Tstg  
Rth(J-C)  
Rth(J-A)  
°C  
Thermal Resistance (junction to case)  
Thermal Resistance (junction to ambient)  
7
12.5  
125  
°C/W  
°C/W  
65  
Note Internally limited. When the operating junction temperature rises above internal circuit shuts down the  
output voltage.  
Caution Product quality may suffer if the absolute maximn momentarily for any  
parameter. That is, the absolute maximum ratingthe product is on the verge  
of suffering physical damage, and therefore under conditions that ensure  
that the absolute maximum ratings are not
TYPICAL CONNECTION  
29M05A  
INPUT  
OUTPUT  
+
D
2
COUT  
CIN : 0.1 μ F or higher. Be sure tCIN to prevent parasitic oscillation. Set this value according to the length of the  
line between the regulator and e INPUT pin. Use of a film capacitor or other capacitor with first-rate voltage and  
temperature characteristics is recommended. If using a laminated ceramic capacitor, it is necessary to ensure that  
CIN is 0.1 μF or higher for the voltage and temperature range to be used.  
COUT: 47 μF or higher. Be sure to connect COUT to prevent oscillation and improve excessive load regulation. Place CIN  
and COUT as close as possible to the IC pins (within 1 to 2 cm). Also, use an electrolytic capacitor with low  
impedance characteristics if considering use at sub-zero temperatures.  
D1 : If the OUTPUT pin has a higher voltage than the INPUT pin, connect a diode.  
D2 : If the OUTPUT pin has a lower voltage than the GND pin, connect a Schottky barrier diode.  
Caution Make sure that no voltage is applied to the OUTPUT pin from external.  
4
Data Sheet G15368EJ4V0DS  
μPC29M33A, 29M05A  
RECOMMENDED OPERATING CONDITIONS  
Parameter  
Input Voltage  
Symbol  
Type Number  
MIN.  
4.3  
6
TYP.  
MAX.  
16  
Unit  
V
VIN  
μ PC29M33A  
μ PC29M05A  
16  
Output Current  
IO  
All  
All  
0
0.5  
A
TA  
30  
+85  
°C  
Operating Ambient Temperature  
Operating Junction Temperature  
TJ  
All  
30  
+125  
°C  
ELECTRICAL CHARACTERISTICS  
μPC29M33A (TJ = 25°C, VIN = 5 V, IO = 350 mA, CIN = 0.22 μF, COUT = 47 μF, unless otherwise specified)  
Parameter  
Output Voltage  
Symbol  
Conditions  
TYP.  
.3  
MAX.  
3.42  
Unit  
V
VO  
0°C TJ 125°C, 4.3 V VIN 1
0 A IO 350 mA  
3.46  
0°C TJ 125°C, 0 A
4.3 V VIN 16 V  
Line Regulation  
Load Regulation  
Quiescent Current  
REGIN  
REGL  
IBIAS  
8
10  
1.8  
15  
9
33  
33  
3.0  
20  
20  
50  
15  
mV  
mV  
0 A IO 0.5 A  
IO = 0 A  
mA  
mA  
IO = 0.
Startup Quiescent Current  
IBIAS (s)  
V
VIN 16 V  
, f = 120 Hz  
5°C, IO = 0.5 A  
V  
Quiescent Current Change  
Output Noise Voltage  
Ripple Rejection  
ΔIBIAS  
V
2.9  
56  
mA  
μ Vr.m.s.  
dB  
48  
64  
Dropout Voltage  
0.5  
1.1  
0.6  
1.2  
1.0  
1.0  
1.5  
V
Short Circuit Current  
0.7  
A
A
= 16 V  
Peak Output Current  
IOpea
VIN = 4.5 V  
0.7  
0.6  
1.5  
1.5  
VIN = 16 V  
Temperature Coefficient of  
Output Voltage  
ΔVO/ΔT  
0°C TJ 125°C, IO = 5 mA  
0.4  
mV/°C  
5
Data Sheet G15368EJ4V0DS  
μPC29M33A, 29M05A  
μPC29M05A (TJ = 25°C, VIN = 8 V, IO = 350 mA, CIN = 0.22 μF, COUT = 47 μF, unless otherwise specified)  
Parameter  
Output Voltage  
Symbol  
Conditions  
MIN.  
4.83  
TYP.  
5.0  
MAX.  
5.18  
Unit  
V
VO  
0°C TJ 125°C, 6 V VIN 16 V,  
0 A IO 350 mA  
4.75  
5.25  
0°C TJ 125°C, 0 A IO 0.5 A  
6 V VIN 16 V  
Line Regulation  
Load Regulation  
Quiescent Current  
REGIN  
REGL  
IBIAS  
26  
17  
1.9  
15  
10  
50  
50  
4.0  
20  
20  
50  
15  
mV  
mV  
0 A IO 0.5 A  
IO = 0 A  
mA  
mA  
IO = 0.5 A  
Startup Quiescent Current  
IBIAS (s)  
VIN = 4.5 V, IO = 0 A  
VIN = 4.5 V, IO = 0.5 A  
0°C TJ 125°C, 6 V VIN 16 V  
10 Hz f 100 kHz  
6 V VIN 16 V, f = 120 Hz  
0°C TJ 125°C, IO = 0.5 A  
VIN = 6.5 V  
Quiescent Current Change  
Output Noise Voltage  
Ripple Rejection  
ΔIBIAS  
Vn  
2.4  
87  
mA  
μ Vr.m.s.  
dB  
R•R  
VDIF  
IOshort  
Dropout Voltage  
0.6  
1.2  
1.1  
1.0  
1.5  
V
Short Circuit Current  
A
A
VIN = 16 V  
Peak Output Current  
IOpeak  
VIN = 6.5 V  
6  
1.5  
1.5  
VIN = 16 V  
Temperature Coefficient of  
Output Voltage  
ΔVO/ΔT  
0°C TJ
0.5  
mV/°C  
6
Data Sheet G15368EJ4V0DS  
μPC29M33A, 29M05A  
TYPICAL CHARACTERISTICS  
ΔVO vs TJ  
150  
100  
50  
20  
15  
10  
5
Solid line:  
μ
PC29M33AHF, μPC29M05AHF  
Broken line:  
PC29M33AHB , PC29M05AHB  
PC29M33AT , PC29M05AT  
μ
μ
μ
μ
With infinite heatsink  
μ
PC29M05A  
0
μ
PC29M33A  
–50  
–100  
–150  
–200  
1.92  
1.0  
0
I
O
= 5 mA  
0
25  
50  
75  
100  
125  
150  
0
50  
100 150  
–50  
T
A
- Operating Ambient Temperature - ˚C  
T
J - Operon Temperature - ˚C  
5A)  
μ
VO vs. VIN ( PC29M33A)  
8
7
4.0  
3.5  
3.0  
2.5  
2.0  
1.5  
1.0  
T
J
= 25˚C  
TJ = 25˚C  
I
O
= 5 mA  
I = 0.35 A  
O
IO = 0.5 A  
0
0.5  
0
0
1
2
3
4
5
6
7
8
0
1
2
3
4
VIN - Input Voltage - V  
V
IN - Inp
I
BIAS (IBIAS(
IBIAS (IBIAS(s)) vs. VIN  
μ
( PC29M05A)  
50  
40  
30  
20  
50  
40  
30  
20  
T
= 25˚C  
I
O
= 0.5 A  
IO  
= 0.5 A  
I
O
= 0.35 A  
10  
0
10  
0
I = 0.35 A  
O
I = 0 A  
O
O
= 0 A  
0
2
4
6
8
10 12 14 16 18 20  
0
2
4
6
8
10 12 14 16 18 20  
V
IN - Input Voltage - V  
VIN - Input Voltage - V  
7
Data Sheet G15368EJ4V0DS  
μPC29M33A, 29M05A  
V
DIF vs. T  
J
I
Opeak vs. VDIF ( PC29M33A)  
μ
1.0  
0.8  
0.6  
0.4  
0.2  
0
1.5  
1.0  
TJ = 0˚C  
PC29M05A  
μ
T
J
= 25˚C  
PC29M33A  
μ
TJ = 125˚C  
0.5  
0.0  
I
O
= 0.5 A  
125  
-25  
0
25  
50  
75  
100  
150  
0
5
10  
15  
20  
VDIF - Dropout Voltage - V  
TJ - Operating Junction Temperature - ˚C  
s f  
I
μ
Opeak vs. VDIF ( PC2905A)  
80  
70  
60  
1.5  
1.0  
T = 0˚C  
J
T = 25˚C  
J
0.5  
0.0  
T = 125˚C  
J
TJ  
= 25˚C, I  
4.3 V VIN 16 V  
6 VVIN 16 V PC29M05A  
O = 0.5 A  
μ
PC29M33A  
μ
100  
1 k  
10 k  
100 k  
0
5
10  
f - Frequency - Hz  
V
DIF - Dropout Voltag
.
V
DIF vs. I  
O
80  
70  
60  
50  
1.0  
TJ = 25˚C  
0.8  
0.6  
0.4  
μ
PC29M05A  
μ
PC29M33A  
T
J
= 25˚C, f = 120 Hz  
PC29M05A  
μ
4.3 V VIN 16 V PC29M33A  
6 VVIN 16 V PC29M05A  
μ
40  
30  
0.2  
0
μ
0
0.1  
0.2  
0.3  
0.4  
0.5  
0
0.1  
0.2  
0.3  
0.4  
0.5  
IO - Output Current - A  
IO - Output Current - A  
8
Data Sheet G15368EJ4V0DS  
μPC29M33A, 29M05A  
VO  
vs. I ( PC29M05A)  
μ
O
V
O
vs. I ( PC29M33A)  
O
μ
6
5
4
3
2
1
6
5
4
3
2
1
T = 25˚C  
J
T = 25˚C  
J
VIN =  
8 V  
V
= 5 V  
VIN = 16 V  
V
IN = 16 V  
VIN = 6 V  
VIN  
= 4.3 V  
0
0.2  
0.4  
0.6  
0.8  
1.0  
1.2  
0
0.2  
0.4  
0.6  
0.8  
1.0  
1.2  
I
O
- Output Current - A  
I
O
- Output Current - A  
9
Data Sheet G15368EJ4V0DS  
μPC29M33A, 29M05A  
PACKAGE DRAWINGS  
μPC29M33AHF, μPC29M05AHF  
3PIN PLASTIC SIP (MP-45G)  
A
B
N
P
E
I
L
M
D
1
2
3
V
U
M
G
NOTE  
Each n 0.25 mm of  
its tmaterial condition.  
ITEM MILLIMETERS  
A
B
C
D
E
F
G
H
I
10.0 0.2  
7.0 0.2  
1.50 0.2  
17.0 0.3  
φ
3.3 0.2  
0.75 0.10  
0.25  
2.54 (T.P.)  
5.0 0.3  
J
2.46 0.2  
5.0 0.2  
K
L
8.5 0.2  
M
N
P
U
V
Y
Z
8.5 0.2  
4.5 0.2  
2.8 0.2  
2.4 0.5  
0.65 0.10  
8.9 0.7  
1.30 0.2  
P3HF-254B-4  
10  
Data Sheet G15368EJ4V0DS  
μPC29M33A, 29M05A  
μPC29M33AHB, μPC29M05AHB  
SC-64 (MP-3) (Unit: mm)  
6.5 0.2  
5.0 0.2  
2.3 0.2  
0.5 0.1  
4
1
2
3
1.1 0.1  
+0.2  
0.1  
0.5  
2.3 2.3  
μPC29M33AT, μ PC29M05AT  
SC-63 (MP-3Z) (Unit: mm)  
<R>  
2  
2.3 0.2  
0.5 0.1  
Note  
Note  
4
3
1
2
0.5 0.1  
2.3 0.3  
0.5 0.1  
2.3 0.3  
0.15 0.15  
Note The depth of notch at the top of the fin is from 0 to 0.2 mm.  
11  
Data Sheet G15368EJ4V0DS  
μPC29M33A, 29M05A  
<R>  
RECOMMENDED SOLDERING CONDITIONS  
The μPC29M33A, 29M05A should be soldered and mounted under the following recommended conditions.  
For soldering methods and conditions other than those recommended below, contact an NEC Electronics sales  
representative.  
For technical information, see the following website.  
Semiconductor Device Mount Manual (http://www.necel.com/pkg/en/mount/index.html)  
Surface Mount Device  
μ PC29MxxAT Series: SC-63 (MP-3Z)  
Process  
Conditions  
Symbol  
Infrared Ray Reflow  
Peak temperature: 235°C or below (Package surface temperae),  
Reflow time: 30 seconds or less (at 210°C or higher),  
Maximum number of reflow processes: 3 times or less
IR35-00-3  
Vapor Phase Soldering  
Partial Heating Method  
Peak temperature: 215°C or below (Package sur
Reflow time: 40 seconds or less (at 200°C or
Maximum number of reflow processes: 3
VP15-00-3  
P350  
Pin temperature: 350°C or below,  
Heat time: 3 seconds or less (P
μ PC29MxxAT-AZ Series Note1, μ PC29MxxAT-AY S
Process  
Symbol  
Infrared Ray Reflow  
Peak temperaturce temperature),  
Reflow time: igher),  
Maximum mes or less.  
IR60-00-3  
Partial Heating Method  
Pin t
P350  
each side of the device).  
Notes 1. Pb-free (This n the external electrode.)  
2. Pb-free (This prodPb in the external electrode, Sn100% plating.)  
Caution Apply only one kind oering condition to a device, except for "partial heating method", or the  
device will be damaged by heat stress.  
Remark Flux: Rosin-based flux with low chlorine content (chlorine 0.2 Wt% or below) is recommended.  
12  
Data Sheet G15368EJ4V0DS  
μPC29M33A, 29M05A  
Through-hole devices  
μ PC29MxxAHF Series, μ PC29MxxAHF-AZ Series Note1: Isolated TO-220 (MP-45G)  
μ PC29MxxAHB Series, μ PC29MxxAHB-AZ Series Note1, μ PC29MxxAHB-AY Series Note2: SC-64 (MP-3)  
Process  
Conditions  
Symbol  
Wave soldering  
Solder temperature: 260°C or below, Flow time: 10 seconds or less.  
WS60-00-1  
(only to leads)  
Partial heating method  
Pin temperature: 350°C or below, Heat time: 3 seconds or less (Per each pin).  
P350  
Notes 1. Pb-free (This product does not contain Pb in the external electrode.)  
2. Pb-free (This product does not contain Pb in the external electrode, Sn100% plating.)  
Caution For through-hole device, the wave soldering process must be applied only to leads, and make sure that  
the package body does not get jet soldered.  
NOTES ON USE  
When the μPC29M33A, 29M05A are used with an input vovalue indicated in the  
recommended operating conditions, a high quiescent current flosaturation of the transistor of  
the output stage. (Refer to the “IBIAS (IBIAS(S)) vs. VIN curves TICS”).  
These products have saturation protector, but a currey flow through the device. Thus the  
power supply on the input side must have sufficient nt current to pass when the device starts  
up.  
REFERENCE DOCUMENTS  
USER’S MANUAL USAGE OF TORS  
REVIEW OF QUALITY AND
INFORMATION VOLTAG
SEMICONDUCTOR DEV
Document No.G12702E  
Document No.C12769E  
Document No.G11872E  
http://www.necel.com/pkg/en/mount/index.html  
13  
Data Sheet G15368EJ4V0DS  
μPC29M33A, 29M05A  
The information in this document is current as of August, 2007. The information is subject to  
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data  
sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not  
all products and/or types are available in every country. Please check with an NEC Electronics sales  
representative for availability and additional information.  
No part of this document may be copied or reproduced in any form or by any means without the prior  
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may  
appear in this document.  
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual  
property rights of third parties by or arising from the use of NEC Electronics products listed in this document  
or any other liability arising from the use of such products. No licensexpress, implied or otherwise, is  
granted under any patents, copyrights or other intellectual property rights Electronics or others.  
Descriptions of circuits, software and other related information in tare provided for illustrative  
purposes in semiconductor product operation and applicatioincorporation of these  
circuits, software and information in the design of a customdone under the full  
responsibility of the customer. NEC Electronics assumey losses incurred by  
customers or third parties arising from the use of these cation.  
While NEC Electronics endeavors to enhance the quNEC Electronics products,  
customers agree and acknowledge that the possibiot be eliminated entirely. To  
minimize risks of damage to property or injurons arising from defects in NEC  
Electronics products, customers must incoeasures in their design, such as  
redundancy, fire-containment and anti-failu
NEC Electronics products are classifiequality grades: "Standard", "Special" and  
"Specific".  
The "Specific" quality grade appcs products developed based on a customer-  
designated "quality assurance cation. The recommended applications of an NEC  
Electronics product depend oted below. Customers must check the quality grade of  
each NEC Electronics proicular application.  
"Standard": Computerications equipment, test and measurement equipment, audio  
and vionic appliances, machine tools, personal electronic equipment  
and i
"Special": Transputomobiles, trains, ships, etc.), traffic control systems, anti-disaster  
systems, ams, safety equipment and medical equipment (not specifically designed  
for life supp
"Specific": Aircraft, aerospequipment, submersible repeaters, nuclear reactor control systems, life  
support systems and medical equipment for life support, etc.  
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC  
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications  
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to  
determine NEC Electronics' willingness to support a given application.  
(Note)  
(1)  
"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its  
majority-owned subsidiaries.  
(2)  
"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as  
defined above).  
M8E 02. 11-1  
配单直通车
UPC29M05AHF-AZ产品参数
型号:UPC29M05AHF-AZ
是否Rohs认证: 符合
生命周期:Transferred
零件包装代码:SFM
包装说明:,
针数:3
Reach Compliance Code:compliant
ECCN代码:EAR99
HTS代码:8542.39.00.01
风险等级:5.37
最大回动电压 1:1 V
最大输入电压:16 V
最小输入电压:6 V
JESD-30 代码:R-PSFM-T3
JESD-609代码:e6
功能数量:1
端子数量:3
工作温度TJ-Max:125 °C
工作温度TJ-Min:-30 °C
最大输出电流 1:0.5 A
最大输出电压 1:5.25 V
最小输出电压 1:4.75 V
标称输出电压 1:5 V
封装主体材料:PLASTIC/EPOXY
封装形状:RECTANGULAR
封装形式:FLANGE MOUNT
峰值回流温度(摄氏度):235
认证状态:Not Qualified
调节器类型:FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR
表面贴装:NO
技术:BIPOLAR
端子面层:TIN BISMUTH
端子形式:THROUGH-HOLE
端子位置:SINGLE
处于峰值回流温度下的最长时间:30
Base Number Matches:1
  •  
  • 供货商
  • 型号 *
  • 数量*
  • 厂商
  • 封装
  • 批号
  • 交易说明
  • 询价
批量询价选中的记录已选中0条,每次最多15条。
 复制成功!