SPDT RF SWITCH
ZX80-DR230+
Parameter
Condition
Min.
Typ.
Max.
Units
(note 3)
Operating Frequency
DC
3000
MHz
1 GHz
2 GHz
3 GHz
0.7
0.9
1.2
1.3
1.6
1.8
Insertion Loss
dB
dB
dB
dB
dB
1 GHz
2 GHz
3 GHz
55
46
35
64
50
44
Isolation between Common port and RF1/RF2 ports
Isolation between RF1 and RF2 ports
Return Loss @ Common port
1 GHz
2 GHz
3 GHz
60
54
37
63
60
48
1 GHz
2 GHz
3 GHz
20
17
15
1 GHz
2 GHz
3 GHz
17
15
15
Return Loss @ RF1/RF2 ports
(note 1)
Input IP2
5 MHz - 1000 MHz
10 MHz - 3000MHz
+80
+55
dBm
dBm
(note 1)
Input IP3
(note 1,2)
Input 1dB Compression
1000 MHz
+28
+31
dBm
Notes:
1. Device linearity degrades below 1 MHz.
2. Note absolute maximum ratings for input power.
3. Lowest Freq. determined by value of coupling capacitors at RF ports.
DC Electrical Specifications
Parameter
Min.
2.7
—
Typ.
-
Max.
Units
Vdd, Supply Voltage
5.0
1.0
0.4
V
mA
V
Supply Current (Vdd = 5V)
Control Voltage Low
0.5
—
0
Control Voltage High
2.4
—
—
V
dd
V
Control Current (per pin)
0.5
1.0
mA
Switching Specifications
Parameter
Min.
—
Typ.
2.0
—
Max.
—
Units
Switching Time, 50% CTRL to 90/10% RF
µSec
(note 4)
mVp-p
Video Feedthrough, 5 MHz - 1000 MHz
—
15
Note 4: Measured with a 1 nSec risetime,0/3V pulse and 500 MHz bandwidth.
Absolute Maximum Ratings
Parameter
Ratings
Operating Temperature
Storage Temperature
-40°C to 85°C
-55°C to 100°C
-0.3V Min. 6V Max.
-0.3V Min. 6V Max.
1000V
Vdd, Supply Voltage
Control Voltage
ESD, HBM
(note 5)
RF input power:
When the common port is connected to the RF port (RF1 or RF2)
When the RF port (RF1 or RF2) is not connected to the common port
When the common port is not connected to either RF1 or RF2
+33dBm
+24dBm
+24dBm
Note 5: See Truth Table on page 3.
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
®
Mini-Circuits
Page 2 of 7
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com