A43L8316
Absolute Maximum Ratings*
*Comments
Voltage on any pin relative to VSS (Vin, Vout ) . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -1.0V to +4.6V
Voltage on VDD supply relative to VSS (VDD, VDDQ )
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-1.0V to +4.6V
Storage Temperature (TSTG) . . . . . . . . . . -55°C to +150°C
Soldering Temperature X Time (TSLODER) . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C X 10sec
Power Dissipation (PD) . . . . . . . . . . . . . . . . . . . . . . . . .1W
Short Circuit Current (Ios) . . . . . . . . . . . . . . . . . . . . 50mA
Permanent device damage may occur if “Absolute
Maximum Ratings” are exceeded.
Functional operation should be restricted to recommended
operating condition.
Exposure to higher than recommended voltage for
extended periods of time could affect device reliability.
DC Electrical Characteristics
Recommend operating conditions (Voltage referenced to VSS = 0V)
Parameter
Supply Voltage
Symbol
Min
3.0
2.0
-0.3
2.4
-
Typ
Max
Unit
V
Note
VDD,VDDQ
3.3
3.6
Input High Voltage
VIH
VIL
VOH
VOL
IIL
3.0
VDD+0.3
V
Input Low Voltage
0
-
0.8
-
V
Note 1
IOH = -2mA
IOL = 2mA
Note 2
Output High Voltage
Output Low Voltage
Input Leakage Current
Output Leakage Current
Output Loading Condition
V
-
0.4
5
V
-5
-
mA
mA
IOL
-5
-
5
Note 3
See Figure 1
Note: 1. VIL (min) = -1.5V AC (pulse width £ 5ns).
2. Any input 0V £ VIN £ VDD + 0.3V, all other pins are not under test = 0V
3. Dout is disabled, 0V £ Vout £ VDD
Decoupling Capacitance Guide Line
Recommended decoupling capacitance added to power line at board.
Parameter
Symbol
CDC1
Value
Unit
mF
Decoupling Capacitance between VDD and VSS
Decoupling Capacitance between VDDQ and VSSQ
0.1 + 0.01
0.1 + 0.01
CDC2
mF
Note: 1. VDD and VDDQ pins are separated each other.
All VDD pins are connected in chip. All VDDQ pins are connected in chip.
2. VSS and VSSQ pins are separated each other
All VSS pins are connected in chip. All VSSQ pins are connected in chip.
Preliminary (April, 2000, Version 1.0)
4
AMIC Technology, Inc.
AMICC [ AMIC TECHNOLOGY ]
