®
PMIB3-ST POSIMAG
Magnetic Scale
Magnetic scale PMIB3-ST for Position Sensor PMIS3
• Easy splicing
• Resistant to moisture and many fluids
• Extensive ruggedness against dust, chipping etc.
• Magnetic scale with stainless steel base
The magnetic material is magnetised in defined and even dis-
tances and works as a solid measure. Reference marks can
be user defined in 4 mm resp. 10 mm steps. The magne-
tic scale retains its firmness by means of a spring steel base
(stainless steel strip CrNi 17 7).
Solid measure
Base material
Masking tape
Measurement ranges
Width
Plastic bounded flexible permanent magnet
Stainless steel CrNi 17 7 / PE
Specifications
Stainless steel (non magnetic)
e.g. 100 ... 2500 mm (up to 50 m on request)
10 mm +0.1 mm / -0.2 mm
Thickness (with masking tape)
Magnetic period
1.7 mm 0.1 mm
2 mm
5 mm
Linearity at 25°C
up to 30 m
up to 50 m
40 µm/m
80 µm/m
40 µm/m
80 µm/m
Reference mark (zero pulse)
Measurement range
max. every 4 mm
must be divisible by 4
11 x 10-6 / K
max. every 10 mm
must be divisible by 10
Linear thermal expansion coefficient
Operation temperature
-10 ...+70°C
An unmagnetic masking tape made of stainless steel is available (accessories). The magnetic scale is
flexible and can be glued to the surface of a cylinder with a minimum radius of 100 mm and used for
angular measurements.
—
—
—
—
—
PMIB3-ST
Order code PMIB3-ST
Model name
Magnetic period
20 = 2 mm / 50 = 5 mm
Mounting of the magnetic scale
N
= adhesive taping
Measurement range (total length = range + X mm, refer to the table on page 12)
e.g. 100, 500, 1000 ... 2500 mm (up to 50 m on request)
Measurement ranges must be divisible by 4 (resp. by 10)
Reference marks/end position marks (optional)
R1 = reference mark on the left / R2 = on the right
E1 = end position mark on the left / E2 = on the right
Additional reference marks every 4 mm (period 2 mm) resp. 10 mm (period 5 mm) from the left
Options
FP = magnetic scale in flat profile
HP = magnetic scale in high profile
AB = masking tape (only with FP or HP)
Order example: PMIB3-ST - 50 - N - 1500 - R1
10
CAT-PM--E-04
ASM GmbH
Tel.: 08123/986-0 Fax: 08123/986-500 www.asm-sensor.com