PMIB3-HT POSIMAG®
Magnetic Scale
Magnetic scale PMIB3-HT for Position Sensor PMIS3
•
Easy splicing
•
Resistant to moisture and many fluids
•
Extensive ruggedness against dust etc.
•
High temperature durability
•
Magnetic scale with stainless steel base
The magnetic material is magnetised in defined and even dis-
tances and works as a solid measure. Reference marks can
be user defined in 4 mm resp. 10 mm steps. The magne-
tic scale retains its firmness by means of a spring steel base
(stainless steel strip CrNi 17 7).
Solid measure
Plastic bonded flexible permanent magnet
Stainless steel CrNi 17 7 / elastomer
Stainless steel (non magnetic)
e.g. 100 ... 2500 mm (up to 50 m on request)
10 mm +0.1 mm / -0.2 mm
1.7 mm ±0.1 mm
2 mm
up to 30 m
up to 50 m
±40 µm/m
±80 µm/m
max. every 4 mm
must be divisible by 4
11 x 10
-6
/ K
-20 ...+120°C
5 mm
±40 µm/m
±80 µm/m
max. every 10 mm
must be divisible by
10
Specifications
Base material
Masking tape
Measurement ranges
Width
Thickness (with masking tape)
Magnetic period
Linearity at 25°C
Reference mark (reference pulse)
Measurement range
Linear thermal expansion coefficient
Operating temperature
An unmagnetic masking tape made of stainless steel is available (accessories). The magnetic scale is
flexible and can be glued to the surface of a cylinder with a minimum radius of 100 mm and used for
angular measurements
.
Order code PMIB3-HT
Model name
Magnetic period
20 = 2 mm / 50 = 5 mm
Mounting of the magnetic scale
N
= adhesive taping
PMIB3-HT
—
—
—
—
—
Measurement range (total length = range + X mm, refer to the table on page 12)
e.g. 100, 500, 1000 ... 2500 mm (up to 50 m on request)
Measurement ranges must be divisible by 4 (resp. by 10)
Reference marks/end position marks (optional)
R1 = reference mark on the left / R2 = on the right
E1 = end position mark on the left / E2 = on the right
Additional reference marks every 4 mm (period 2 mm) resp. 10 mm (period 5 mm) from the left
Options
FP = magnetic scale in flat profile
HP = magnetic scale in high profile
AB = masking tape (only with FP + HP)
Order example: PMIB3-HT - 50 - N - 1500 - R1
ASM GmbH
Tel.: 08123/986-0 Fax: 08123/986-500 www.asm-sensor.com
CAT-PM-E-04
11
ASM-SENSOR [ ASM GMBH ]
