2D Assembly Drawing of ADNB-6011, PCBs and Base Plate
Customer Supplied VCSEL PCB
ADNS-6010 (sensor)
ADNV-6330 (VCSEL)
Customer Supplied PCB
ADNS-6230-001 (clip)
ADNS-6120 (lens)*
Customer Supplied Base Plate
With Recommended Features
Per IGES Drawing
*or ADNS-6130-001 for trim lens
Figure 2. Exploded view drawing
Shown with ADNS-6120 or ADNS-6130-001 Laser Mouse
Lens, ADNS-6230-001 VCSEL Assembly Clip and ADNV-
6330 VCSEL. The components interlock as they are
mounted onto defined features on the base plate.
The ADNS-6010 laser mouse sensor is designed for
mounting on a through hole PCB, looking down. There is
an aperture stop and features on the package that align
to the lens.
The ADNV-6330 VCSEL provides a laser diode with a
single longitudinal and a single transverse mode. It is par-
ticularly suited as lower power consumption and highly
coherent replacement of LEDs. It also provides wider
operation range while still remaining within single-mode,
reliable operating conditions.
The ADNS-6120 or ADNS-6130-001 Laser Mouse Lens is
designed for use with ADNS-6010 sensor and the illumi-
nation subsystem provided by the VCSEL assembly clip
and the VCSEL. Together with the VCSEL, the ADNS-6120
or ADNS-6130-001 lens provides the directed illumina-
tion and optical imaging necessary for proper operation
of the Laser Mouse Sensor. ADNS-6120 or ADNS-6130-
001 is a precision molded optical component and should
be handled with care to avoid scratching of the optical
surfaces. ADNS-6120 has a large round flange to provide
a long creepage path for any ESD events that occur at the
opening of the base plate.
The ADNS-6230-001 VCSEL Assembly Clip is designed to
provide mechanical coupling of the ADNV-6330 VCSEL
to the ADNS-6120 or ADNS-6130-001 lens. This coupling
is essential to achieve the proper illumination alignment
required for the sensor to operate on a wide variety of
surfaces.
Avago Technologies provides an IGES file drawing de-
scribing the base plate molding features for lens and PCB
alignment.
3