Receiver Section
Regulatory Compliance
The receiver section includes a PIN detector with amplifi- The transceiver Regulatory Compliance performance is
cation and quantization circuits. Optical connection to the provided in Table 1 as a figure of merit to assist the de-
Regulatory
provided via an LC optical connector.
Electromagnetic Interference
The overall equipment design will determine the
receiver is
Compliance
signer.
(EMI)
The transceiver Regulatory
Most equipment designs using
level.
certification
RX_LOS
Compliance performance is
the HFBR-57L5AP are subject to
provided in Table 1
contains a loss of signal (RX_LOS)
of
Electrostatic Discharge (ESD)
The receiver section
as a figure of the requirements the FCC in
merit to assist the designer. The
input signal power is
CENELEC
handling precautions for ESD sensitive de-
the United States,
Normal ESD
circuit to indicate when the optical
overall equipment design will
or Fibre Channel compli-
22) in Europe
be followed while using these transceivers.
EN55022 (CISPR
vices should
insufficient for Gigabit Ethernet
determine the certification level.
modulated signal, in- These precautions include using grounded wrist straps,
and VCCI in Japan. The metal
ance. A high signal indicates loss of
housing and shielded design of
dicating link failure such as a broken fiber or nonfunction- work benches and floor mats in ESD controlled areas. Ad-
Electrostatic Discharge (ESD)
the HFBR-57L5AP
ditionally,
al remote transmitter. RX_LOS can be also be monitored
provides
static discharges to the exterior of the equip-
Normal ESD handling
excellent EMI performance.
via the two-wire serial.
sensitive
ment chassis containing the transceiver parts must also
precautions for ESD
be considered.
devices should be followed while
Flammability
Functional Data I/O
using these transceivers. These
The HFBR-57L5AP is compliant
precautions include
fiberoptic transceiver is designed to
Electromagnetic Interference (EMI)
to UL 94V-0.
Avago’s HFBR-57L5AP
using
grounded wrist
standard
work
accept industry
straps,
electrical input differential sig- Most equipment designs using the HFBR-57L5AP are sub-
benches
transceiver
mats in ESD
ac-coupled data inputs ject to the requirements of the FCC in the United States,
nals. The
and floor
has internally
controlled areas.
resistors and coupling capacitors have
and outputs. Bias
Additionally,
CENELEC EN55022 (CISPR 22) in Europe and VCCI in Ja-
static
included within
the exterior
to reduce the number
been
discharges to
the module
pan. The metal housing and shielded design of the HFBR-
of
components required on the customer’s board. Figure
the equipment chassis
57L5AP provides excellent EMI performance.
containing
the recommended interface circuit.
2 illustrates
the transceiver parts
Flammability
must also be considered.
Application Support
An Evaluation Kit and Reference Designs are available to
assist in evaluation of the HFBR-57L5AP.
Please contact your local Field Sales representative for
availability and ordering details.
Table 1. Regulatory Compliance
Feature
Electrostatic Discharge (ESD)
to the Electrical Pins
Electrostatic Discharge (ESD)
to the Optical Connector
Electromagnetic Interference
(EMI)
The HFBR-57L5AP is compliant to UL 94V-0.
Test Method
MIL-STD-883C
Method 3015.4
JEDEC
Variation of IEC 801-2
FCC Class B
CENELEC EN55022 Class B
(CISPR 22A)
VCCI Class 1
Variation of IEC 61000-4-3
Performance
Class 2 (>2000 Volts)
Air discharge of 15 kV (min) contact to connector w/o
damage
System margins are dependent on customer board and
chassis design
Immunity
Lass than 0.5 dB of Rx sensitivity degradation and less
than 10% margin reduction of Tx mask at 10 V/m, 10
MHz to 1 GHz w/o chassis enclosure
CDRH certification #: 9720151-31
TUV file #: 02171216.002
Laser Eye Safety and
Equipment Type Testing
US FDA CDRH AEL Class 1
US21 CFR, Subchapter J per Paragraphs
1002.10 and 1002.12
(IEC) EN60825-1: 1994 + A11+A2
(IEC) EN60825-2: 1994 + A1
(IEC) EN60950: 1992 + A1 + A2 + A3 + A4 + A11
Component Recognition
Underwriters Laboratories and Canadian
Standards Association Joint Component Recognition
for Information Technology Equipment Including
Electrical Business Equipment
UL file #: E173874
4
AVAGO [ AVAGO TECHNOLOGIES LIMITED ]
