DATA SHEET
10. Designing precautions
10 / 12
(1) The current limiting resistor should be placed in the circuit so that is driven within its
rating. Also avoid reverse voltage (over-current) applied instantaneously when ON or OFF.
(2) When pulse driving current is applied, average current consumption should be within the
rating. Also avoid reverse voltage applied when put off.
(3) Recommended soldering pattern
<For reflow soldering>
Unit : mm
Mountability and solderability need to be optimized with actual conditions
such as amount of solder, reflow temperature applied in the process.
(4) When assembling the circuit board into the finished products, care must be taken to avoid
the component parts from touching other parts.
(5) When using multiple LEDs, it is required to connect a current limiting resistor on
each path which the current flows to the LEDs.
(ex-1)
(ex-2)
(ex-3)
R
R
R
R
R
R
R
(6) Other
1) This product complies with RoHS directives.
Symbol
Name
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P1399 08/11
CL-L270-MU1WW1-A1
CITILED
CITIZEN [ CITIZEN ELECTRONICS CO., LTD. ]
