EDS1232AHTA-TI
Electrical Specifications
• All voltages are referenced to VSS (GND).
• After power up, execute power up sequence and initialization sequence before proper device operation is achieved
(refer to the Power up sequence).
Absolute Maximum Ratings
Parameter
Symbol
VT
Rating
Unit
V
Note
Voltage on any pin relative to VSS
Supply voltage relative to VSS
Short circuit output current
Power dissipation
–0.5 to VDD + 0.5 (≤ 4.6 (max.))
VDD
IOS
PD
–0.5 to +4.6
50
V
mA
W
1.0
Operating ambient temperature
Storage temperature
TA
–40 to +85
–55 to +125
°C
°C
Tstg
Caution
Exposing the device to stress above those listed in Absolute Maximum Ratings could cause
permanent damage. The device is not meant to be operated under conditions outside the limits
described in the operational section of this specification. Exposure to Absolute Maximum Rating
conditions for extended periods may affect device reliability.
Recommended DC Operating Conditions (TA = –40°C to +85°C)
Parameter
Symbol
VDD, VDDQ
VSS, VSSQ
VIH
min.
3.0
0
max.
Unit
V
Notes
Supply voltage
3.6
1
2
3
4
0
V
Input high voltage
Input low voltage
2.0
–0.3
VDD + 0.3
0.8
V
VIL
V
Notes: 1. The supply voltage with all VDDand VDDQ pins must be on the same level.
2. The supply voltage with all VSS and VSSQ pins must be on the same level.
3. VIH (max.) = VDD + 1.5V (pulse width ≤ 5ns).
4. VIL (min.) = VSS – 1.5V (pulse width ≤ 5ns).
Data Sheet E1164E20 (Ver. 2.0)
4
ELPIDA [ ELPIDA MEMORY ]
