MINIMUM RECOMMENDED FOOTPRINT FOR SMALL AND SUPER SMALL PACKAGES
Surface mount board layout is a critical portion of the total
design. The footprint for the semiconductor package must be
the correct size to ensure proper solder connection interface
between the board and the package. With the correct pad
geometry, the packages will self-align when subjected to a
solder reflow process. It is always recommended to fabricate
boards with a solder mask layer to avoid bridging and/or
shorting between solder pads, especially on tight tolerances
and/or tight layouts.
0.660
16.76
0.100 TYP
2.54
0.060 TYP 8X
1.52
0.300
7.62
0.100 TYP 8X
2.54
inch
mm
Figure 5. SOP Footprint (Case 482)
0.050
1.27
TYP
0.150
3.81
0.387
9.83
0.027 TYP 8X
0.69
0.053 TYP 8X
1.35
inch
mm
Figure 6. SSOP Footprint (Case 1317 and 1317A)
MPXA6115A
6
Sensors
Freescale Semiconductor
FREESCALE [ FREESCALE SEMICONDUCTOR, INC ]
