MB90495G Series
(Continued)
Part Number
Parameter
Delayed interrupt generation
module
DTP/external interrupt circuit
MB90F497G
MB90497G
MB90F498G
MB90V495G
Module for delayed interrupt generation switching tasks
Used in real-time OS
Number of inputs : 8
Starting by rising edge, falling edge, “H” level input, or “L” level input, external
interrupts or extended intelligent I/O service (EI
2
OS) can be used
Number of channels : 8
Resolution : set 10-bit or 8-bit
Conversion time : 6.13
µs
(with 16-MHz machine clock, including sampling time)
Continuous conversion of multiple linked channels possible
(up to 8 channels can be set)
One-shot conversion mode : converts selected channel only once
Continuous conversion mode : converts selected channel continuously
Stop conversion mode : converts selected channel and suspends operation
repeatedly
Number of channels : 1
Clock-synchronous forwarding : 62.5 Kbps to 2 Mbps
Clock-asynchronous forwarding : 1,202 bps to 62,500 bps
Transmission can be performed by two-way serial transmission or by master/
slave connection
Number of channels : 1
Clock-synchronous forwarding : 62.5 Kbps to 2 Mbps
Clock-asynchronous forwarding : 9,615 bps to 500 Kbps
Transmission can be performed by two-way serial transmission or by master/
slave connection
Compliant with CAN specification versions 2.0A and 2.0B
Send/receive message buffers : 8
Forwarding bit rate : 10 Kbps to 1 Mbps (with 16-MHz machine clock)
8/10-bit A/D converter
UART0 (SCI)
UART1 (SCI)
CAN
s
PACKAGES AND CORRESPONDING PRODUCTS
Package
FPT-64P-M06
FPT-64P-M09
: available
×
: not available
Note : See “Package Dimensions” for details.
MB90F497G
MB90497G
MB90F498G
s
PRODUCT COMPARISON
Memory Size
When evaluating with evaluation chips and other means, take careful note of the different between the evaluation
chip and the chip actually used. Take particular note of the following.
• While the MB90V495G does not feature an on-chip ROM, the dedicated development tool can be used to
achieve operation equivalent to a product with built-in ROM. Therefore, the ROM size is configured by the
development tool.
• On the MB90V495G, the FF4000
H
to FFFFFF
H
image is only visible in the 00 bank, and the FE0000
H
to
FF3FFF
H
is only visible in the FE and FF banks (configurable on development tool) .
• On the MB90F497G/F498G/497G, the FF4000
H
to FFFFFF
H
image is visible in the 00 bank, and the FF0000
H
to FF3FFF
H
is visible only in the FF bank.
5
FUJITSU [ FUJITSU COMPONENT LIMITED. ]
