Standard Applications
The MPS-8 is the Main Power Supply for the IF632 and
IF650 FACPs. The MPS-8 provides 4.0 amps for system
power and 4.0 amps for signal power. The MPS-8 also pro-
vides power monitoring and battery charging capabilities
for the system.
The APS-8 is used whenever additional signal power or 24
VDC auxiliary power is required. The APS-8 connects
directly to the USM signal module to simplify system design
and installation. An unlimited number of APS-8 power sup-
plies may be added to a system without affecting system
I/O capacity.
Specifications
Primary Input
Secondary Input
Output
120 VAC
24 VDC (nominal)
8.0A @ 24 VDC (nominal)
Ordering Information
Part Number Description
MPS-8
Main power supply, 8.0A @ 24 VDC,
complete with lead acid battery charger
module
Auxiliary power supply, 8.0A @ 24 VDC,
chassis-mounted for IF650 FACPs
Auxiliary power supply, 8.0A @ 24 VDC,
chassis-mounted for IF632 FACPs
(Max. 2 per cabinet)
APS-8
APS632-8
Engineer’s Specifications
The Fire Alarm System shall be provided with an integral
8.0 amp power supply. The power supply shall be fully
supervised and shall monitor for the presence of main AC
power as well as battery power. The Main Power Supply
shall also monitor for low/no battery and brownout condi-
tions. The Main Power Supply shall be capable of charging
60 AH batteries and shall be equipped with automatic high-
rate circuitry. The Main Power Supply shall be Gamewell-
FCI Model MPS-8.
Auxiliary power supplies shall be supplied as required to
power all signals and auxiliary devices. The Auxiliary
Power Supply shall provide 8.0 amp of full-wave rectified
power. Provisions shall be made on the Auxiliary Power
Supply for battery backup as required. The Auxiliary Power
Supplies shall be Gamewell-FCI Model APS-8 or APS632-
8.
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
www.gamewell-fci.com
CS-2023 Rev. A page 2 of 2
GAMEWELL-FCI [ GAMEWELL-FCI BY HONEYWELL ]
