Cannon Trident Connectors
Snap Together - Rectangular
How to Order
Typical Nomenclature:
TST 02
P
A
0
0
*
Series
Plating Style
TST = Trident Snap Together
T
Y
Z
*
= Tin
= Gold
= Gold Flash
Number of Contacts
=
None (no contacts)
02
03
04
06
12
24
36
Contact Type
0 = No Contacts (Standard for Plug and Panel
Mounted Receptacle)
1 = Machined Solder Tail Pin
2 = Machined Solder Tail Socket
5 = Formed Stamped Solder Tail Pin
6 = Formed Stamped Solder Tail Socket
Color of Moulding
0 = Black
Type
PA
RB
Plug; Free
Receptacle; For PCB, with Mounting Lugs
Receptacle; Panel Mounting
(delivered without any contacts)
Receptacle, For PCB, 90° Right Angle Mounting
(only for 12 position connectors with machined contacts)
RA
RR
AS
Accessory; Receptacle Shroud
AH
Accessory; Plug Strain Relief Hood
Test Specifications
The table below summarizes the results of key tests. Data is applicable to standard connectors with standard contacts.
Variations may affect this data, so please consult factory for further information on your requirements.
Test
Method
Criteria of Acceptance
No breakdown
Dielectric Withstanding Voltage
Thermal Shock
Physical Shock
2000 V ac
-55°C to +125°C (-67°F to +257°F), 5 cycles
No physical damage
50 g’s peak, 3 axes,
11 millisecond duration half-sine pulse
No physical damage.
No loss of continuity >1 sec
Vibration
10 g’s peak,
10-500 Hz, 9 hours
No physical damage,
No loss of continuity >1 sec
Durability
500 cycles of mating and unmating,
500 mating cycles max
No mechanical or
electrical defects
Salt Spray
48 hours
Shall be capable of mating and unmating
and meet contact resistance requirements
High Temperature Endurance
1000 hours at 125°C (+257°F)
Insulation Resistance > 100 MΩ
Humidy Steady State
Moisture Resistance
RH 90-95%, 40°C (+104°F), 504 hours
10 Cycles
Insulation Resistance > 100 MΩ
Insulation Resistance > 100 MΩ
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
8
ITT [ ITT Cannon ]
