KOA SPEER ELECTRONICS, INC.
SS-227 R2
(2) Reel specifications for taping
(3) Standard Packing Quantity
Series Name
Quantity
4,000 pcs/reel
KGM0603 Series
E
C
KGM0805 Series
KGM1206 Series
KGM1812 Series
4,000 pcs/reel
2,000 pcs/reel
1,000 pcs/reel
D
B
A
W
Dimensions in inches (mm)
Series
0603
A
B
C
D
E
W (min)
W (max)
0.429 0.059
(10.9 1.5)
0.311 0.059
(7.9 1.5)
0805
+0.02
7.00 0.78
(178 2)
2.36
(60 min)
0.511 -0.008
.
0.83 0.03 0.079 0.02
(21 0.8)
––––
1206
+0.5
-0.2
(13
)
(2 0.5)
0.468 0.059 0.606 0.059
(11.9 1.5) (15.4 1.5)
1812
10. Soldering
Flux shall be Rosin type. Do not use strong
acid type fluxes.
KOA filters have Ag (or Ag-Pd) Ni barrier
terminals, overplated with Sn for use in
either wave or reflow soldering processes.
The tip of soldering iron should be 20 W.
3 mmø maximum.
Ceramics are very sensitive in general to
thermal shock. Therefore KOA filters should
not be exposed to sudden temperature
increases or partial heating.
The tip of soldering iron should be 220 -
250°C maximum. Care must be taken
not to physically damage the chip through
abnormal contact with soldering irons.
Prior to soldering, KOA filters shall be
preheated so that the temperature difference
during soldering will be kept within 130°C.
It is desirable that soldering temperature be
kept to 240 ~ 250°C and soldering time be
within 4 seconds.
PAGE 8 OF 8
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Bolivar Drive
P.O. Box 547
Bradford, PA 16701
USA
814-362-5536
Fax 814-362-8883
www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
KOA [ KOA SPEER ELECTRONICS, INC. ]
