LTC2978
PMBus COMMAND DESCRIPTION
MFR_WATCHDOG_T_POR and MFR_WATCHDOG_T Data Contents
BIT(S) SYMBOL
OPERATION
b[1ꢀ:±] Mfr_watchdog_t_first The data uses the L11 format.
Mfr_watchdog_t
These timers operate on an internal clock. The Mfr_watchdog_t timer will align to SHARE_CLK if it is running.
Delays are rounded to the nearest 1±µs for _t and 1ms for _t_first.
Writing a zero value for Y to the Mfr_watchdog_t or Mfr_watchdog_t_first registers will disable the watchdog timer.
Units: ms. Max timeout is ±.6 sec for _t and 6ꢀ sec for _t_first
MFR_PAGE_FF_MASK
The MFR_PAGE_FF_MASK command is used to select which channels respond when the global page command
(PAGE=±xFF) is in use.
MFR_PAGE_FF_MASK Data Contents
BIT(S) SYMBOL
OPERATION
b[7] Mfr_page_ff_mask_chan7
Channel 7 masking of global page command (PAGE=±xFF) accesses
± = ignore global page command accesses
1 = fully respond to global page command accesses
Channel 6 masking of global page command (PAGE=±xFF) accesses
± = ignore global page command accesses
b[6] Mfr_page_ff_mask_chan6
b[ꢀ] Mfr_page_ff_mask_chanꢀ
b[4] Mfr_page_ff_mask_chan4
b[3] Mfr_page_ff_mask_chan3
b[2] Mfr_page_ff_mask_chan2
b[1] Mfr_page_ff_mask_chan1
b[±] Mfr_page_ff_mask_chan±
1 = fully respond to global page command accesses
Channel ꢀ masking of global page command (PAGE=±xFF) accesses
± = ignore global page command accesses
1 = fully respond to global page command accesses
Channel 4 masking of global page command (PAGE=±xFF) accesses
± = ignore global page command accesses
1 = fully respond to global page command accesses
Channel 3 masking of global page command (PAGE=±xFF) accesses
± = ignore global page command accesses
1 = fully respond to global page command accesses
Channel 2 masking of global page command (PAGE=±xFF) accesses
± = ignore global page command accesses
1 = fully respond to global page command accesses
Channel 1 masking of global page command (PAGE=±xFF) accesses
± = ignore global page command accesses
1 = fully respond to global page command accesses
Channel ± masking of global page command (PAGE=±xFF) accesses
± = ignore global page command accesses
1 = fully respond to global page command accesses
2978fc
51