MADRCC0002
Dual Linear Driver for Vector Modulators
Rev. V7
Figure 3A - Phase and Attenuation of SA90-0001,
Vector Modulator Linearized with MADRCC0002 Linearizer
3,4,5,6
(y)
90°
45°
bias 1 = 0.0V
0.5V
1.0V
bias 2 = 5.0V
3.5V
3.0V
2.5V
2.0V
1.5V
1.0V
0.5V
bias 2 = 0.0V
(x)
0°
1.5V
2.0V
2.5V
3.0V
3.5V
bias 1 = 5.0V
Figure 3B
bias 1 = 0V
bias 2 = +5V
bias 1 = 0V
bias 2 = 0V
(y)
90°
45°
Loss = 22 dB
Loss = 17 dB
Loss = 12 dB
(x)
0°
bias 1 = +5V
bias 2 = +5V
bias 1 = +5V
bias 2 = 0V
Reflection
coefficient = 0.5
3.
4.
5.
6.
6
Tic marks on x,y axes refer to reflection coefficient in increments of 0.1V. Reflection coefficients vary from -0.5 to +0.5 on both the x and y axes.
Data is for vector modulators driven by linearizers per attached schematic.
Inputs to the linearizers vary from 0 to 5V.
The phase with the inputs to both linearizers set to +5V is arbitrarily called zero degrees.
ADVANCED:
Data Sheets contain information regarding a product M/A-COM Technology Solutions
•
North America
Tel: 800.366.2266 •
Europe
Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
•
India
Tel: +91.80.4155721
•
China
Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY:
Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.