THERMATEL
Switch Sensors
Twin-Tip Sensors
are mounted at the end of each tip.
Spherical Sensors
are bonded directly to the wall of
the tip for greater sensitivity and sensor protection.
Probe pressure and temperature ratings are dependent
upon process connection; maximum pressure and
temperature ratings are shown below.
Twin-Tip Sensor
General Use:
Material Options:
Process Connections:
Max Temperature:
Max Pressure:
Insertion Lengths:
General purpose and corrosive resistant applications
316 stainless steel, Hastelloy C-276, or Monel
NPT threads, G threads, ANSI flanges, EN/DIN flanges
+400° F (+200° C)
3,000 psig (207 bar) – 1850 psi (127 bar) extended length
2 to 130 inches (50 to 3,300 mm)
Spherical-Tip Sensor
General Use:
Material:
Process Connections:
Max Temperature:
Max Pressure:
Insertion Lengths:
General purpose service and high-viscosity applications
316 stainless steel
NPT threads, G threads, ANSI flanges, EN/DIN flanges, hygienic
+400° F (+200° C)
600 psi (40 bar)
2 to 130 inches (50 to 3,300 mm)
High-Temperature Sensor
General Use:
Material:
Process Connections:
Max Temperature:
Max Pressure:
Insertion Lengths:
For high-temperature process environments
316 stainless steel; Hastelloy C-276
NPT threads, G threads, ANSI flanges, EN/DIN flanges
+850° F (+454° C)
6,000 psi (413 bar)
2 to 36 inches (50 to 900 mm)
Low Flow Body Sensor
General Use:
Low flow detection; suitable for chemical
feed pumps, additive flow, pump seals,
process analyzers
316 stainless steel
0.055 to 3 gallons/hour
(0.02 to 11.5 liters/hr.)
1
Material:
Flow Rate:
Process Connections:
Max Temperature:
Max Pressure:
⁄
4
" and
1
⁄
2
" NPT, and G threads
+400° F (+200° C)
5,800 psi (400 bar)
Mini Sensor
General Use:
Material:
Max Temperature:
Max Pressure:
Insertion Length:
Probes specifically designed to fit into a
1
⁄
2
",
3
⁄
4
", or 1" Tee
316 stainless steel
+400° F (+200° C)
3,000 psig (207 bar) – 1850 psi (127 bar) extended length
1 to 130 inches (25 to 3300 mm)
10
MAGNETROL [ MAGNETROL INTERNATIONAL, INC. ]
