HAL55x, HAL56x
3.4. Absolute Maximum Ratings
Symbol
V
DD
I
DDZ
T
S
T
J
Parameter
Supply Voltage
Supply Current through
Protection Device
Storage Temperature Range
Junction Temperature Range
Pin No.
1
1
Min.
–15
1) 2)
–50
2)
–200
3)
–65
–40
–40
Max.
28
2)
50
2)
200
3)
150
150
170
4)
Unit
V
mA
mA
°C
°C
1)
–18 V with a 100
Ω
series resistor at
2)
as long as T max is not exceeded
J
2)
with a 220
Ω
series resistance at pin
3)
t < 2 ms
4)
t < 1000 h
pin 1 (–16 V with a 30
Ω
series resistor)
1 corresponding to test circuit 1 (see Fig. 5–3)
Stresses beyond those listed in the “Absolute Maximum Ratings” may cause permanent damage to the device. This
is a stress rating only. Functional operation of the device at these or any other conditions beyond those indicated in the
“Recommended Operating Conditions/Characteristics” of this specification is not implied. Exposure to absolute maxi-
mum ratings conditions for extended periods may affect device reliability.
3.5. Recommended Operating Conditions
Symbol
V
DD
T
A
t
on
Parameter
Supply Voltage
Ambient Temperature for continuos
operation
Supply Time for pulsed mode
V
DD
≤
16 V
Pin No.
1
Min.
4
–40
–40
30
Max.
24
85
1)
125
2)
–
Unit
V
°C
°C
µs
1)
when using the “A” type or the ”K” type and
2)
when using the “A” type and V
DD
≤
13.2 V
Note:
Due to the high power dissipation at high current consumption, there is a difference between the ambient temper-
ature (T
A
) and junction temperature. The power dissipation can be reduced by repeatedly switching the supply voltage
on and off (pulse mode). Please refer to section 5.4. on page 19 for details.
Micronas
7