MP6211/MP6212 –CURRENT-LIMITED POWER DISTRIBUTION SWITCHES
ORDERING INFORMATION
Maximum
Typical Short-
Top
Marking
Part Number* Enable Switch
Continuous Circuit Current Package
Load Current
Temperature
@ TA=25C
Active
High
MP6211DN
MP6211DH
MP6212DN
MP6212DH
Single
Single
Single
Single
1.0A
1.5A
SOIC8E
MSOP8E
SOIC8E
MSOP8E
6211D
6212D
Active
High
1.0A
1.0A
1.0A
1.5A
1.5A
1.5A
–40°C to +85°C
Active
Low
Active
Low
* For Tape & Reel, add suffix –Z (eg. MP6211_MP6212DN–Z). For RoHS Compliant Packaging, add suffix –LF.
(eg. MP6211_MP6212DN–LF–Z)
PACKAGE REFERENCE
TOP VIEW
GND
IN
1
2
3
4
8
7
6
5
NC
OUT
OUT
FLAG
IN
EN*
EXPOSED PAD
ON BACKSIDE
MP6211_MP6212
Single-Channel
(* EN is active high for MP6211)
ABSOLUTE MAXIMUM RATINGS (1)
Thermal Resistance (3)
SOIC8E ..................................50...... 10... °C/W
MSOP8E.................................55...... 12... °C/W
θJA
θJC
IN .................................................-0.3V to +6.0V
EN, FLAG, OUT to GND..............-0.3V to +6.0V
Continuous Power Dissipation. (TA = +25°C) (2)
SOIC8E...................................................... 2.5W
MSOP8E.................................................... 2.3W
Junction Temperature...............................150°C
Lead Temperature ....................................260°C
Storage Temperature...............–65°C to +150°C
Operating Temperature..............–40°C to +85°C
Notes:
1) Exceeding these ratings may damage the device.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature TJ (MAX), the junction-to-
ambient thermal resistance θJA, and the ambient temperature
TA. The maximum allowable continuous power dissipation at
any ambient temperature is calculated by PD (MAX) = (TJ
(MAX)-TA)/θJA. Exceeding the maximum allowable power
dissipation will cause excessive die temperature, and the
regulator will go into thermal shutdown. Internal thermal
shutdown circuitry protects the device from permanent
damage.
3) Measured on JESD51-7 4-layer PCB.
MP6211_MP6212 Rev. 1.1
9/18/2009
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2009 MPS. All Rights Reserved.
2
MPS [ MONOLITHIC POWER SYSTEMS ]
