SM8578BV
INTERRUPT HANDLING
Alarm Interrupt
I
I
If AIE = 1 when the alarm occurs, output INTN goes LOW. If AIE = 0, INTN is in high impedance state.
The alarm interrupt is output when the 10s seconds digit carries over to the minutes digit.
"1"
AIE bit
No output while AIE is "0"
Hi−Z
INTN output
LOW−level
"1"
AF bit
"0"
Alarm interrupt
timing
"0"
Data 0 written to AF
Timer Interrupt
I
The TI/TP bit setting selects either level interrupt mode or periodic interrupt mode output (with the AIE and
FE bits set to “0”).
(1) Level interrupt mode (TI/TP = “0”)
I
If TIE = “1” when the interrupt occurs, output INTN goes LOW. If TIE = “0”, INTN is in high imped-
ance state.
"1"
TIE bit
No output
while TIE is "0"
INTN output
LOW−level
"1"
TF bit
"0"
Timer interrupt
timing
Data 0 written to TF
"0"
Hi−Z
NIPPON PRECISION CIRCUITS INC.—11