PerFormanCe POWER PFC500
ENVIRONMENTAL SPECIFICATIONS
PARAMETER
CONDITIONS/DESCRIPTION
MIN
NOM
MAX
UNITS
Altitude
Operating Temperature
Operating.
Non-Operating.
Derate linearly above 50°C by 2.5% per °C.
At 100% load
At 50% load
0
0
-55
Storage Temperature
Forced Air Cooling
10k
40k
50
70
85
ASL Ft.
ASL Ft.
°C
°C
°C
Temperature Coefficient
Relative Humidity
Shock
Vibration
Forced air cooling of 300 LFM is required if the internal fan is not specified.
Cooling air velocity is measured 1/4" above, at the middle of the chassis.
Airflow direction is from the input section to the output section.
0°C to 70°C (after 15 minute warm-up).
Non-Condensing.
Operating: 10±3mSec, 3 axis, Half Sine.
Non-operating: 10±3mSec, 3 axis, Half Sine.
Operating:
5-32Hz
32-2000Hz Sinusoidal
Non-operating:
±0.02
5
±0.05
95
20
40
0.02
1
6.15
%/°C
%RH
G
in (DA)
G
PK
G
RMS
OPTIONS
DESCRIPTION
NOTES
SIZE IMPACT
Isolation Diodes
Fan
Metric Mounting
Add “D” as a suffix to the model number to order factory installed isolation diodes
for parallel or redundant operation.
Add “F” as a suffix to the model number to order integral fan.
(provides required 300 LFM of forced air cooling).
Add “M” as a suffix to the model number to order chassis with
M4 x 0.7 mounting inserts.
N/A
10.50" x 5.00" x 2.50"
(266.7mm x 127.0mm x 63.5mm)
N/A
For the Most Up-To-Date Information
www.power-one.com
24 Hours/Day—7 Days/Week
NUCLEAR AND MEDICAL APPLICATIONS Power-One products are not authorized for use as critical components in life support systems, equipment used in hazardous environments,
or nuclear control systems without the express written consent of the President of Power-One, Inc.
TECHNICAL REVISIONS The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are
subject to change without notice.
3
POWER-ONE [ POWER-ONE ]
