40PC Series
Fully signal conditioned pressure transducer
PRESSURE RANGE SPECIFICATIONS
(unless otherwise noted, VS = 5.00 V, RL > 100 kΩ, tamb = 25°C)
Part number
40PC001B2A
40PC006G2A
40PC015G2A
40PC015V2A
40PC030G2A
40PC100G2A
40PC150G2A
40PC250G2A
40PC500G2A
Operating pressure range
0 ... ±50 mmHg
0 ... 300 mmHg
0 ... 15 psig
Proof pressure1
170 mmHg
650 mmHg
45 psi
Sensitivity (typ.)
40.0 mV/mmHg
13.33 mV/mmHg
266.7 mV/psi
-266.7 mV/psi
133.3 mV/psi
40.0 mV/psi
0 ... -15 psig
30 psi
0 ... 30 psig
60 psi
0 ... 100 psig
200 psi
0 ... 150 psig
300 psi
25.7 mV/psi
0 ... 250 psig
500 psi
16.0 mV/psi
0 ... 500 psig
1000 psi
8.0 mV/psi
Specification notes:
Proof pressure is the maximum pressure which may be applied without causing damage to the sensing element.
Non-linearity - the maximum deviation of measured output at constant temperature, from "Best Straight Line" through
three points (offset pressure, full scale pressure and 1/2 full scale pressure).
1.
2.
Thermal effects tested and guaranteed in the specified temperature ranges relative to 25°C. All specifications shown
are relative to 25°C.
3.
Span is the algebraic difference between lowest and highest specified pressure.
4.
5.
Total accuracy is the maximum deviation from the 25°C reference transfer function at any pressure or temperature over
the specified ranges. This calculation includes null, span, linearity, hysteresis, repeatability, null shift and span shift.
Response time for 0 to full-scale pressure step change, readings taken at 10 % and 90 % of full-scale pressure.
6.
2/8
November 2007 / 573
www.sensortechnics.com