SAB
SAB
SAF
SAF
2.3 Transparent Mode 1 (MODE: MDS1, MDS0, ADM = 101)
Characteristics: address recognition high byte
82525
82526
82525
82526
Only the high byte of a 2-byte address field will be compared. The whole frame except the first
address byte will be stored in RFIFO. RAL1 contains the second and RHCR the third byte
following the opening flag.
2.4 Transparent Mode 0 (MODE: MDS1, MDS0, ADM = 100)
Characteristics: no address recognition
No address recognition is performed and each frame will be stored in the RFIFO. RAL1
contains the first and RHCR the second byte following the opening flag.
2.5 Extended Transparent Modes 0; 1 (MODE: MDS1, MDS0 = 11)
Characteristics: fully transparent
In extended transparent modes, fully transparent data transmission/reception without HDLC
framing is performed, i.e. without FLAG generation/recognition, CRC generation/check, bit-
stuffing mechanism. This allows user specific protocol variations or the usage of Character
Oriented Protocols (such as IBM BISYNC).
Data transmission is always performed out of the XFIFO. In extended transparent mode 0
(ADM = 0), data reception is done via the RAL1 register, which always contains the actual data
byte assembled at the RxD pin. In extended transparent mode 1 (ADM = 1), the receive data
are additional shifted into the RFIFO.
Also refer to chapter 6.1 and 6.2.
Semiconductor Group
25
SIEMENS [ Siemens Semiconductor Group ]
