Multiple Channel 1°C Temperature Sensors with Beta Compensation
Datasheet
Chapter 10 Document Revision History
Table 10.1 Customer Revision History
REVISION LEVEL & DATE
Rev. 1.41 (02-23-12)
SECTION/FIGURE/ENTRY
CORRECTION
Labeled exposed pad in pinout figure and added
row in pin description table. Recommendation is to
ground the exposed pad.
Added conditions for t
HD:DAT
. Data hold time
minimum of 0.3µs is required when receiving from
the master.
Renamed from “SMBus and I2C Compliance.” First
paragraph, added first sentence: “The EMC1413 /
EMC1414 is compatible with SMBus and I
2
C.”
And added last sentence: “For information on
using the EMC1413 / EMC1414 in an I
2
C system,
refer to SMSC AN 14.0 SMSC Dedicated Slave
Devices in I
2
C Systems.”
Updated to include EMC1414.
Rev. 1.40 (01-05-12)
Rev. 1.39 (06-07-11)
Figure 3.2, "EMC1413 /
EMC1414 Pin Diagram,
DFN-10"
Ordering Information
Added.
Added EMC1414-A-AIA to ordering information
table.
Filter MAX changed from “2.5nF” to “2.7nF”.
Set revision ID to 04h.
Updated error on ACK bit settings and reorganized
chapter information and moved ALERT pin
considerations.
Reorganized information for temperature
monitoring and ALERT pin considerations.
Changed default from 01h to 03h to match the
actual value.
Added EMC1414-A-AIA-TR in a 10-pin DFN
Updated voltage on 5V tolerant pins with pull up
from -0.3 to 3.6 to 0 to 3.6.
Added package information for the TDFN.
Added package marking information for the TDFN.
Rev. 1.38 (09-30-10)
Rev. 1.37 (12-23-09)
Ordering Information
SMSC EMC1413 / EMC1414
51
Revision 1.41 (02-23-12)
DATASHEET