Small Form Factor Three Port 10/100 Managed Ethernet Switch with Single MII/RMII/Turbo MII
Datasheet
BITS
DESCRIPTION
Configuration Loaded (CFG_LOADED)
TYPE
DEFAULT
16
RO
0b
When set, this bit indicates that a valid EEPROM was found and the
EEPROM Loader completed normally. This bit is set upon a successful load.
It is cleared on power-up, pin and Digital Reset (DIGITAL_RST) resets, or
at the start of a RELOAD.
This bit is cleared when written high.
15:0
EEPROM Controller Address (EPC_ADDRESS)
This field is used by the EEPROM Controller to address a specific memory
location in the serial EEPROM. This address must be byte aligned.
R/W
0000h
Revision 1.3 (08-27-09)
150
SMSC LAN9303/LAN9303i
DATASHEET