Z8 Encore! XP
®
4K Series
Product Specification
149
Option Bit Types
User Option Bits
The user option bits are contained in the first two bytes of program memory. User access
to these bits has been provided because these locations contain application-specific device
configurations. The information contained here is lost when page 0 of the program mem-
ory is erased.
Trim Option Bits
The trim option bits are contained in the information page of the Flash memory. These bits
are factory programmed values required to optimize the operation of onboard analog cir-
cuitry and cannot be permanently altered by the user. Program memory may be erased
without endangering these values. It is possible to alter working values of these bits by
accessing the Trim Bit Address and Data Registers, but these working values are lost after
a power loss or any other reset event.
There are 32 bytes of trim data. To modify one of these values the user code must first
write a value between
00H
and
1FH
into the Trim Bit Address Register. The next write to
the Trim Bit Data register changes the working value of the target trim data byte.
Reading the trim data requires the user code to write a value between
00H
and
1FH
into the
Trim Bit Address Register. The next read from the Trim Bit Data register returns the work-
ing value of the target trim data byte.
Note:
The trim address range is from information address 20-3F only. The remainder of the
information page is not accessible through the trim bit address and data registers.
Calibration Option Bits
The calibration option bits are also contained in the information page. These bits are fac-
tory programmed values intended for use in software correcting the device’s analog per-
formance. To read these values, the user code must employ the LDC instruction to access
the information area of the address space as defined in
Serialization Bits
As an optional feature, ZiLOG is able to provide factory-programmed serialization. For
serialized products, the individual devices will be programmed with unique serial num-
bers. These serial numbers are binary values, four bytes in length. The numbers increase in
size with each device, but gaps in the serial sequence may exist.
These serial numbers are stored in the flash information page (see
and
for more details) and are
unaffected by mass erasure of the device's flash memory.
PS022815-0206
Flash Option Bits
ZILOG [ ZILOG, INC. ]
