BL1102series
“Pause” key operation
a . Pause function can be stored in memory storage.
b . Pause function can be performed when general dialing or re-dial or memory dialing.
pulse
→
tone mode convert ( * / T )
a . If mode switch is set as pulse，output signal will be
：
D1，D2，…，Dn，pause (3.1 minutes)
，D1’,
D2’,
…，Dn’
( pulse )
( tone )
b . If the mode switch is set as tone, output signal will be
：
D1，D2，…
，Dn，*/T，D1’,
D2’，…，Dn’
( tone )
( tone ) ( tone )
c . If the tone mode remains since the number is dialed out, pulse mode can be recovered as long as do on-hook
operation.
FLASH
a . “flash” key can not be stored in the memory , but it enjoys the most high priority in all keyboard functions.
b . after pressing “ flash” key，dialer will recover to the original status.
Number Storage
a . Dialing out D1，D2，… Dn first, then press the storage key S
b . D1，D2，…，Dn numbers are stored in the position “ Mn or Ln”and dialed out.
a . D1, D2，…，Dn are stored in Mn or L n but will not be dialed out.
b . P and * / T key can be stored in the memory as one digit
，P
key indicates “pause”.
http://www.belling.com.cn
-4-
8/22/2006
Wrote by 2006
Total
9 Pages
BELLING [ SHANGHAI BELLING CO., LTD. ]
