ABSOLUTEMAXIMUMRATINGS
These are stress ratings only and functional operation of the device at
these ratings or any other above those indicated in the operation
sections of the specifications below is not implied. Exposure to absolute
maximum rating conditions for extended periods of time may affect
reliability and cause permanent damage to the device.
VCC..................................................................................-0.3V to 6.0V
VBATT................................................................................-0.3V to 6.0V
AllOtherInputs(NOTE1).................................-0.3VtothehigherofVCC orVBATT
Continuous Input Current:
VCC..................................................................................100mA
VBATT..................................................................................20mA
GND..................................................................................20mA
WDI, PFI...........................................................................20mA
Continuous Output Current:
RESET, RESET, PFO.........................................................20mA
VOUT......................................................................................100mA
Power Dissipation per Package:
8pin NSOIC (derate 6.14mW/°C above +70°C)..............500mW
8pin PDIP (derate 11.8mW/°C above +70°C)..............1,000mW
Storage Temperature........................................-65°C to +160°C
Lead Temperature(soldering,10sec).............................................+300°C
ESD Rating........................................................4KV Human Body Model
SPECIFICATIONS
VCC = 3.17V to 5.50V for the SP690T/SP80_T, VCC = 3.02V to 5.50V for the SP690S/SP80_S, VCC = 2.72V to 5.50V for the SP690R/SP80_R, VBATT = 3.60V, and
TA = TMIN to TMAX unless otherwise noted. Typical values taken at TAMB = +25OC.
PARAMETERS
MIN.
TYP.
MAX. UNITS CONDITIONS
Operating Voltage Range,
1.0
5.5
Volts
VCC or VBATTERY, NOTE 1
µA
µA
VCC Supply Current, ISUPPLY
25
20
40
40
excluding IOUT
VCC Supply Current in Battery
Backup Mode
VCC=2.0V,VBATTERY=2.3V,
excluding IOUT
VBATTERY Supply Current in
Any Mode, NOTE 2
µA
0.4
1
excluding IOUT
VBATTERY Leakage Current, NOTE 3
VBATTERY Leakage Current, NOTE 4
Output Voltage, VOUT
µA
µA
0.001
0.5
-0.1
3.3V > VCC >VBATTERY + 0.2V
0.02
VCC - 0.03
VCC - 0.3
VCC - 0.0075
VCC - 0.075
VCC - 0.0003
I = 5mA
V
V
IOUT = 50mA
VCC - 0.0015
IOUT = 250µA, VCC > 2.5V
VOUT in Battery-Backup Mode
VBATTERY - 0.02 VBATTERY - 0.0045
VBATTERY - 0.018
IOUT = 250µA, VBATTERY = 2.3V
IOUT = 1mA, VBATTERY = 2.3V
IOUT = 10mA, VBATTERY = 3.3V
VBATTERY - 0.15
Battery Switch Threshold,
VCC falling
0.065
2.30
0.025
2.40
VBATTERY - VCC, VSW > VCC > 1.75V, NOTE 5
VBATTERY > VCC, NOTE 6
V
V
2.50
Battery Switch Threshold,
VCC rising, NOTE 7
Values are identical to the Reset
Threshold values at VCC rising
SP690T/S/R JAN 30-06 SP690T/S/R, 802/T/S/R, 804T/S/R, 805T/S/R Low Power Microprocessor Supervisory
© 2006 Sipex Corporation
2