Document Reference No.: FT_000327
Vinculo Development Module Datasheet Version 1.0
Clearance No.: FTDI#173
3.5 Configuration Jumpers
There are two configuration jumper links on the Vinculo.
JP1 is used to select the Vinculo power source.
JP2 is used to select the reference voltage for the ADC (U2)
1-2
2-3
Vinculo is Powered from USB
Vinculo is Powered from
external 9V supply
JP1
host via CN3
JP2
ADC reference voltage = 3V3
ADC reference voltage = 5V0
Table 3.4 – Jumper Options
Copyright © 2010 Future Technology Devices International Limited
8