Electrical Specifications
Figure 2-2. V
CC
Static and Transient Tolerance for 775_VR_CONFIG_04A
Icc [A]
0
VID - 0.000
10
20
30
40
50
60
70
VID - 0.025
Vcc Maximum
VID - 0.050
VID - 0.075
Vcc [V]
VID - 0.100
Vcc Typical
VID - 0.125
Vcc Minimum
VID - 0.150
VID - 0.175
VID - 0.200
NOTES:
1. The loadline specification includes both static and transient limits except for overshoot allowed as shown in
2. This loadline specification shows the deviation from the VID set point.
3. The loadlines specify voltage limits at the die measured at the VCC_SENSE and VSS_SENSE lands. Voltage regulation
feedback for voltage regulator circuits must be taken from processor V
CC
and V
SS
lands. Refer to the
Voltage Regulator
Down (VRD) 10.1 Design Guide For Desktop LGA775 Socket
for socket loadline guidelines and VR implementation details.
4. Adherence to this loadline specification for the processor is required to ensure reliable processor operation.
28
Datasheet
INTEL [ INTEL CORPORATION ]
