HIN232 thru HIN241
Ordering Information
PART
NUMBER
HIN232CB
HIN232CB-T
HIN232CP
HIN232IB
HIN232IP
HIN236CB
HIN236CP
HIN236IB
HIN237CB
HIN237CB-T
HIN238CB
TEMP.
RANGE (
o
C)
0 to 70
0 to 70
0 to 70
-40 to 85
-40 to 85
0 to 70
0 to 70
-40 to 85
0 to 70
0 to 70
0 to 70
PACKAGE
16 Ld SOIC
Tape and Reel
16 Ld PDIP
16 Ld SOIC
16 Ld PDIP
24 Ld SOIC
24 Ld PDIP
24 Ld SOIC
24 Ld SOIC
Tape and Reel
24 Ld SOIC
M24.3
E16.3
M16.3
E16.3
M24.3
E24.3
M24.3
M24.3
PKG. NO.
M16.3
Ordering Information
PART
NUMBER
HIN238CB-T
HIN238CP
HIN238IB
HIN239CB
HIN239CB-T
HIN239CP
HIN239IB
HIN240CN
HIN241CA
HIN241CB
HIN241IB
TEMP.
RANGE (
o
C)
0 to 70
0 to 70
-40 to 85
0 to 70
0 to 70
0 to 70
-40 to 85
0 to 70
0 to 70
0 to 70
-40 to 85
(Continued)
PACKAGE
Tape and Reel
24 Ld PDIP
24 Ld SOIC
24 Ld SOIC
Tape and Reel
24 Ld PDIP
24 Ld SOIC
44 Ld MQFP
28 Ld SSOP
28 Ld SOIC
28 Ld SOIC
PKG. NO.
E24.3
M24.3
M24.3
E24.3
M24.3
Q44.10X10
M28.209
M28.3
M28.3
Pin Descriptions
PIN
V
CC
V+
V-
GND
C1+
C1-
C2+
C2-
T
IN
T
OUT
R
IN
R
OUT
EN
SHUTDOWN
NC
Power Supply Input 5V
±10%.
Internally generated positive supply (+10V nominal), HIN239 requires +7.5V to +13.2V.
Internally generated negative supply (-10V nominal).
Ground lead. Connect to 0V.
External capacitor (+ terminal) is connected to this lead.
External capacitor (- terminal) is connected to this lead.
External capacitor (+ terminal) is connected to this lead.
External capacitor (- terminal) is connected to this lead.
Transmitter Inputs. These leads accept TTL/CMOS levels. An internal 400kΩ pull-up resistor to
V
CC
is connected to each lead.
Transmitter Outputs. These are RS-232 levels (nominally
±10V).
Receiver Inputs. These inputs accept RS-232 input levels. An internal 5kΩ pull-down resistor to GND is connected to each input.
Receiver Outputs. These are TTL/CMOS levels.
Enable input. This is an active low input which enables the receiver outputs. With EN = 5V, the outputs are placed in a high
impedance state.
Shutdown Input. With SHUTDOWN = 5V, the charge pump is disabled, the receiver outputs are in a high impedance state
and the transmitters are shut off.
No Connect. No connections are made to these leads.
FUNCTION
2
INTERSIL [ INTERSIL CORPORATION ]
