Standard
Model
Item
Sensing distance
Setting distance
Differential distance
Standard sensing object
(mild steel)
Response frequency
Control out-
put
Switching
capacity
Residual
voltage
E2EQ-X3D1
E2EQ-X3D1-M1GJ
3 mm ±10%
0 to 2.4 mm
10% max.
12 x 12 x 1 mm
1 kHz
3 to 100 mA
3.0 V max. (under load current of 100 mA with cable length of 2 m)
NO
Surge absorber, short-circuit protection
Operating/Storage: -25°C to 70°C (with no icing or condensation)
±10% max. of sensing distance at 23°C within temperature range of -25°C and 70°C
±2.5% max. of Sensing distance within rated voltage range ±15%.
Destruction: 1,000 m/s
2
for 10 times each in X, Y, and Z directions
E2EQ-X#D1: Pre-wired models (Standard length: 2 m)
E2EQ-X#D1-M1GJ type: Connector relay models (Standard length: 300 mm)
Approx. 120 g
Approx. 80 g
Approx. 160 g
Approx. 110 g
Approx. 220 g
Approx. 190 g
18 x 18 x 1 mm
500 Hz
30 x 30 x 1 mm
400 Hz
E2EQ-X7D1
E2EQ-X7D1-M1GJ
7 mm ±10%
0 to 5.6 mm
E2EQ-X10D1
E2EQ-X10D1-M1GJ
10 mm ±10%
0 to 8 mm
Operating status (with
sensing object approaching)
Protective circuits
Ambient temperature
Temperature influence
Voltage influence
Shock resistance
Connection method
Weight
(Packed
state)
Pre-wired
Junction
connector
* The response frequencies for DC switching are average values measured on condition that the distance between each sensing object is twice as large as the size
of the sensing object and the sensing distance set is half of the maximum sensing distance.
General
Model
E2EQ-X4X1
E2EQ-X4X1-M1J
E2EQ-X3D1
E2EQ-X3D1-M1GJ
E2EQ-X8X1
E2EQ-X8X1-M1J
E2EQ-X7D1
E2EQ-X7D1-M1GJ
E2EQ-X15X1
E2EQ-X15X1-M1J
E2EQ-X10D1
E2EQ-X10D1-M1GJ
Item
Sensing object
Rated supply voltage (operat-
ing voltage)
Leakage current
Indicator lamp
Ambient humidity
Insulation resistance
Dielectric strength
Vibration resistance
Protective structure
Material
Accessories
Case
Sensing surface
Ferrous metal (Sensitivity lowers with non-ferrous metals)
12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
0.8 mA max.
Operation indicator (red), operation setting indicator (green)
Operating/Storage: 35% to 95%RH (with no condensation)
50 MW min. (at 500 VDC) between energized parts and case
1,000 VAC for 1 min between energized parts and case
10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions
IEC60529 IP67
Teflon resin coating (base: brass) *
Teflon resin *
Instruction manual
* Teflon is a registered trademark of Dupont Company and Mitsui Dupont Chemical Company for their fluoride resin.
E-34
Proximity Sensors
OMRON [ OMRON ELECTRONICS LLC ]
