M50FLW080A
M50FLW080B
8 Mbit (13 x 64KByte Blocks + 3 x 16 x 4KByte Sectors)
3V Supply Firmware Hub / Low Pin Count Flash Memory
FEATURES SUMMARY
■
■
■
■
■
■
■
FLASH MEMORY
– Compatible with either the LPC interface
or the FWH interface (Intel Spec rev1.1)
used in PC BIOS applications
– 5 Signal Communication Interface
supporting Read and Write Operations
– 5 Additional General Purpose Inputs for
platform design flexibility
– Synchronized with 33MHz PCI clock
16 BLOCKS OF 64 KBYTES
– 13 blocks of 64 KBytes each
– 3 blocks, subdivided into 16 uniform
sectors of 4 KBytes each
Two blocks at the top and one at the
bottom (M50FLW080A)
One block at the top and two at the bottom
(M50FLW080B)
ENHANCED SECURITY
– Hardware Write Protect Pins for Block
Protection
– Register-based Read and Write
Protection
– Individual Lock Register for Each 4 KByte
Sector
SUPPLY VOLTAGE
– V
CC
= 3.0 to 3.6V for Program, Erase and
Read Operations
– V
PP
= 12V for Fast Program and Erase
TWO INTERFACES
– Auto Detection of Firmware Hub (FWH) or
Low Pin Count (LPC) Memory Cycles for
Embedded Operation with PC Chipsets
– Address/Address Multiplexed (A/A Mux)
Interface for programming equipment
compatibility.
PROGRAMMING TIME: 10µs typical
PROGRAM/ERASE CONTROLLER
– Embedded Program and Erase algorithms
– Status Register Bits
Figure 1. Packages
PLCC32 (K)
TSOP32 (NB)
8 x 14mm
TSOP40 (N)
10 x 20mm
■
■
PROGRAM/ERASE SUSPEND
– Read other Blocks/Sectors during
Program Suspend
– Program other Blocks/Sectors during
Erase Suspend
ELECTRONIC SIGNATURE
– Manufacturer Code: 20h
– Device Code (M50FLW080A): 80h
– Device Code (M50FLW080B): 81h
June 2005
1/53