TVP5160
www.ti.com
SLES135E–FEBRUARY 2005–REVISED APRIL 2011
NTSC/PAL/SECAM/Component 2x10-Bit Digital Video Decoder
Check for Samples: TVP5160
1
Introduction
1.1 Features
1
• Two 11-Bit 60-MSPS Analog-to-Digital (A/D)
Converters With Analog Preprocessors
(Clamp/AGC)
• Fast Switch 4x Oversampled Input for Digital
RGB Overlay Switching Between Any CVBS,
S-Video, or Component Video Input
• Fixed RGB-to-YUV Color Space Conversion
• Robust Sync Detection for Weak and Noisy
• SCART 4x Oversampled Fast Switching
Between Component RGB Input and CBVS
Input
Signals as Well as VCR
• Analog Video Output
• Chrominance Processor
• Luminance Processor
• Supports NTSC (J, M, 4.43), PAL (B, D, G, H, I,
M, N, Nc, 60) and SECAM (B, D, G, K, K1, L)
CVBS, S-Video
• Supports Component Standards 480i, 576i,
• Clock/Timing Processor and Power-Down
480p, and 576p
Control
• Supports ITU-R BT.601 Pixel Sampling
• Output Formatter Supports Both ITU-R BT.656
(Embedded Syncs) and ITU-R BT.601 (4:2:2
With Discrete Syncs)
Frequencies
• Supports 3D Y/C Separation, or 2D 5-Line (5H)
Adaptive Comb and Chroma Trap Filter for
Both PAL and NTSC Signals
• Concurrent Temporal, Frame Recursive, Noise
Reduction (3DNR)
• IF Compensation
• I2C Host Port Interface
• VBI Data Processor
• "Blue" Screen (Programmable Color) Output
• Macrovision™ Copy Protection Detection
Circuit (Types 1, 2, and 3) on Both Interlaced
and Progressive Signals
• Line-Based Time Base Correction (TBC)
1.2 Applications
•
•
•
•
•
•
•
Digital TV
LCD TV/Monitors
DVD-R
PVR
PC Video Cards
Video Capture/Video Editing
Video Conferencing
1.3 Description
The TVP5160 device is a high quality, digital video decoder that digitizes and decodes all popular
baseband analog video formats into digital component video. The TVP5160 decoder supports the A/D
conversion of component YPbPr and RGB (SCART) signals, as well as the A/D conversion and decoding
of NTSC, PAL, and SECAM composite and S-Video into component YCbCr. Additionally, component
progressive signals can be digitized. The chip includes two 11-bit, 60-MSPS, A/D converters (ADCs). Prior
to each ADC, each analog channel contains an analog circuit, which clamps the input to a reference
voltage and applies a programmable gain and offset. A total of 12 video input terminals can be configured
to a combination of YPbPr, RGB, CVBS, and S-Video video inputs.
Progressive component signals are sampled at 2× clock frequency (54 MHz) and are then decimated to
the 1× rate. In SCART mode the component inputs and the CVBS inputs are sampled at 54 MHz
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005–2011, Texas Instruments Incorporated
TI [ TEXAS INSTRUMENTS ]
