欢迎访问ic37.com |
会员登录 免费注册
发布采购
所在地: 型号: 精确
  • 批量询价
  •  
  • 供应商
  • 型号
  • 数量
  • 厂商
  • 封装
  • 批号
  • 交易说明
  • 询价
  •  
  • 北京元坤伟业科技有限公司

         该会员已使用本站17年以上

  • DF7-5P-3.96DS(26)
  • 数量-
  • 厂家-
  • 封装-
  • 批号-
  • -
  • QQ:857273081QQ:857273081 复制
    QQ:1594462451QQ:1594462451 复制
  • 010-62104931、62106431、62104891、62104791 QQ:857273081QQ:1594462451
更多
  • DF7-5P-3.96DS(26)图
  • 北京中其伟业科技有限公司

     该会员已使用本站16年以上
  • DF7-5P-3.96DS(26)
  • 数量10000 
  • 厂家HIROSE 
  • 封装 
  • 批号16+ 
  • 特价,原装正品,绝对公司现货库存,原装特价!
  • QQ:2880824479QQ:2880824479 复制
  • 010-62104891 QQ:2880824479
  • DF7-5P-3.96DS(26)图
  • 深圳市一线半导体有限公司

     该会员已使用本站16年以上
  • DF7-5P-3.96DS(26)
  • 数量25000 
  • 厂家原厂品牌 
  • 封装原厂外观 
  • 批号 
  • 全新原装部分现货其他订货
  • QQ:2881493920QQ:2881493920 复制
    QQ:2881493921QQ:2881493921 复制
  • 0755-88608801多线 QQ:2881493920QQ:2881493921

产品型号DF7-5P-3.96DS(26)的Datasheet PDF文件预览

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL,C-UL and TÜV Listed)  
DF7 Series  
Complete  
Locking  
Function  
Completely  
enclosed  
locking system  
Full barrier  
between adjacent  
contacts.  
Prevention of  
Incorrect Connections  
Features  
1. Complete Locking Function  
Reliable interior lock protects mated connectors from  
accidental disconnection.  
2. Increased Contact Retention of Crimped  
Contacts and Prevention of Incomplete  
Insertion  
Separate contact retainer increases the contact  
retention, assures and visually confirms the complete  
contact insertion.  
3. Molded-in Contact Retention Tabs  
Handling of terminated contacts during the assembly and  
termination is easier and avoids entangling of wires,  
since there are no protruding metal tabs.  
4. Incorrect Insertion Prevention  
Guide post  
Connectors are polarized to assure correct mating with  
corresponding parts.  
Board Eyelet mounting  
5.Solder Crack Prevention  
Glass reinforced resin is used in the pin header bodies to  
prevent solder cracks caused by the heat shrinkage.  
6. Prevention of Incorrect Board Placement  
Built-in locating posts assure correct connector  
placement and orientation on the board.(2-12 pos.)  
7. Supports Sealing after Installation.  
Sealing compound can be applied to the board installed  
connector for distance of 6 mm max. from the mounting  
surface (9 mm max. for single position).  
8.Cost Effective Tooling  
The same crimping tools are used to terminate socket  
and pin contacts.  
One pos. type can also be mounted  
to boards that have eyelets.  
9. Prevention of Short Circuits between  
Adjacent Contacts  
Each contact is completely surrounded by the insulator  
housing, electrically isolating it from adjacent contacts.  
Continued.  
B95  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
10. 10 A maximum Current  
12. Supports Eyelets  
Connector can carry current of 10 A per contact with  
#16 AWG conductor.Refer to page 3 for current  
ratings for multi-position connectors using other  
conductor sizes.  
1 pos. can be mounted to boards which have eyelets  
attached.  
Applications  
11. Color Variations  
Office equipment, power supplies for industrial, medical  
and instrumentation applications, variety of consumer  
electronic and electrical applications.  
1 pos. is available in a standard 3 colors: natural,  
blue, and red.  
Crimp Sockets  
Single row  
Double rows  
Retainer  
(optional, order separately)  
Shown with terminated  
and installed contacts.  
Refer to page 8 for details.  
Shown with terminated  
and installed contacts.  
Refer to page 11 for details.  
Header  
In-line plug  
Refer to page 10 for details.  
Single row, straight type  
Double rows, straight type  
Panel lock type  
Shown with  
terminated and installed contacts.  
Refer to page 6 for details.  
Refer to page 4 for details. Refer to page 10 for details.  
Single row, right angle type Double row, right angle type  
Shown with  
terminated and installed contacts.  
Refer to page 7 for details.  
Refer to page 5 for details. Refer to page 10 for details.  
Ordering information  
Socket, Header  
Series name: DF7, DF7A  
Applicable Conductor  
1
2
3
6
7
Number of contacts: 1 to 12  
Connector type  
1618: AWG 16 to AWG 18  
2022: AWG 20 to AWG 22  
2426: AWG 24 to AWG 26  
Packaging  
DF7 -  
S - 3.96 C  
*
2
S: Socket  
1
3
4
5
DS: Double-row socket  
P: Header  
SCF: Socket contacts / Reel  
SC: Socket contacts / Bag  
PCF: Plug contacts / Reel  
PC: Plug contacts / Bag  
DP: Double-row Header  
EP: In-line plug  
Contacts  
RS/P: Retainer  
DF7 -  
SCF  
**  
6
Contact pitch: 3.96mm(7.92 mm)  
Type of housing: header  
C: Crimp housing  
4
5
1
7
DSA: Straight header  
DS: Right-angle header  
Blank: Retainer  
B96  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
Product Specifications  
Row  
No. of contacts  
AWG16  
10A  
10A  
9A  
AWG18  
7A  
AWG20  
5A  
AWG22  
4A  
1
1~10  
Operating temperature range -35ç to 85ç (Note 1)  
Operating humidity range  
4
6
9A  
7A  
6A  
20% to 80%  
Current  
rating  
8A  
6A  
5A  
2
8
9A  
8A  
6A  
5A  
Storage temperature range -10çto 60ç (Note 2)  
Storage humidity range 40% to 70% (Note 2)  
Ratings  
10  
12  
8A  
7A  
5A  
4A  
8A  
7A  
5A  
4A  
AC 630V  
AC 600V  
UL/C-UL/TÜV File No.and Recognition No  
Specificatoin  
UL/C-UL  
UL  
:E52653  
Voltage  
rating  
AC 600V(7.92mm pitch)  
AC 300V (3.96mm pitch)  
C-UL  
TÜV  
:E52653  
TÜV  
:R9750437  
Item  
Specification  
Condition  
11. Contact resistance Contact resistance(Initial value)  
12. Insulator resistance 1000 M ohms min.  
10 m ohms max. 20mV max., 1mA  
500 V DC  
13. Withstanding voltage No flashover or Insulator breakdown  
1500 V AC for 1 minute  
14. Insertion-Extraction force  
0.3N min., 4.5N max.  
(per contact)  
Measured with a steel pin of 0.64 x 1.2 0.002 mm  
Contact resistance of 20 m ohms max.  
15. Durability  
30 cycles  
(mating/unmating)  
Frequency 10 to 55 Hz, single amplitude of 0.75 mm, 3 axis, 2  
hours  
16. Vibration  
No momentary disconnections of 1 µs min.  
2
Acceleration of 490 m/s , 11 ms duration, sine half-wave  
17. Shock  
No electrical discontinuity of 1 µs. min.  
Contact resistance 20 m ohms max.  
waveform, 3 cycles in each of the 3 axis.  
18. Humidity  
Temperature 40ç 2ç, 90% to 95% RH, 96 hours  
(-55ç: 30 minutes 5 to 35ç: 5 minutes 85ç: 30 minutes 5  
to 35ç: 5 minutes) for 5 cycles  
19. Temperature cycle Contact resistance of 20 m ohms max.  
10. Resistance to  
soldering heat  
No deformation of the insulator parts affecting  
performance  
Flow solder temperature 250ç, 10 seconds  
Manual soldering: Soldering iron temperature 300ç, 3 seconds  
Note 1: Includes temperature rise caused by the current flow.  
Note 2: The term “storage” refers to products stored for long period of time prior to mounting and use. Operating Temperature Range  
and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.  
Materials  
Product  
Part  
Material  
Polyamide  
Finish  
Color: White  
Remarks  
Sockets  
Insulator  
UL94V-0  
Polyamide  
Color: Beige (Single row)  
Color: Grey (Double row)  
Tin plating (Note)  
Color: White  
Insulator  
UL94V-0  
Headers  
(Glass reinforced)  
High conductivity copper alloy  
Polyamide  
Contact  
Insulator  
Insulator  
Contacts  
----------------  
UL94V-0  
UL94V-0  
----------------  
In-line plug  
Retainer  
Polyamide  
Color: Black  
Crimp contacts  
High conductivity copper alloy  
Tin plating (Note)  
Note: Hirose Electric's plating incorporates anti-whisking compounds.  
B97  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
Straight header  
Part Number  
CL No.  
Number of contacts  
A
B
DF7- 1P-3.96DSA  
DF7- 2P-3.96DSA  
DF7- 3P-3.96DSA  
DF7- 4P-3.96DSA  
DF7- 5P-3.96DSA  
DF7- 6P-3.96DSA  
DF7- 7P-3.96DSA  
DF7- 8P-3.96DSA  
DF7- 9P-3.96DSA  
DF7-10P-3.96DSA  
DF7- 2P-7.92DSA  
DF7- 3P-7.92DSA  
DF7- 4P-7.92DSA  
DF7- 5P-7.92DSA  
CL680-0133-1  
CL680-0036-5  
CL680-0037-8  
CL680-0038-0  
CL680-0039-3  
CL680-0040-2  
CL680-0041-5  
CL680-0042-8  
CL680-0043-0  
CL680-0044-3  
CL680-0108-4  
CL680-0109-7  
CL680-0110-6  
CL680-0111-9  
1
2
-------------  
10.40  
14.36  
18.32  
22.28  
26.24  
30.20  
34.16  
38.12  
42.08  
14.36  
22.28  
30.20  
38.12  
-------------  
3.96  
3
7.92  
4
11.88  
15.84  
19.80  
23.76  
27.72  
31.68  
35.64  
7.92  
5
6
7
8
9
1 Pos.  
10  
2
3
15.84  
23.76  
31.68  
4
5
Note 1) Bag packaging (100 pieces/bag). Order by number of bags.  
Note 2) The 2 pos. type does not have walls on both sides.  
Note 3) DF7-2P-7.92DSA plug has #2 contact positions of DF7-3P-3.96DSA without contacts inserted and the number of pos. indication is 2.  
(Mating receptacle: DF7#-3S-3-96C)  
DF7-3P-7.92DSA plug has #2 and #4 contact positions of DF7-5P-3.96DSA without contacts inserted and the number of pos. indication is 3.  
(Mating receptacle: DF7#-5S-3-96C)  
DF7-4P-7.92DSA plug has #2, #4 and #6 contact of DF7-7P-3.96DSA without contacts inserted and the number of pos. indication is 4.  
(Mating receptacle: DF7#-7S-3-96C)  
DF7-5P-7.92DSA plug has #2, #4, #6 and #8 contact positions of DF7-9P-3.96DSA without contacts inserted and the number of pos. indication is 5.  
(Mating receptacle: DF7#-9S-3-96C)  
2 to 10 Pos.  
A
1 Pos.  
2 to 10 Pos.  
B
No. of contacts  
indicator (Note3)  
7.8  
P=3.96  
6.44  
1 0  
1
(Note1)  
(Note2)  
9E26  
0.84  
Production Lot No.  
M0.64  
Cavity No.  
A
Cavity No.  
2.49  
Ø1.4  
6 L 0 9  
Production Lot No.  
B PCB mounting pattern (Board thickness: 1.6 0.1)  
Eyelet  
Ø3.9 MAX  
1 Pos.  
Board  
2 to 10 Pos.  
Soldering side  
Ø5 MAX  
Note 5: One pos. type can also be mounted to boards  
that have installed eyelets.  
8
0.1  
+0.1  
_0.3  
5.4  
P=3.96 0.05(7.92 0.05)  
0.1  
+0.15 for eyelet  
Ø1.6 _0.25  
B
2.49 0.05  
+0.1  
_0  
1.4  
mm Without eyelet  
B98  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
Right angle header  
A
P=3.96  
(Note1)  
6L09  
A
10  
Production Lot No.  
Cavity No.  
3.5  
No. of contacts indicator (Note2)  
B
1.1  
1.1  
9.5  
10  
A
Ø1.4  
1.4  
C
Part Number  
CL No.  
Number of contacts  
A
B
C
Quantity per tray  
DF7- 2P-3.96DS(24)  
DF7- 3P-3.96DS(24)  
DF7- 4P-3.96DS(24)  
DF7- 5P-3.96DS(24)  
DF7- 6P-3.96DS(24)  
DF7- 7P-3.96DS(24)  
DF7- 8P-3.96DS(24)  
DF7- 9P-3.96DS(24)  
DF7-10P-3.96DS(24)  
DF7- 2P-7.92DS(24)  
DF7- 3P-7.92DS(24)  
DF7- 4P-7.92DS(24)  
DF7- 5P-7.92DS(24)  
CL680-0081-0-24  
CL680-0082-2-24  
CL680-0083-5-24  
CL680-0084-8-24  
CL680-0085-0-24  
CL680-0086-3-24  
CL680-0087-6-24  
CL680-0088-9-24  
CL680-0089-1-24  
CL680-0124-0-24  
CL680-0125-3-24  
CL680-0126-6-24  
CL680-0127-9-24  
2
3
3.96  
7.92  
10.40  
14.36  
18.32  
22.28  
26.24  
30.20  
34.16  
38.12  
42.08  
14.36  
22.28  
30.20  
38.12  
8.40  
114  
84  
66  
60  
48  
42  
36  
36  
30  
84  
60  
42  
36  
12.36  
16.32  
20.28  
24.24  
28.20  
32.16  
36.12  
40.08  
12.36  
20.28  
28.20  
36.12  
4
11.88  
15.84  
19.80  
23.76  
27.72  
31.68  
35.64  
7.92  
5
6
7
8
9
10  
2
3
15.84  
23.76  
31.68  
4
5
Note 1) Tray packaging. Order by number of quantity in the tray.  
Note 2) DF7-2P-7.92DS plug has #2 contact positions of DF7-3P-3.96DS without contacts inserted and the number of pos. indication is 2.  
(Mating receptacle: DF7#-3S-3-96C)  
DF7-3P-7.92DS plug has #2 and #4 contact positions of DF7-5P-3.96DS without contacts inserted and the number of pos. indication is 3.  
(Mating receptacle: DF7#-5S-3-96C)  
DF7-4P-7.92DS plug has #2, #4 and #6 contact of DF7-7P-3.96DS without contacts inserted and the number of pos. indication is 4.  
(Mating receptacle: DF7#-7S-3-96C)  
DF7-5P-7.92DS plug has #2, #4, #6 and #8 contact positions of DF7-9P-3.96DS without contacts inserted and the number of pos. indication is 5.  
(Mating receptacle: DF7#-9S-3-96C)  
B PCB mounting pattern (Board thickness: 1.6 0.1)  
P=3.96 0.05(7.92 0.05)  
A 0.1  
C 0.05  
B99  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
In-line plug (Panel lock type)  
Part Number  
CL No.  
Number of contacts  
A
B
C
DF7- 1EP-3.96C  
DF7- 2EP-3.96C  
DF7- 3EP-3.96C  
DF7- 4EP-3.96C  
DF7- 5EP-3.96C  
DF7- 6EP-3.96C  
DF7- 7EP-3.96C  
DF7- 8EP-3.96C  
DF7- 9EP-3.96C  
DF7-10EP-3.96C  
CL680-0134-4  
CL680-0018-3  
CL680-0019-6  
CL680-0020-5  
CL680-0021-8  
CL680-0022-0  
CL680-0023-3  
CL680-0024-6  
CL680-0025-9  
CL680-0026-1  
1
2
6.44  
13.96  
17.40  
21.36  
25.32  
29.28  
33.24  
37.20  
41.16  
45.12  
49.08  
-------------  
3.96  
10.40  
14.36  
18.32  
22.28  
26.24  
30.20  
34.16  
38.12  
42.08  
7.92  
3
11.88  
15.84  
19.80  
23.76  
27.72  
31.68  
35.64  
4
5
Shown with terminated  
and installed contacts.  
1 Pos.  
6
7
8
9
10  
Note1: Bag packaging (100 pieces/bag). Order by number of bags.  
Note2: Refer to page 10 for retainer.  
Shown with terminated  
and installed contacts.  
2 to 10 Pos.  
1 Pos.  
2 to 10 Pos.  
3
A
B
3
12.44  
6.44  
P=3.96  
9.5  
No. of contacts  
indicator  
A 1  
Cavity No.  
B
10  
Cavity No.  
No. of contacts indicator  
Contact No.1  
indicator  
A 1  
13.96  
C
B Panel Cutout  
1 Pos.  
2 to 10 Pos.  
(11.32+X)+0.1  
0
6.84+0.1  
0
(C-Y)+0.1  
0
(A+0.4)+0.1  
0
10 0.2  
X
Y
2.0  
1.6  
1.2  
0.8  
1.44  
0.96  
0.48  
0
0.88  
0.96  
1.44  
1.92  
B100  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
In-line Plug  
Shown with terminated  
and installed contacts.  
Shown with terminated  
and installed contacts.  
1 Pos.  
2 to 10 Pos.  
1 Pos.  
2 to 10 Pos.  
6.44  
A
B
P=3.96  
(Note2)  
9.5  
No. of contacts  
indicator  
A
1
Cavity No.  
10  
B
Cavity No.  
No. of contacts indicator  
Contact No.1  
indicator  
A
1
Part Number  
CL No.  
Number of contacts  
A
B
DF7A- 1EP-3.96C  
DF7A- 2EP-3.96C  
DF7A- 3EP-3.96C  
DF7A- 4EP-3.96C  
DF7A- 5EP-3.96C  
DF7A- 6EP-3.96C  
DF7A- 7EP-3.96C  
DF7A- 8EP-3.96C  
DF7A- 9EP-3.96C  
DF7A-10EP-3.96C  
CL680-0135-7  
CL680-0072-9  
CL680-0073-1  
CL680-0074-4  
CL680-0075-7  
CL680-0076-0  
CL680-0077-2  
CL680-0078-5  
CL680-0079-8  
CL680-0080-7  
1
2
6.44  
10.40  
14.36  
18.32  
22.28  
26.24  
30.20  
34.16  
38.12  
42.08  
-------------  
3.96  
3
7.92  
4
11.88  
15.84  
19.80  
23.76  
27.72  
31.68  
35.64  
5
6
7
8
9
10  
Note1: Bag packaging (100 pieces/bag). Order by number of bags.  
Note2: Refer to page 10 for retainer.  
B101  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
Crimp Sockets  
Shown with terminated  
and installed contacts.  
Shown with terminated  
and installed contacts.  
1 Pos.  
2 to 10 Pos.  
1 Pos.  
2 to 10 Pos.  
A
B
5.5  
P=3.96  
1
Contact No.1 indicator  
(Note 3)  
Cavity No.  
No. of contacts indicator  
Cavity No.  
A
1
1
2
3
4
5
6
7
8
9
10  
B
No. of contacts indicator  
Part Number  
CL No.  
Number of contacts  
A
B
DF7- 1S-3.96C  
DF7- 2S-3.96C  
DF7- 3S-3.96C  
DF7- 4S-3.96C  
DF7- 5S-3.96C  
DF7- 6S-3.96C  
DF7- 7S-3.96C  
DF7- 8S-3.96C  
DF7- 9S-3.96C  
DF7-10S-3.96C  
CL680-0132-9  
CL680-0009-2  
CL680-0010-1  
CL680-0011-4  
CL680-0012-7  
CL680-0013-0  
CL680-0014-2  
CL680-0015-5  
CL680-0016-8  
CL680-0017-0  
1
2
5.50  
-------------  
3.96  
10.00  
13.96  
17.92  
21.88  
25.84  
29.80  
33.76  
37.72  
41.68  
3
7.92  
4
11.88  
15.84  
19.80  
23.76  
27.72  
31.68  
35.64  
5
6
7
8
9
10  
Note1: Bag packaging (100 pieces/bag). Order by number of bags.  
Note2: Refer to page 10 for retainer.  
B102  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
Retainer  
1 Pos.  
2 to 10 Pos.  
1 Pos.  
2 to 10 Pos.  
A
B
3
P=3.96  
6.6  
2.2  
2.2  
1
B
Cavity No.  
B
10  
No. of contacts indicator  
Cavity No.  
No. of contacts indicator  
Part Number  
CL No.  
Number of contacts  
A
B
DF7- 1RS/P-3.96  
DF7- 2RS/P-3.96  
DF7- 3RS/P-3.96  
DF7- 4RS/P-3.96  
DF7- 5RS/P-3.96  
DF7- 6RS/P-3.96  
DF7- 7RS/P-3.96  
DF7- 8RS/P-3.96  
DF7- 9RS/P-3.96  
DF7-10RS/P-3.96  
CL680-0136-0  
CL680-0027-4  
CL680-0028-7  
CL680-0029-0  
CL680-0030-9  
CL680-0031-1  
CL680-0032-4  
CL680-0033-7  
CL680-0034-0  
CL680-0035-2  
1
2
-------------  
10.00  
13.96  
17.92  
21.88  
25.84  
29.80  
33.76  
37.72  
41.68  
-------------  
3.96  
3
7.92  
4
11.88  
15.84  
19.80  
23.76  
27.72  
31.68  
35.64  
5
6
7
8
9
10  
Note1: Bag packaging (100 pieces/bag). Order by number of bags.  
Note2: Retainer is common to sockets, in-line plug.  
B103  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
A
B
Double-row Straight Header  
No. of  
contacts  
Cavity No.  
P=3.96  
indicator  
10  
A
1.26  
Contact No.1  
indicator  
M0.64  
Part Number  
CL No.  
Number of contacts  
A
B
Quantity per tray  
132  
96  
B
PCB mounting pattern  
(Board thickness: 1.6 0.1)  
DF7- 4DP-3.96DSA(24) CL680-0145-0-24  
DF7- 6DP-3.96DSA(24) CL680-0146-3-24  
DF7- 8DP-3.96DSA(24) CL680-0147-6-24  
DF7-10DP-3.96DSA(24) CL680-0148-9-24  
DF7-12DP-3.96DSA(24) CL680-0149-1-24  
4
6
10.40  
14.36  
3.96  
7.92  
2.22  
B
0.1  
1.4  
P=3.96 0.05  
8
18.32 11.88  
22.28 15.84  
26.24 19.80  
72  
10  
12  
60  
54  
Note: Tray packaging. Order by number of trays quantity.  
Contact No.1  
2.22 0.05  
A
B
C
Double-row Right angle Header  
P=3.96  
2.2  
Contact No.1 indicator  
3.5  
No. of  
contacts  
indicator  
Cavity No.  
A
A
Part Number  
CL No.  
Number of contacts  
A
B
C
Quantity per tray  
B
PCB mounting pattern  
DF7- 4DP-3.96DS(24) CL680-0150-0-24  
DF7- 6DP-3.96DS(24) CL680-0151-3-24  
DF7- 8DP-3.96DS(24) CL680-0152-6-24  
DF7-10DP-3.96DS(24) CL680-0153-9-24  
DF7-12DP-3.96DS(24) CL680-0154-1-24  
4
6
10.40 8.40 3.96  
14.36 12.36 7.92  
18.32 16.32 11.88  
22.28 20.28 15.84  
26.24 24.24 19.80  
88  
64  
48  
40  
36  
(Board thickness: 1.6 0.1)  
B
C
0.1  
0.1  
8
3.96 0.05  
10  
12  
Note: Tray packaging. Order by number of trays quantity.  
Contact No.1  
B104  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
Double-row Socket  
A
B
P=3.96  
(16)  
(17.2)  
Contact No.1  
Enhanced ergonomic lock  
Standard Lock  
9
1
2
A
10  
No. of contacts indicator  
Cavity No.  
Standard lock  
Part Number  
Enhanced ergonomic lock  
CL No.  
Number of contacts  
A
B
Part Number  
CL No.  
Number of contacts  
A
B
DF7-4DS-3.96C  
DF7-6DS-3.96C  
DF7-8DS-3.96C  
DF7-10DS-3.96C  
DF7-12DS-3.96C  
4
6
10.00  
13.96  
17.92  
21.88  
25.84  
3.96  
DF7A-4DS-3.96C  
DF7A-6DS-3.96C  
DF7A-8DS-3.96C  
DF7A-10DS-3.96C  
DF7A-12DS-3.96C  
CL680-0160-4  
CL680-0161-7  
CL680-0162-0  
CL680-0163-2  
CL680-0164-5  
4
6
10.00  
13.96  
17.92  
21.88  
25.84  
3.96  
Reserved For  
product  
7.92  
7.92  
8
11.88  
15.84  
19.80  
8
11.88  
15.84  
19.80  
expansion  
10  
12  
10  
12  
Note: Bag packaging (100 pieces/bag). Order by number of bags.  
B105  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
Crimp Contact  
Female Contact  
Male Contact  
2.4  
2.35  
2.5  
1.3  
0.64  
AWG No.  
16  
18  
AWG No.  
16  
18  
0.8  
P=11  
t=0.25  
P=11  
t=0.25  
Part Number  
CL No.  
Packaging  
Quantity  
Finish  
CL680-0001-0  
CL680-0002-3  
CL680-0003-6  
CL680-0004-9  
CL680-0005-1  
CL680-0006-4  
CL680-0007-7  
CL680-0008-0  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
Reel  
Bag  
3,000  
100  
3,000  
100  
3,000  
100  
3,000  
100  
DF7-1618SCF  
DF7-1618SC  
DF7-2022SCF  
DF7-2022SC  
DF7-1618PCF  
DF7-1618PC  
DF7-2022PCF  
DF7-2022PC  
Tin plating  
Applicable cable (Tin plated annealed copper wire)  
Jacket diameter  
Wire size(Stranded wire conductor)  
UL style  
AWG#16(26/0.254mm)  
AWG#18(34/0.18mm)  
AWG#20(21/0.18mm)  
AWG#22(17/0.16mm)  
AWG#16(26/0.254mm)  
AWG#18(34/0.18mm)  
AWG#20(21/0.18mm)  
AWG#22(17/0.16mm)  
2.1 to 2.5mm  
UL1007  
1.6 to 1.9mm  
2.9 to 3.2mm  
2.4 to 2.7mm  
UL1015  
Note 1: Applicable wire with tin plated solid soft conductor.  
Note 2: When using other than the recommended wire, contact your nearest Hirose representative.  
Note 3: Strip length: 3.0 to 3.8mm.  
Tools  
Type  
Press unit  
Part Number  
CL No.  
Applicable Contacts  
CM-105  
CL901-0005-4  
CL901-4554-4  
CL901-4553-1  
CL550-0268-0  
CL550-0269-3  
----------------  
Automatic  
Manual  
AP105-DF7-1618  
AP105-DF7-2022  
HT104/DF7-1618  
HT104/DF7-2022  
DF7-1618SCF/DF7-1618PCF  
DF7-2022SCF/DF7-2022PCF  
DF7-1618SC/DF7-1618PC  
DF7-2022SC/DF7-2022PC  
Applicator  
Crimp tools  
B106  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
B Mating Dimensions  
Socket to Straight Header Connection  
DF7-*S-3.96C  
1 pos. 2 to 12 pos.  
A
B
C
18.5  
09.0  
20.3  
20.0  
08.5  
21.5  
DF7_*S_3.96C  
DF7_*RS/P_3.96  
DF7_*P_3.96DSA  
Socket to Straight Header Connection (Double-row)  
(17.7)  
(16.5)  
DF7_*DS_3.96C  
DF7A_*DS_3.96C  
DF7_*DP_3.96DSA(24)  
DF7_*DS_3.96DSA(24)  
Socket to Right angle Header Connection  
DF7_*S_3.96C  
26.6  
25.1  
DF7_*P_3.96DS  
DF7_*RS/P_3.96  
Socket to Right angle Header Connection (Double-row)  
DF7A_*DS_3.96C  
(28.1)  
DF7_*DS_3.96C  
(28.1)  
DF7_*DP_3.96DS(24)  
DF7_*DP_3.96DS(24)  
B107  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
Socket to In-line Plug (Panel mount type) Connection  
D
E
DF7_*S_3.96C  
DF7_*EP_3.96C  
1 pos.  
35.1  
2 to 12 pos.  
37.0  
D
E
DF7_*RS/P_3.96  
32.1  
34.0  
ꢀꢀ Socket to In-line Plug Connection  
F
DF7A_*EP_3.96C  
G
DF7_*S_3.96C  
1 pos.  
2 to 12 pos.  
37.0  
F
35.1  
32.1  
DF7_*RS/P_3.96  
G
34.0  
B108  
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.  
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.  
B Contact Extraction Procedure  
Contact extraction tool: Flat-bladed screwdriver, 1.4 mm blade width  
Use with crimp Contacts: DF7-1618SC(F), DF7-2022SC(F),  
DF7-1618PC(F), DF7-2022PC(F)  
Work Method  
Housing Cross-Section  
1. Refer to the drawing No. 1. Insert  
Flat-bladed screwdriver  
correct size screwdriver in the  
insulator against the molded-in  
lance. Deflect the lance as shown.  
Molded-in lance  
Pull-out direction  
2. Assure that the lance is deflected  
to release the contact and pull- out  
wire with the terminated contact.  
B General Use Precautions  
Make sure that the lock is fully depressed before un-mating the connectors.  
Use correct size of the wires. Do NOT forcefully twist or deform wires, as this may affect the crimped  
contact connection.  
When the potting process is to be performed, please take into consideration the surface tension of  
the resin when filling.  
B109  
配单直通车
DF7-5P-3.96DS(26)产品参数
型号:DF7-5P-3.96DS(26)
是否无铅:不含铅
是否Rohs认证:符合
生命周期:Obsolete
IHS 制造商:HIROSE ELECTRIC CO LTD
Reach Compliance Code:unknown
风险等级:5.83
Is Samacsys:N
板上安装选件:PEG
主体宽度:0.413 inch
主体深度:0.709 inch
主体长度:0.964 inch
连接器类型:BOARD CONNECTOR
触点排列:S0P5
联系完成终止:TIN
触点性别:MALE
触点材料:COPPER ALLOY
触点电阻:10 m Ω
触点样式:SQ PIN-SKT
介电耐压:1500VAC V
耐用性:30 Cycles
最大插入力:4.448 N
绝缘电阻:1000000000 Ω
绝缘体颜色:BEIGE
绝缘体材料:GLASS FILLED POLYAMIDE
制造商序列号:DF7
混合触点:YES
安装选项1:LOCKING
安装方式:RIGHT ANGLE
安装类型:BOARD
连接器数:ONE
最高工作温度:85 °C
最低工作温度:-35 °C
参考标准:UL,TUV
可靠性:COMMERCIAL
子类别:Headers and Edge Type Connectors
端子长度:0.138 inch
端接类型:SOLDER
触点总数:5
撤离力-最小值:.29746 N
Base Number Matches:1
  •  
  • 供货商
  • 型号 *
  • 数量*
  • 厂商
  • 封装
  • 批号
  • 交易说明
  • 询价
批量询价选中的记录已选中0条,每次最多15条。
 复制成功!