欢迎访问ic37.com |
会员登录 免费注册
发布采购
所在地: 型号: 精确
  • 批量询价
  •  
  • 供应商
  • 型号
  • 数量
  • 厂商
  • 封装
  • 批号
  • 交易说明
  • 询价
  •  
  • 北京元坤伟业科技有限公司

         该会员已使用本站17年以上

  • SKY85340-11
  • 数量-
  • 厂家-
  • 封装-
  • 批号-
  • -
  • QQ:857273081QQ:857273081 复制
    QQ:1594462451QQ:1594462451 复制
  • 010-62104931、62106431、62104891、62104791 QQ:857273081QQ:1594462451
更多
  • SKY85340-11图
  • 深圳市得捷芯城科技有限公司

     该会员已使用本站11年以上
  • SKY85340-11
  • 数量169 
  • 厂家SKY 
  • 封装NA/ 
  • 批号23+ 
  • 优势代理渠道,原装正品,可全系列订货开增值税票
  • QQ:3007977934QQ:3007977934 复制
    QQ:3007947087QQ:3007947087 复制
  • 0755-82546830 QQ:3007977934QQ:3007947087
  • SKY85340-11图
  • 昂富(深圳)电子科技有限公司

     该会员已使用本站4年以上
  • SKY85340-11
  • 数量32222 
  • 厂家SKYWORKS/思佳讯 
  • 封装DFN 
  • 批号23+ 
  • 一站式BOM配单,短缺料找现货,怕受骗,就找昂富电子.
  • QQ:GTY82dX7
  • 0755-23611557【陈妙华 QQ:GTY82dX7
  • SKY85340-11图
  • 深圳市毅创腾电子科技有限公司

     该会员已使用本站16年以上
  • SKY85340-11
  • 数量34585 
  • 厂家SKYWORKS 
  • 封装QFN 
  • 批号22+ 
  • ★只做原装★正品现货★原盒原标★
  • QQ:2355507168QQ:2355507168 复制
    QQ:2355507169QQ:2355507169 复制
  • 86-755-83219286 QQ:2355507168QQ:2355507169
  • SKY85340-11图
  • 深圳市珩瑞科技有限公司

     该会员已使用本站2年以上
  • SKY85340-11
  • 数量4500 
  • 厂家SKYWORKS 
  • 封装QFN 
  • 批号21+ 
  • 只做原装正品,支持实单
  • QQ:2938238007QQ:2938238007 复制
    QQ:1840507767QQ:1840507767 复制
  • -0755-82578309 QQ:2938238007QQ:1840507767
  • SKY85340-11图
  • 深圳市想亚微电子有限公司

     该会员已使用本站14年以上
  • SKY85340-11
  • 数量20000 
  • 厂家SKYWORKS思佳讯 
  • 封装QFN16 
  • 批号24+ 
  • 原厂货源/正品保证/专注品牌/诚信经营/至尊服务
  • QQ:1272309311QQ:1272309311 复制
    QQ:756385723QQ:756385723 复制
  • 13714575141 QQ:1272309311QQ:756385723

产品型号SKY85402-11的Datasheet PDF文件预览

DATA SHEET  
SKY85402-11: High-Power (+22 dBm) 802.11ac WLAN Power  
Amplifier with Integrated Power Detector  
Applications  
IEEE 802.11ac WLAN enabled:  
Bias  
PA_EN  
RF_IN  
Access points  
Media gateways  
Set-top boxes  
LCD TVs  
Input  
Match  
Input  
Match  
Inter-Stage  
Match  
Inter-Stage  
Match  
RF_OUT  
Detector  
202120-001  
Other broadband triple-play multimedia applications  
VCC1  
VCC2  
VDET  
VCC3  
Figure 1. SKY85402-11 Block Diagram  
Features  
Description  
Linear output power for IEEE 802.11ac 256-QAM,  
EVM < 1.8% = +22 dBm @ 5.0 V  
Skyworks SKY85402-11 is a 5 GHz Microwave Monolithic  
Integrated Circuit (MMIC) power amplifier (PA) with superior  
High gain: 32 dB  
output power, linearity, and efficiency. These features make the  
SKY85402-11 ideal for wireless local area network (WLAN IEEE  
802.11ac) applications.  
Power shutdown mode  
Superior gain flatness  
Fully matched at RF input/output ports  
Load insensitive power detector  
The device is fabricated using SiGe BiCMOS technology. The  
device is internally matched and mounted in a 20-pin, 4 x 4 mm  
Quad Flat No-Lead (QFN) surface-mount technology (SMT)  
package, which allows for a highly manufacturable low cost  
solution.  
Small footprint QFN (20-pin, 4 x 4 mm) SMT package  
(MSL3, 260 C per JEDEC J-STD-020)  
A block diagram of the SKY85402-11 is shown in Figure 1.The  
device package and pinout are shown in Figure 2. Signal pin  
assignments and functional pin descriptions are described in  
Table 1.  
Skyworks GreenTM products are compliant with  
all applicable legislation and are halogen-free.  
For additional information, refer to Skyworks  
Definition of GreenTM, document number  
SQ04–0074.  
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com  
202120K • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 26, 2017  
1
DATA SHEET • SKY85402-11: HIGH-POWER (+22 dBm) 802.11ac WLAN PA  
20 19 18 17  
16  
N/U  
1
2
3
4
GND  
15  
14  
13  
12  
11  
GND  
RF_IN  
GND  
GND  
RF_OUT  
GND  
5
PA_EN  
GND  
6
7
8
9
10  
202120-002  
Figure 2. SKY85402-11 Pinout  
(Top View)  
Table 1. SKY85402-11 Signal Descriptions  
Pin  
1
Name  
Description  
Not used; open circuit  
Pin  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
Name  
Description  
N/U  
GND  
GND  
Ground  
Ground  
2
GND  
RF_IN  
GND  
PA_EN  
N/U  
Ground  
3
RF input  
RF_OUT  
GND  
Power amplifier RF output  
Ground  
4
Ground  
5
PA enable  
GND  
Ground  
6
Not used; open circuit  
Not used; open circuit  
Not used; open circuit  
Third stage supply voltage  
Analog power detector output  
GND  
Ground  
7
N/U  
GND  
Ground  
8
N/U  
VCC3  
VCC2  
VCC1  
Third stage supply voltage  
Second stage supply voltage  
First stage supply voltage  
9
VCC3  
VDET  
10  
Technical Description  
Electrical and Mechanical Specifications  
The SKY85402-11 PA contains all of the needed RF matching and  
DC biasing circuits. The device also provides an output power  
detector voltage.  
The absolute maximum ratings of the SKY85402-11 are provided  
in Table 2. Recommended operating conditions are specified in  
Table 3. Electrical specifications are provided in Tables 4, 5,  
and 6.  
The SKY85402-11 is a three-stage, SiGe BiCMOS device  
optimized for high linearity and power efficiency. These features  
make the device suitable for wideband digital applications, where  
PA linearity and power consumption are of critical importance (for  
example, WiFi systems or WLANs).  
Typical performance characteristics of the SKY85402-11 are  
illustrated in Figures 3 through 9.  
The device has been characterized with the highest specified data  
rates for IEEE802.11ac (256 QAM). Under these stringent test  
conditions, the device exhibits excellent spectral purity and power  
efficiency.  
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com  
June 26, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202120K  
2
DATA SHEET • SKY85402-11: HIGH POWER (+22 dBm) 802.11ac WLAN PA  
Table 2. SKY85402-11 Absolute Maximum Ratings1  
Parameter  
Symbol  
Minimum  
-0.3  
Maximum  
+5.5  
Units  
V
Supply voltage  
Enable voltage  
RF input power  
VCC1, VCC2, VCC3  
PA_EN  
PIN  
-0.3  
+3.6  
V
+12  
dBm  
C  
Operating temperature  
Storage temperature  
TOP  
TST  
-40  
-40  
+85  
+150  
+160  
14.9  
C  
Junction temperature  
TJ  
C  
Thermal resistance  
ΘJC  
C/W  
Electrostatic discharge:  
Human Body Model (HBM), Class 1C  
1000  
V
1
Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters  
set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.  
ESD HANDLING:Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device.  
This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce  
potentials of several kilovolts on the human body or equipment, which can discharge without detection.  
Industry-standard ESD handling precautions should be used at all times.  
Table 3. SKY85402-11 Recommended Operating Conditions  
Parameter  
Symbol  
VCC1, VCC2, VCC3  
PA_EN  
Minimum  
3.0  
Typical  
Maximum  
5.25  
Units  
Supply voltage  
Enable voltage  
5.00  
V
V
1.8  
3.6  
Case operating temperature  
TOP  
-40  
+25  
+85  
C  
Table 4. SKY85402-11 Electrical Specifications: DC Characteristics1  
(VCC1 = VCC2 = VCC3 = 5.0 V, PA_EN = 3.3 V, TOP = +25 C as Measured on the Evaluation Board, Unless Otherwise Noted)  
Parameter  
Supply current  
Symbol  
Test Condition  
Min  
Typical  
Max  
Units  
ICC  
802.11ac:  
POUT = +22 dBm, MCS9, 5 V  
POUT = +25 dBm, MCS7, 5 V  
450  
560  
495  
615  
mA  
mA  
PA_EN = 0 V, No RF  
No RF  
20  
100  
μA  
Quiescent current  
ICQ  
335  
mA  
Enable voltage:  
High  
Low  
PAEN_H  
PAEN_L  
1.8  
0
3.6  
0.5  
V
V
Enable current  
IEN  
150  
200  
μA  
1
Performance is guaranteed only under the conditions listed in this table.  
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com  
202120K • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 26, 2017  
3
DATA SHEET • SKY85402-11: HIGH-POWER (+22 dBm) 802.11ac WLAN PA  
Table 5. SKY85402-11 Electrical Specifications: General1  
(VCC1 = VCC2 = VCC3 = 5.0 V, PA_EN = 3.3 V, TOP = +25 C, Unless Otherwise Noted)  
Parameter  
Frequency range  
Symbol  
Test Condition  
Min  
5.15  
+20.5  
+23  
+26  
+28  
30  
Typical  
Max  
Units  
GHz  
dBm  
dBm  
dBm  
dBm  
dB  
f
5.85  
Output power  
POUT  
802.11ac, MCS9, -35 dB DEVM, HT80, 5 V  
802.11n, MCS7, -30 dB DEVM, HT40, 5 V  
MCS0, 5 V, HT20, mask compliant  
PIN = CW  
+22  
+25  
+27.5  
+29  
32  
1 dB output compression point  
Small signal gain  
OP1dB  
|S21|  
36  
Input return loss  
|S11|  
8
14  
dB  
Gain variation over band  
2nd and 3rd harmonics  
Rise and fall time  
S21  
2fo, 3fo  
tR, tF  
1.5  
dB  
POUT = +23 dBm  
-50  
0.5  
-45  
dBm/MHz  
μs  
Stability  
POUT = +28 dBm,  
VSWR = 6:1, all phases  
All non-harmonically related outputs  
< -50 dBm/MHz  
-
Ruggedness  
Ru  
PIN = +10 dBm,  
VSWR = 6:1, all phases  
-
No damage  
1
Performance is guaranteed only under the conditions listed in this table.  
Table 6. SKY85402-11 Electrical Specifications: Power Detector Characteristics1  
(VCC = 5.0 V, PA_EN = 3.3 V, TOP = +25 C, f = 5.4 GHz, Unless Otherwise Noted)  
Parameter  
Output power detector range  
Detector voltage  
Symbol  
PDR  
Test Condition  
Min  
Typical  
Max  
Units  
0
OP1dB  
dBm  
VDET  
POUT = +28 dBm  
0.85  
0.65  
0.30  
V
V
V
POUT = +25 dBm  
POUT = No RF  
Detector accuracy  
ERRDET  
ΔPOUT @ constant VDET, +25 dBm:  
5.15 GHz to 5.32 GHz. 0.65 V  
5.32 GHz to 5.70 GHz, 0.66 V  
5.70 GHz to 5.85 GHz, 0.88 V  
Detection variation at VSWR = 3:1  
-0.5  
-0.5  
-0.5  
+0.5  
+0.5  
+0.5  
dB  
dB  
dB  
dB  
1.5  
2
Output impedance  
DC load impedance  
PDZOUT  
kΩ  
kΩ  
PDZLOAD  
26.5  
1
Performance is guaranteed only under the conditions listed in this table.  
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com  
June 26, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202120K  
4
DATA SHEET • SKY85402-11: HIGH POWER (+22 dBm) 802.11ac WLAN PA  
Typical Performance Characteristics  
(VCC1 = VCC2 = VCC3 = 5.0 V, TOP = +25 C, Unless Otherwise Noted)  
5.0  
4.5  
4.0  
3.5  
3.0  
2.5  
2.0  
1.5  
1.0  
3.5  
3.0  
2.5  
2.0  
1.5  
5150 MHz  
5180 MHz  
5500 MHz  
1.0  
0.5  
0
5500 MHz  
5805 MHz  
3.0%  
5850 MHz  
802.11n Limit  
802.11ac Limit  
0.5  
0
1.8%  
+7  
+9  
+11  
+13 +15  
+17  
+19  
+21  
+23  
+25  
+27  
+27  
+28  
+7  
+9  
+11  
+13  
+15  
+17  
+19  
+21  
+23  
+25  
+27  
Output Power (dBm)  
Output Power (dBm)  
Figure 4. DEVM vs Output Power  
(802.11ac, MCS9, HT40, 5 V)  
Figure 3. DEVM vs Output Power  
(802.11ac, MCS9, HT80, 5 V)  
3.5  
3.0  
2.5  
2.0  
1.5  
1.0  
3.5  
3.0  
2.5  
2.0  
1.5  
1.0  
5150 MHz  
5150 MHz  
5500 MHz  
5500 MHz  
5850 MHz  
5850 MHz  
802.11n Limit  
802.11ac Limit  
802.11n Limit  
802.11ac Limit  
0.5  
0
0.5  
0
+7  
+9  
+11  
+13  
+15  
+17  
+19  
+21  
+23  
+25  
+7  
+9  
+11  
+13  
+15  
+17  
+19  
+21  
+23  
+25  
+27  
Output Power (dBm)  
Output Power (dBm)  
Figure 5. Gain vs Output Power @ 5 V  
Figure 6. Total Current vs Output Power @ 5 V  
(R8 and R11 with 0 Ω)  
35  
34  
33  
32  
31  
30  
29  
28  
27  
35  
34  
33  
32  
31  
30  
29  
28  
27  
5150 MHz  
5500 MHz  
5850 MHz  
5150 MHz  
5500 MHz  
5850 MHz  
26  
26  
25  
25  
+18  
+20  
+22  
+24  
+26  
+28  
+16  
+18  
+20  
+22  
+24  
+26  
+8  
+10  
+12  
+14  
+16  
+8  
+10  
+12  
+14  
Output Power (dBm)  
Output Power (dBm)  
Figure 7. Detector Voltage vs Output Power  
Figure 8. S-Parameters vs Frequency  
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com  
202120K • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 26, 2017  
5
DATA SHEET • SKY85402-11: HIGH-POWER (+22 dBm) 802.11ac WLAN PA  
0.80  
0.75  
0.70  
0.65  
0.60  
0.55  
0.50  
0.45  
0.40  
5150 MHz  
5500 MHz  
5850 MHz  
0.35  
0.30  
+8  
+10  
+12  
+14  
+16  
+18  
+20  
+22  
+24  
+26  
+28  
Output Power (dBm)  
Figure 9. Harmonics vs Frequency  
(@ +25 dBm)  
Circuit Design Considerations  
Evaluation Board Description  
The SKY85402-11 Evaluation Board is used to test the  
performance of the SKY85402-11 WLAN PA. A schematic diagram  
of the SKY85402-11 Evaluation Board is shown in Figure 10. A  
photograph of the Evaluation Board is shown in Figure 11.  
Component values for the SKY85402-11 Evaluation Board are  
listed in Table 7.  
The following design considerations are general in nature and  
must be followed regardless of final use or configuration:  
Paths to ground should be made as short as possible.  
The ground pad of the SKY85402-11 has special electrical and  
thermal grounding requirements. This pad is the main thermal  
conduit for heat dissipation. Since the circuit board acts as the  
heat sink, it must shunt as much heat as possible from the  
device.  
Evaluation Board Setup Procedure  
1. Connect system ground to pin 2 of connector J6.  
2. Apply 5.0 V to pin 7 of connector J6.  
Therefore, design the connection to the ground pad to dissipate  
the maximum wattage produced by the circuit board. Multiple  
vias to the grounding layer are required. For further information,  
refer to the Skyworks Application Note PCB Design Guidelines  
for High Power Dissipation Packages, document number  
201211.  
3. By applying 3.3 V on PA_EN (pin 6 of the J5 header), the PA is  
enabled. By placing a ground on PA_EN, the PA is disabled and  
placed in a shutdown state, drawing minimal current.  
4. The 5 GHz amplifier performance can be monitored by applying  
an RF signal to connector J2 (RF_IN). Monitor the output power  
on the RF_OUT port connector, J1.  
Bypass capacitors should be used on the DC supply lines. Refer  
to the schematic drawing in Figure 10 for further details.  
5. Detector performance can be monitored on pin 4 of connector  
J5.  
The RF lines should be well separated from each other with  
solid ground in between traces to maximize input-to-output  
isolation.  
CAUTION: Do not overdrive the amplifier by applying too much  
RF on the device input. A suitable starting input power  
setting is -20 dBm.  
The RF_IN and RF_OUT ports are DC short to ground. These  
ports need to be DC blocked with general purpose 10 pF  
capacitors if there is DC present on the traces connecting to the  
ports.  
The RF_IN and RF_OUT trace losses measured from device pin  
to SMA connector are 0.2 dB each.  
NOTE: A poor connection between the ground pad and ground  
increases junction temperature (TJ), which reduces the life  
of the device.  
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com  
June 26, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202120K  
6
DATA SHEET • SKY85402-11: HIGH POWER (+22 dBm) 802.11ac WLAN PA  
J6 Header  
1
2
3
4
5
6
7
R2  
0
Ω
R3  
0 Ω  
R8  
27 Ω  
R11  
13 Ω  
C20  
4.7 uF  
C6  
1 nF  
C9  
1 nF  
VCC Bridge  
C8  
100 nF  
20  
19  
18  
17  
16  
1
15  
14  
13  
12  
11  
N/U  
GND  
2
3
4
GND  
GND  
RF_OUT  
GND  
J2  
J1  
L1  
1.0 nH  
RF Input  
RF_IN  
GND  
RF Output  
C12  
0.4 pF  
5
PA_EN  
GND  
6
7
8
9
10  
×
×
×
R1  
26.7 kΩ  
C7  
100 nF  
C1  
180 pF  
VCC Bridge  
Note: These pins are not used  
for this product application.  
1
2
3
4
5
6
7
Notes:  
1. Components designated as DNI are not shown in this schematic.  
2. The 0 Ω resistors R2 and R3 are not required in the final application.  
J5 Header  
202120-010  
Figure 10. SKY85402-11 Evaluation Board Schematic  
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com  
202120K • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 26, 2017  
7
DATA SHEET • SKY85402-11: HIGH-POWER (+22 dBm) 802.11ac WLAN PA  
202120-011  
Figure 11. SKY85402-11 Evaluation Board  
Table 7. SKY85402-11 Evaluation Board Bill of Materials  
Component  
Size  
Value  
180 pF  
Vendor  
Mfr Part Number  
GRM1555C1H181JA01  
GRM1555C1H102JA01  
GRM155R71C104KA88D  
GJM1555C1HR40BB01  
GRM188R60J475KE19  
142-0701-851  
Comments  
Multilayer ceramic  
C1  
0402  
0402  
0402  
0402  
0603  
Murata  
Murata  
Murata  
Murata  
Murata  
C6, C9  
C7, C8  
C12  
1 nF  
Multilayer ceramic  
Multilayer ceramic  
RF, High Q, Low Loss  
Multilayer ceramic  
100 nF  
0.4 pF  
4.7 uF  
SMA  
C20  
J1, J2  
End launch  
Johnson Components  
SMA end launch straight jack  
receptacle - tab contact  
J5, J6  
100 mil  
0402  
7X1  
Samtec  
TSW-107-07-G-S  
LQG15HN1N0S02  
Z434-B  
100 mil header  
L1  
1.0 nH  
Z434-B  
26.7 kΩ  
0 Ω  
Murata  
High frequency multilayer  
PCB  
PCB1  
Skyworks Solutions Inc.  
Panasonic  
R1  
0402  
ERJ2RKF2672  
ERJ2GEJ0R0  
ERJ2GEJ270  
ERJ2GEJ13R0  
SKY85402  
Thick film chip resistor  
Thick film chip resistor  
Thick film chip resistor  
Thick film chip resistor  
802.11ac +22dBm PA  
R2, R3, R5, R6  
0402  
Panasonic  
R8  
0402  
27 Ω  
Panasonic  
R11  
U1  
0402  
13 Ω  
Panasonic  
QFN 400 X 400  
SKY85402-11  
Skyworks Solutions Inc.  
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com  
June 26, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202120K  
8
DATA SHEET • SKY85402-11: HIGH POWER (+22 dBm) 802.11ac WLAN PA  
Package Dimensions  
Package and Handling Information  
The PCB layout footprint for the SKY85402-11 is provided in  
Figure 12. Typical part markings are shown in Figure 13.  
Package dimensions are shown in Figure 14, and tape and reel  
dimensions are provided in Figure 15.  
Since the device package is sensitive to moisture absorption, it  
is baked and vacuum packed before shipping. Instructions on  
the shipping container label regarding exposure to moisture  
after the container seal is broken must be followed. Otherwise,  
problems related to moisture absorption may occur when the  
part is subjected to high temperature during solder assembly.  
The SKY85402-11 is rated to Moisture Sensitivity Level 3  
(MSL3) at 260 C. It can be used for lead or lead-free soldering.  
For additional information, refer to the Skyworks Application  
Note, Solder Reflow Information, document number 200164.  
Care must be taken when attaching this product, whether it is  
done manually or in a production solder reflow environment.  
Production quantities of this product are shipped in a standard  
tape and reel format.  
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com  
202120K • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 26, 2017  
9
DATA SHEET • SKY85402-11: HIGH-POWER (+22 dBm) 802.11ac WLAN PA  
4.40  
2.60  
0.25 Typ  
4.40  
0.25 Typ  
0.70 Typ  
0.20  
0.70 Typ  
4.40  
4.40  
2.60  
0.508 Typ  
0.95 Typ  
Package  
Outline  
Package  
Outline  
0.500 Typ  
0.20  
4X 0.20  
25X Ø0.25  
0.95 Typ  
0.500 Typ  
0.508 Typ  
Stencil Aperture  
Top View (Note 5)  
Board Metal and Via Pattern  
Top View (Note 4)  
63% Solder Coverage  
On Center Pads  
4.50  
0.35 Typ  
0.80 Typ  
4.50  
2.40  
Package  
Outline  
Package  
Outline  
0.500 Typ  
2.40  
Solder Mask Opening  
Top View (Note 6)  
Notes:  
1. All dimensions are in millimeters.  
2. Dimensions and tolerances in accordance with ASME Y14.5–1994.  
3. Unless specified, dimensions are symmetrical about center lines.  
4. Via hole recommendations: 30 to 35 µm Cu via wall plating. Via holes should be  
tented with solder mask on the backside and filled with solder.  
5. Stencil recommendations: 0.125 mm stencil thickness, laser cut apertures,  
trapezoidal walls, and rounded corners offer better paste release.  
6. Solder mask recommendations: Contact board fabricator for recommended solder  
mask offset and tolerance.  
202120-012  
Figure 12. PCB Layout Footprint for the SKY85402-11  
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com  
June 26, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202120K  
10  
DATA SHEET • SKY85402-11: HIGH POWER (+22 dBm) 802.11ac WLAN PA  
Pin 1  
Indicator  
Skyworks  
SKY85402  
XXXXXXXXX  
YYWW CC  
Part Number  
Lot Code  
Date Code/  
Country Code  
202120-013  
Figure 13. Typical Part Markings  
(Top View)  
0.850 0.050  
A
2X  
2.500 0.050  
4.000 0.050  
See Note 3  
M
0.10 C A B  
0.15 C  
B
0.30 x 45°  
0.203 Ref.  
20 19 18  
17 16  
16  
17 18 19  
20  
1
2
15  
14  
13  
1
2
15  
14  
13  
12  
11  
R0.05  
Typ.  
4.000 0.050  
3
4
5
3
2.500 0.050  
0.500  
12  
11  
4
5
M
0.10 C A B  
Seating  
Plane  
2X  
10  
9
8
7
6
0.15 C  
6
7
8
9
10  
0–0.05  
20X 0.250 0.050  
M
0.10 C A B  
20X 0.500 0.050  
C
M
0.05  
C
Top View  
Side View  
Bottom View  
Notes:  
1. All measurements are in millimeters.  
2. Dimensions and tolerances according to ASME Y14.5M-1994.  
Unless otherwise specified the following values apply:  
Decimal Tolerance:  
X.X (1 place) 0.1 mm  
X.XX (2 places) 0.05 mm  
Angular Tolerance:  
1°  
X.XXX (3 places) 0.025 mm  
3. Terminal #1 identification mark located within marked area.  
4. Unless specified, dimensions are symmetrical about center lines.  
202120-014  
Figure 14. SKY85402-11 Package Dimensions  
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com  
202120K • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 26, 2017  
11  
DATA SHEET • SKY85402-11: HIGH-POWER (+22 dBm) 802.11ac WLAN PA  
2.0 0.1 (Note 1)  
4.0 0.1 (Note 2)  
0.30 0.05  
1.75 0.1  
B
Ø1.55 0.05  
A
Ø1.5 Min  
4.35 0.1  
Ref 3°  
B
4.35 0.1  
8.00 0.1  
1.10 0.1  
Ref R0.25  
Ref R0.25  
Section B  
Notes:  
Detail A  
1. Measured from center line of sprocket hole to center line of pocket.  
2. Cumulative tolerance of 10 sprocket holes is 0.20 mm.  
3. All dimensions are in millimeters, unless otherwise specified.  
202120-015  
Figure 15. SKY85402-11 Tape and Reel Dimensions  
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com  
June 26, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202120K  
12  
DATA SHEET • SKY85402-11: HIGH POWER (+22 dBm) 802.11ac WLAN PA  
Ordering Information  
Model Name  
Manufacturing Part Number  
SKY85402-11  
Evaluation Board Part Number  
SKY85402-11EK1  
SKY85402-11: High-Power WLAN Power Amplifier  
Copyright © 2012-2017 Skyworks Solutions, Inc. All Rights Reserved.  
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by  
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the  
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to  
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.  
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or  
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions  
of Sale.  
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A  
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY  
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS  
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,  
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGE.  
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,  
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any  
damages resulting from such improper use or sale.  
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of  
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for  
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.  
Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for  
identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by  
reference.  
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com  
202120K • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • June 26, 2017  
13  
配单直通车
SKY85402-11产品参数
型号:SKY85402-11
是否Rohs认证:符合
生命周期:Active
IHS 制造商:SKYWORKS SOLUTIONS INC
包装说明:QFN-20
Reach Compliance Code:compliant
HTS代码:8542.39.00.01
风险等级:1.71
Is Samacsys:N
JESD-30 代码:S-XQCC-N20
长度:4 mm
湿度敏感等级:3
功能数量:1
端子数量:20
最高工作温度:85 °C
最低工作温度:-40 °C
封装主体材料:UNSPECIFIED
封装代码:HVQCCN
封装形状:SQUARE
封装形式:CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
峰值回流温度(摄氏度):260
座面最大高度:0.9 mm
标称供电电压:5 V
表面贴装:YES
技术:BICMOS
电信集成电路类型:RF AND BASEBAND CIRCUIT
温度等级:INDUSTRIAL
端子形式:NO LEAD
端子节距:0.5 mm
端子位置:QUAD
处于峰值回流温度下的最长时间:NOT SPECIFIED
宽度:4 mm
Base Number Matches:1
  •  
  • 供货商
  • 型号 *
  • 数量*
  • 厂商
  • 封装
  • 批号
  • 交易说明
  • 询价
批量询价选中的记录已选中0条,每次最多15条。
 复制成功!