ML2724
PHYSICAL DIMENSIONS (inches/millimeters)
0.354 BSC
(9.00 BSC)
0.276 BSC
(7.00 BSC)
0º - 8º
25
0.003 - 0.008
(0.09 - 0.20)
1
PIN 1 ID
0.276 BSC
(7.00 BSC)
0.354 BSC
(9.00 BSC)
17
0.018 - 0.030
(0.45 - 0.75)
9
0.032 BSC
(0.8 BSC)
0.012 - 0.018
(0.29 - 0.45)
0.048 MAX
(1.20 MAX)
0.037 - 0.041
(0.95 - 1.05)
SEATING PLANE
WARRANTY
Micro Linear makes no representations or warranties with respect to the accuracy, utility, or completeness of the
contents of this publication and reserves the right to make changes to specifications and product descriptions at any
time without notice. No license, express or implied, by estoppel or otherwise, to any patents or other intellectual
property rights is granted by this document. The circuits contained in this document are offered as possible applications
only. Particular uses or applications may invalidate some of the specifications and/or product descriptions contained
herein. The customer is urged to perform its own engineering review before deciding on a particular application. Micro
Linear assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of
Micro Linear products including liability or warranties relating to merchantability, fitness for a particular purpose, or
infringement of any intellectual property right. Micro Linear products are not designed for use in medical, life saving, or
life sustaining applications.
If this document is “Advance”, its contents describe a Micro Linear product that is currently under development. All
detailed specifications including pinouts and electrical specifications may be changed without notice. If this document is
“Preliminary”, its contents are based on early silicon measurements. Typical data is representative of the product but is
subject to change without notice. Pin out and mechanical dimensions are final. Preliminary documents supersede all
Advance documents and all previous Preliminary versions. If this document is “Final”, its contents are based on a
characterized product, and it is believed to be accurate at the time of publication. Final Data Sheets supersede all
previously published versions. This document is Final.
© 2003 Micro Linear Corporation. All rights reserved. All other trademarks are the property of their respective owners.
Products described herein may be covered by one or more of the following U.S. patents: 4,897,611;
5,027,116; 5,281,862; 5,283,483; 5,418,502; 5,508,570; 5,510,727; 5,523,940; 5,546,017; 5,559,470;
5,592,128; 5,594,376; 5,652,479; 5,661,427; 5,663,874; 5,672,959; 5,689,167; 5,714,897; 5,717,798;
5,747,977; 5,754,012; 5,757,174; 5,767,653; 5,777,514; 5,793,168; 5,798,635; 5,804,950; 5,808,455;
5,818,207; 5,818,669; 5,825,165; 5,825,223; 5,838,723; 5.844,378; 5,844,941. Japan: 2,598,946;
2,704,176; 2,821,714. Other patents are pending.
4,964,026;
5,565,761;
5,742,151;
5,811,999;
2,619,299;
DS2724-F-01
FINAL DATASHEET
APRIL 2003
25
MICRO-LINEAR [ MICRO LINEAR CORPORATION ]
