K4D261638E
2M x 16Bit x 4 Banks Double Data Rate Synchronous DRAM
with Bi-directional Data Strobe and DLL
FEATURES
• 2.5V + 5% power supply for device operation
• 2.5V + 5% power supply for I/O interface
• SSTL_2 compatible inputs/outputs
• 4 banks operation
• MRS cycle with address key programs
-. Read latency 3, 4 (clock)
-. Burst length (2, 4 and 8)
-. Burst type (sequential & interleave)
• All inputs except data & DM are sampled at the positive
going edge of the system clock
• Differential clock input
• No Wrtie-Interrupted by Read Function
• 2 DQS’s ( 1DQS / Byte )
128M DDR SDRAM
• Data I/O transactions on both edges of Data strobe
• DLL aligns DQ and DQS transitions with Clock transition
• Edge aligned data & data strobe output
• Center aligned data & data strobe input
• DM for write masking only
• Auto & Self refresh
• 32ms refresh period (4K cycle)
• 66pin TSOP-II
• Maximum clock frequency up to 350MHz
• Maximum data rate up to 700Mbps/pin
ORDERING INFORMATION
Part NO.
K4D261638E-TC2A
K4D261638E-TC33
K4D261638E-TC36
K4D261638E-TC40
K4D261638E-TC50
Max Freq.
350MHz
300MHz
275MHz
250MHz
200MHz
Max Data Rate
700Mbps/pin
600Mbps/pin
550Mbps/pin
500Mbps/pin
400Mbps/pin
SSTL_2
66pin TSOP-II
Interface
Package
For the K4D261638E-TC2A, VDD & VDDQ = 2.8V+0.1V
GENERAL DESCRIPTION
FOR 2M x 16Bit x 4 Bank DDR SDRAM
The K4D261638E is 134,217,728 bits of hyper synchronous data rate Dynamic RAM organized as 4 x 2,097,152 words by
16 bits, fabricated with SAMSUNG
’
s high performance CMOS technology. Synchronous features with Data Strobe allow
extremely high performance up to 1.4GB/s/chip. I/O transactions are possible on both edges of the clock cycle. Range of
operating frequencies, programmable burst length and programmable latencies allow the device to be useful for a variety
of high performance memory system applications.
- 3 -
Rev. 1.2 (Jul. 2003)
SAMSUNG [ SAMSUNG SEMICONDUCTOR ]
