Si1010/1/2/3/4/5
SFR Definition 5.3. ADC0AC: ADC0 Accumulator Configuration
Bit
7
6
5
4
3
2
1
0
AD012BE
AD0AE
AD0SJST
AD0RPT
Name
Type
Reset
R/W
0
W
0
R/W
0
R/W
0
0
0
0
0
SFR Page = 0x0; SFR Address = 0xBA
Bit
Name
Function
7
AD012BE
ADC0 12-Bit Mode Enable.
Enables 12-bit Mode.
0: 12-bit Mode Disabled.
1: 12-bit Mode Enabled.
6
AD0AE
ADC0 Accumulate Enable.
Enables multiple conversions to be accumulated when burst mode is disabled.
0: ADC0H:ADC0L contain the result of the latest conversion when Burst Mode is
disabled.
1: ADC0H:ADC0L contain the accumulated conversion results when Burst Mode
is disabled. Software must write 0x0000 to ADC0H:ADC0L to clear the accumu-
lated result.
This bit is write-only. Always reads 0b.
5:3
AD0SJST[2:0] ADC0 Accumulator Shift and Justify.
Specifies the format of data read from ADC0H:ADC0L.
000: Right justified. No shifting applied.
001: Right justified. Shifted right by 1 bit.
010: Right justified. Shifted right by 2 bits.
011: Right justified. Shifted right by 3 bits.
100: Left justified. No shifting applied.
All remaining bit combinations are reserved.
2:0
AD0RPT[2:0] ADC0 Repeat Count.
Selects the number of conversions to perform and accumulate in Burst Mode.
This bit field must be set to 000 if Burst Mode is disabled.
000: Perform and Accumulate 1 conversion.
001: Perform and Accumulate 4 conversions.
010: Perform and Accumulate 8 conversions.
011: Perform and Accumulate 16 conversions.
100: Perform and Accumulate 32 conversions.
101: Perform and Accumulate 64 conversions.
All remaining bit combinations are reserved.
Rev. 1.0
87
SILICON [ SILICON ]
