Si8610/20/21/22
Table 5. Regulatory Information*
CSA
The Si861x/2x is certified under CSA Component Acceptance Notice 5A. For more details, see File 232873.
61010-1: Up to 600 V
reinforced insulation working voltage; up to 600 V
basic insulation working voltage.
RMS
RMS
RMS
60950-1: Up to 600 V
age.
reinforced insulation working voltage; up to 1000 V
basic insulation working volt-
RMS
60601-1: Up to 125 V
reinforced insulation working voltage; up to 380 V
basic insulation working voltage.
RMS
RMS
VDE
The Si861x/2x is certified according to IEC 60747-5-2. For more details, see File 5006301-4880-0001.
60747-5-2: Up to 1200 V for basic insulation working voltage.
peak
60950-1: Up to 600 V
age.
reinforced insulation working voltage; up to 1000 V
basic insulation working volt-
RMS
RMS
UL
The Si861x/2x is certified under UL1577 component recognition program. For more details, see File E257455.
Rated up to 5000 V isolation voltage for basic protection.
RMS
*Note: Regulatory Certifications apply to 3.75 kVRMS rated devices which are production tested to 4.5 kVRMS for 1 sec.
Regulatory Certifications apply to 5.0 kVRMS rated devices which are production tested to 6.0 kVRMS for 1 sec.
For more information, see "6. Ordering Guide" on page 27.
Table 6. Insulation and Safety-Related Specifications
Value
Parameter
Symbol
Test Condition
Unit
WB
NB
SOIC-16
SOIC-8
1
Nominal Air Gap (Clearance)
L(IO1)
L(IO2)
8.0
8.0
4.9
4.01
0.011
mm
mm
mm
1
Nominal External Tracking (Creepage)
Minimum Internal Gap (Internal Clearance)
0.014
Tracking Resistance
(Proof Tracking Index)
PTI
ED
IEC60112
f = 1 MHz
600
600
V
RMS
0.019
0.040
mm
Erosion Depth
2
12
12
Resistance (Input-Output)
R
10
10
IO
2
Capacitance (Input-Output)
C
2.0
4.0
2.0
4.0
pF
pF
IO
3
Input Capacitance
C
I
Notes:
1. The values in this table correspond to the nominal creepage and clearance values as detailed in “7. Package Outline:
16-Pin Wide Body SOIC”, “9. Package Outline: 8-Pin Narrow Body SOIC”. VDE certifies the clearance and creepage
limits as 8.5 mm minimum for the WB SOIC-16 package and 4.7 mm minimum for the NB SOIC-8 package. UL does
not impose a clearance and creepage minimum for component level certifications. CSA certifies the clearance and
creepage limits as 3.9 mm minimum for the NB SOIC-8 and 7.6 mm minimum for the WB SOIC-16 package.
2. To determine resistance and capacitance, the Si86xx is converted into a 2-terminal device. Pins 1–8 (1–4, NB SOIC-8)
are shorted together to form the first terminal and pins 9–16 (5–8, NB SOIC-8) are shorted together to form the second
terminal. The parameters are then measured between these two terminals.
3. Measured from input pin to ground.
14
Rev. 1.3
SILICON [ SILICON ]
