欢迎访问ic37.com |
会员登录 免费注册
发布采购

S29GL032A11FFIR40 参数 Datasheet PDF下载

S29GL032A11FFIR40图片预览
型号: S29GL032A11FFIR40
PDF下载: 下载PDF文件 查看货源
内容描述: 64兆位32MEGABIT 3.0 BOLT单页面模式闪存 [64 MEGABIT 32MEGABIT 3.0 BOLT ONLY PAGE MODE FLASH MEMORY]
分类和应用: 闪存存储内存集成电路
文件页数/大小: 88 页 / 1198 K
品牌: SPANSION [ SPANSION ]
 浏览型号S29GL032A11FFIR40的Datasheet PDF文件第57页浏览型号S29GL032A11FFIR40的Datasheet PDF文件第58页浏览型号S29GL032A11FFIR40的Datasheet PDF文件第59页浏览型号S29GL032A11FFIR40的Datasheet PDF文件第60页浏览型号S29GL032A11FFIR40的Datasheet PDF文件第62页浏览型号S29GL032A11FFIR40的Datasheet PDF文件第63页浏览型号S29GL032A11FFIR40的Datasheet PDF文件第64页浏览型号S29GL032A11FFIR40的Datasheet PDF文件第65页  
A d v a n c e
I n f o r m a t i o n
DQ6: Toggle Bit I
Toggle Bit I on DQ6 indicates whether an Embedded Program or Erase algorithm
is in progress or complete, or whether the device has entered the Erase Suspend
mode. Toggle Bit I may be read at any address, and is valid after the rising edge
of the final WE# pulse in the command sequence (prior to the program or erase
operation), and during the sector erase time-out.
During an Embedded Program or Erase algorithm operation, successive read cy-
cles to any address cause DQ6 to toggle. The system may use either OE# or CE#
to control the read cycles. When the operation is complete, DQ6 stops toggling.
After an erase command sequence is written, if all sectors selected for erasing
are protected, DQ6 toggles for approximately 100 µs, then returns to reading
array data. If not all selected sectors are protected, the Embedded Erase algo-
rithm erases the unprotected sectors, and ignores the selected sectors that are
protected.
The system can use DQ6 and DQ2 together to determine whether a sector is ac-
tively erasing or is erase-suspended. When the device is actively erasing (that is,
the Embedded Erase algorithm is in progress), DQ6 toggles. When the device en-
ters the Erase Suspend mode, DQ6 stops toggling. However, the system must
also use DQ2 to determine which sectors are erasing or erase-suspended. Alter-
natively, the system can use DQ7 (see the subsection on DQ7: Data# Polling).
If a program address falls within a protected sector, DQ6 toggles for approxi-
mately 1 µs after the program command sequence is written, then returns to
reading array data.
DQ6 also toggles during the erase-suspend-program mode, and stops toggling
once the Embedded Program algorithm is complete.
shows the outputs for Toggle Bit I on DQ6.
shows the toggle bit
algorithm.
in the “AC Characteristics” section shows the toggle bit tim-
ing diagrams.
shows the differences between DQ2 and DQ6 in graphical
form. See also the subsection on DQ2: Toggle Bit II.
January 28, 2005 S29GLxxxA_00_A2
S29GLxxxA MirrorBit™ Flash Family
59