欢迎访问ic37.com |
会员登录 免费注册
发布采购

71M6532F-IGT/F 参数 Datasheet PDF下载

71M6532F-IGT/F图片预览
型号: 71M6532F-IGT/F
PDF下载: 下载PDF文件 查看货源
内容描述: 电能计量IC [Energy Meter IC]
分类和应用: 电源电路电源管理电路
文件页数/大小: 115 页 / 2363 K
品牌: TERIDIAN [ TERIDIAN SEMICONDUCTOR CORPORATION ]
 浏览型号71M6532F-IGT/F的Datasheet PDF文件第48页浏览型号71M6532F-IGT/F的Datasheet PDF文件第49页浏览型号71M6532F-IGT/F的Datasheet PDF文件第50页浏览型号71M6532F-IGT/F的Datasheet PDF文件第51页浏览型号71M6532F-IGT/F的Datasheet PDF文件第53页浏览型号71M6532F-IGT/F的Datasheet PDF文件第54页浏览型号71M6532F-IGT/F的Datasheet PDF文件第55页浏览型号71M6532F-IGT/F的Datasheet PDF文件第56页  
Data Sheet 71M6531D/F-71M6532D/F
FDS 6531/6532 005
WDT, it is guaranteed that whatever state the part might find itself in, upon watchdog overflow, the part
will be reset to a known state.
Asserting ICE_E will also deactivate the WDT. This is the only method that will work in BROWNOUT
mode. In normal operation, the WDT is reset by periodically writing a one to the
WDT_RST
bit. The
watchdog timer is also reset when the internal signal WAKE=0 (see Section
If enabled with the
IEN_WD_NROVF
register in I/O RAM, an interrupt occurs roughly 1 ms before the WDT
resets the chip. This can be used to determine the cause of a WDT reset since it allows the code to log
its state (e.g. the current PC value, loop counters, flags, etc.) before a WDT reset occurs.
1.5.17 Test Ports (TMUXOUT pin)
One of the digital or analog signals listed in
can be selected to be output on the TMUXOUT pin.
The function of the multiplexer is controlled with the I/O RAM register
TMUX
(0x20AA[4:0]), as shown in
Table 46:
TMUX[4:0]
Selections
TMUX[4:0]
0
1
2
3
4
5
6
7
8 - 0x0F
0x10
0x11
0x12
0x13
0x14
0x15
0x16 – 0x17
0x18
0x19
0x1A
0x1B
0x1C
0X1D
0X1E
0X1F
Mode
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Analog
Digital
Digital
Digital
Digital
Digital
Digital
Digital
Digital
Digital
Digital
Digital
Digital
Function
DGND
Reserved
DGND
Reserved
PLL_2P5
Output of the 2.5 V low-power regulator
Internal VBIAS voltage (nominally 1.6V)
Not used
Reserved
RTC 1-second output
RTC 4-second output
Not used
V1_OK comparator output
Real-time output (RTM) from the CE
WDTR_EN (Comparator 1 Output AND V1LT3)
Not used
RXD (from Optical interface, w/ optional inversion)
MUX_SYNC
Not used
CKMPU (MPU clock)
Pulse output
RTCLK (output of the oscillator circuit, nominally
32,786Hz)
CE_BUSY (busy interrupt generated by CE, 396µs)
XFER_BUSY (transfer busy interrupt generated by the
CE, nominally every 999.7ms)
The TMUXOUT pin may be used for diagnosis purposes or in production test. The RTC 1-second output
may be used to calibrate the crystal oscillator. The RTC 4-second output provides even higher precision.
52
© 2005-2009 TERIDIAN Semiconductor Corporation
v1.2