W25X80AVSSIG 参数 Datasheet PDF下载

W25X10A, W25X20A, W25X40A, W25X80A

10.1.6 Status Register Protect (SRP)

The Status Register Protect (SRP) bit is a non-volatile read/write bit in status register (S7) that can be

used in conjunction with the Write Protect (/WP) pin to disable writes to status register. When the SRP

bit is set to a 0 state (factory default) the /WP pin has no control over status register. When the SRP

pin is set to a 1, the Write Status Register instruction is locked out while the /WP pin is low. When the

/WP pin is high the Write Status Register instruction is allowed.

Figure 3. Status Register Bit Locations

- 12 -