Z8 Encore! XP
®
4K Series
Product Specification
20
Reset, STOP Mode Recovery and Low
Voltage Detection
Overview
The Reset Controller within the Z8 Encore! XP
®
4K Series controls Reset and STOP
Mode Recovery operation and provides indication of low supply voltage conditions. In
typical operation, the following events cause a Reset:
•
•
•
•
•
•
•
•
•
Reset Types
Power-on reset (POR)
Voltage brown-out (VBO)
Watch-Dog Timer time-out (when configured by the WDT_RES Flash Option Bit to
initiate a reset)
External RESET pin assertion (when the alternate RESET function is enabled by the
GPIO register)
On-chip debugger initiated Reset (OCDCTL[0] set to 1)
When the device is in STOP mode, a STOP Mode Recovery is initiated by either of the
following:
Watch-Dog Timer time-out
GPIO Port input pin transition on an enabled STOP Mode Recovery source
The low voltage detection circuitry on the device (available on the 8-pin product versions
only) performs the following functions:
Generates the VBO reset when the supply voltage drops below a minimum safe level
Generates an interrupt when the supply voltage drops below a user-defined level (8-pin de-
vice only)
The Z8 Encore! XP
®
4K Series provides several different types of Reset operation. STOP
Mode Recovery is considered a form of Reset.
lists the types of Reset and their
operating characteristics. The System Reset is longer if the external crystal oscillator is
enabled by the Flash option bits, allowing additional time for oscillator start-up.
PS022815-0206
Reset, STOP Mode Recovery and Low Voltage Detection
ZILOG [ ZILOG, INC. ]
