8520-4500PL应用文章市场行情现货热卖使用介绍供应商报价-中国IC网-芯三七

产品型号8520-4500PL的Datasheet PDF文件预览

3M^™Polarized Boardmount Socket

.100" × .100" Centerbump Polarization with Straight Solder Tails

8500 Series

•ꢀ Centerbump polarization

•ꢀ Mates with low proﬁle shrouded headers

•ꢀ Part number on each piece

•ꢀ Optional keying plug

•ꢀ UL 94V-0 rated polyester body

•ꢀ Board retention feature

•ꢀ See regulatory information appendix (RIA) for

chemical compliance information

Date Modiﬁed: April 11, 2008

TS-0413-C

Sheet 1 of 2

Physical

Insulation:

Material: Glass Filled Polyester (PBT)

Flammability: UL 94V-0

Color: Gray

Contact:

Material: CopperAlloy

Underplating:

2 μm [ 79 μ" ] Nickel

WipingArea: 0.3 μm [ 12 μ" ] Gold

Solder Tails: Gold ﬂash

3M Logo, Part Identiﬁcation Number and Orientation Triangle

Marking:

Electrical

Current Rating:

Insulation Resistance:

Withstanding Voltage:

> 1 × 10⁹Ω at 500V_DC

1,000V_RMSat Sea Level

Environmental

-55°C to 105°C

Temperature Rating:

260°C 10 seconds (Wave Solder)

390°C 3 seconds (Soldering Iron)

Process Rating:

UL File No.: E68080

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

Electronic Solutions Division

Interconnect Solutions

http://www.3M.com/interconnects/

3M^™Polarized Boardmount Socket

.100" × .100" Centerbump Polarization with Straight Solder Tails

8500 Series

Dimensions

Pin Qty

Position 2

3.6

17.2 [0.68]

24.8 [0.98]

29.9 [1.18]

37.5 [1.48]

42.6 [1.68]

47.7 [1.18]

55.3 [2.18]

68.0 [2.68]

80.7 [3.18]

85.8 [ 3.38 ]

[ .14 ]

6.1

[ .24 ]

85XX

2.54

[ .100 ]

2.54 Typ

[ .100 ]

Position 1

Centerbump (Standard)

1.0

[ .04 ]

Military:

Dual Polarization

Slots

See Note 1

3.4

[ .13 ]

2.8

[ .11 ]

10.8

[ .425 ]

Triangle

Indicates

Position 1

0.81

[ .032 ]

See Note 2

2.54 Ref

[ .100 ]

0.62

[ .024 ]

0.65

[ .026 ]

0.32

[ .013 ]

2.54 Ref

[ .100 ]

2.54 .076

[ .100 ]

Breakaway

Tab

2.54 .076

[ .100 ]

1.0 .076 Typ

[ .039 ]

3435

Recommended Mounting Hole Pattern

(Shown for Top Side of PC Board)

6.1

[ .24 ]

1.30

[ .051 ]

0.81

[ .032 ]

0.66

[Inch]

[ .026 ]

Tolerance Unless Noted

3435-0

Keying Plug

0.0

0.00

±.13

0.00

±.3

(Optional: Order Separately)

Notes:

[ ] Dimensions for Reference

1. This polarizing groove is non-existent on the 10 position version.

Only

2. The contact soldertail is designed to retain the connector on the

PC board during ﬂow soldering operations.

3. Recommended to be mated to the 2.54 [.100] × 2.54 [.100] low

proﬁle header and the Plug Connector 4600 Series without ejector latches.

Ordering Information

Sockets

85XX - 4500PL

(RIA E1 & C1 apply)

Contact Quantity

See Table

TS-0413-C

Sheet 2 of 2

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

Electronic Solutions Division

Interconnect Solutions

http://www.3M.com/interconnects/

Regulatory Information Appendix

3M Electronic Solutions Division/Interconnect

EUROPE

Appendix E1: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product is RoHS Compliant 2005/95/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E2: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is

compliant by exemption under EU Commission Decision 2005/747/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E3: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as

amended by Commission Decision 2005/618/EC.

This product contains lead in the solder tail area in excess of the maximum concentration value allowed.

Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information

provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E4: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is

compliant by exemption under EU Commission Decision 2005/717/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

RIA-2217B-D

Appendix E5: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as

amended by EU Commission Decision 2005/618/EC.

This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under

Item 6 of the Annex to the Directive.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of

the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless

the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information

represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

CHINA

Appendix C1: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for

Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means

that the product or part does not contain any of the following substances in excess of the following maximum concentration

values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls

or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this

information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and

Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix C2: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for

Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that

the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration

values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls

or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this

information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an

extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with

3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the

product Warranty stated below.

RIA-2217B-D

Appendix C3: China RoHS