Operating Conditions
This table lists recommended operational voltage conditions.
Table 4. Recommended Operating Conditions
1
Rating
Core supply voltage
PLL supply voltage
I/O supply voltage
Input voltage
Junction temperature (maximum)
Ambient temperature
1
Symbol
VDD
VCCSYN
VDDH
VIN
T
j
T
A
Value
1.425 – 575
1.425 – 575
3.135 – 3.465
GND (–0.3) – 3.465
105
2
0–70
2
Unit
V
V
V
V
°C
°C
Caution:
These are the recommended and tested operating conditions. Proper operation outside of these conditions
is not guaranteed.
2
Note that for extended temperature parts the range is (-40) – 105 .
T
Tj
A
This SoC contains circuitry protecting against damage due to high static voltage or electrical fields;
however, it is advised that normal precautions be taken to avoid application of any voltages higher than
maximum-rated voltages to this high-impedance circuit. Reliability of operation is enhanced if unused
inputs are tied to an appropriate logic voltage level (either GND or V
CC
).
This figure shows the undershoot and overshoot voltage of the 60x bus memory interface of the SoC. Note
that in PCI mode the I/O interface is different.
4V
GV
DD
+ 5%
GV
DD
V
IH
V
IL
GND
GND – 0.3 V
GND – 1.0 V
Not to exceed 10%
of t
SDRAM_CLK
Figure 2. Overshoot/Undershoot Voltage
MPC8272 PowerQUICC II Family Hardware Specifications, Rev. 3
8
Freescale Semiconductor