PX3511A, PX3511B
Small Outline Plastic Packages (SOIC)
N
INDEX
AREA
E
-B-
1
2
3
SEATING PLANE
-A-
D
-C-
A
h x 45°
H
0.25(0.010) M
B M
M8.15
(JEDEC MS-012-AA ISSUE C)
8 LEAD NARROW BODY SMALL OUTLINE PLASTIC PACKAGE
INCHES
SYMBOL
A
A1
L
MILLIMETERS
MIN
1.35
0.10
0.33
0.19
4.80
3.80
5.80
0.25
0.40
8
8°
0°
8°
MAX
1.75
0.25
0.51
0.25
5.00
4.00
6.20
0.50
1.27
NOTES
-
-
9
-
3
4
-
-
5
6
7
-
Rev. 1 6/05
MIN
0.0532
0.0040
0.013
0.0075
0.1890
0.1497
0.2284
0.0099
0.016
8
0°
MAX
0.0688
0.0098
0.020
0.0098
0.1968
0.1574
0.2440
0.0196
0.050
B
C
D
E
e
H
C
α
A1
0.10(0.004)
0.050 BSC
1.27 BSC
e
B
0.25(0.010) M
C A M
B S
h
L
N
NOTES:
1. Symbols are defined in the “MO Series Symbol List” in Section 2.2 of
Publication Number 95.
2. Dimensioning and tolerancing per ANSI Y14.5M-1982.
3. Dimension “D” does not include mold flash, protrusions or gate burrs.
Mold flash, protrusion and gate burrs shall not exceed 0.15mm (0.006
inch) per side.
4. Dimension “E” does not include interlead flash or protrusions. Inter-
lead flash and protrusions shall not exceed 0.25mm (0.010 inch) per
side.
5. The chamfer on the body is optional. If it is not present, a visual index
feature must be located within the crosshatched area.
6. “L” is the length of terminal for soldering to a substrate.
7. “N” is the number of terminal positions.
8. Terminal numbers are shown for reference only.
9. The lead width “B”, as measured 0.36mm (0.014 inch) or greater
above the seating plane, shall not exceed a maximum value of
0.61mm (0.024 inch).
10. Controlling dimension: MILLIMETER. Converted inch dimensions
are not necessarily exact.
α
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
10
FN6462.0
February 26, 2007
INTERSIL [ INTERSIL CORPORATION ]
