X9313
Ordering Information
(Continued)
PART NUMBER
X9313WMIZ-3* (Note)
X9313WS-3*
X9313WSZ-3* (Note)
X9313ZM-3*
X9313ZMZ-3* (Note)
X9313ZMI-3*
X9313ZMIZ-3* (Note)
X9313ZP-3
X9313ZPZ-3 (Note)
X9313ZS-3*
X9313ZSZ-3* (Note)
X9313ZSI-3*
X9313ZSIZ-3* (Note)
PART
MARKING
13WEZ
X9313W D
X9313W ZD
13ZD
DDK
13ZE
13ZEZ
X9313ZP D
X9313ZP ZD
X9313Z D
X9313Z ZD
X9313Z E
X9313Z ZE
3 to 5.5
1
V
CC
RANGE
(V)
R
TOTAL
(kΩ)
TEMPERATURE
RANGE
(°C)
-40 to +85
0 to +70
0 to +70
0 to +70
0 to +70
-40 to +85
-40 to +85
0 to +70
0 to +70
0 to +70
0 to +70
-40 to +85
-40 to +85
PACKAGE
8 Ld MSOP (Pb-free)
8 Ld SOIC
8 Ld SOIC (Pb-free)
8 Ld MSOP
8 Ld MSOP (Pb-free)
8 Ld MSOP
8 Ld MSOP (Pb-free)
8 Ld PDIP
8 Ld PDIP (Pb-free)***
8 Ld SOIC
8 Ld SOIC (Pb-free)
8 Ld SOIC
8 Ld SOIC (Pb-free)
PKG.
DWG. #
M8.118
MDP0027
M8.15
M8.118
M8.118
M8.118
M8.118
MDP0031
MDP0031
MDP0027
M8.15
MDP0027
M8.15
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
*Add "T1" suffix for tape and reel.
**Add "T2" suffix for tape and reel.
***Pb-free PDIPs can be used for through hole wave solder processing only. They are not intended for use in Reflow solder processing applications.
Pin Descriptions
RH/VH and RL/VL
The high (RH/VH) and low (RL/VL) terminals of the X9313
are equivalent to the fixed terminals of a mechanical
potentiometer. The terminology of RL/VL and RH/VH
references the relative position of the terminal in relation to
wiper movement direction selected by the U/D input and not
the voltage potential on the terminal.
Chip Select (CS)
The device is selected when the CS input is LOW. The current
counter value is stored in nonvolatile memory when CS is
returned HIGH while the INC input is also HIGH. After the
store operation is complete the X9313 will be placed in the low
power standby mode until the device is selected once again.
Pinouts
X9313
8 LD PDIP, 8 LD SOIC
TOP VIEW
INC
U/D
RH/VH
VSS
1
2
X9313
3
4
6
5
8
7
VCC
CS
RL/VL
RW/VW
RW/VW
RW/VW is the wiper terminal and is equivalent to the
movable terminal of a mechanical potentiometer. The
position of the wiper within the array is determined by the
control inputs. The wiper terminal series resistance is
typically 40Ω at V
CC
= 5V.
Up/Down (U/D)
The U/D input controls the direction of the wiper movement
and whether the counter is incremented or decremented.
X9313
8 LD MSOP
TOP VIEW
RH/VH
VSS
RW/VW
RL/VL
1
2
X9313
3
4
6
5
8
7
U/D
INC
VCC
CS
Increment (INC)
The INC input is negative-edge triggered. Toggling INC will
move the wiper and either increment or decrement the
counter in the direction indicated by the logic level on the
U/D input.
3
FN8177.5
April 18, 2007
INTERSIL [ INTERSIL CORPORATION ]
