E3X-DA-N
Standard
models
E3X
-DA11-N
E3X
-DA41-N
Monitor-
output
models
E3X
-DA21-N
E3X
-DA51-N
Infrared
models
E3X
-DAH11-N
E3X
-DAH41-N
Water-
resistant
models
E3X
-DA11V
E3X
-DA41V
Twin-output
models
E3X
-DA11TW
E3X
-DA41TW
Type
Output
type
Item
NPN
output
PNP
output
Mark-detecting models
E3X
-DAB11-N
E3X
-DAB41-N
E3X
-DAG11-N
E3X
-DAG41-N
Ambient temperature
Operating:Groups of 1 to 3 Amplifiers:
−25
to 55°C
Groups of 4 to 11 Amplifiers:
−25
to 50°C
Groups of 12 to 16 Amplifiers:
−25
to 45°C
Storage:−30 to 70°C (with no icing or condensation)
Operating and storage: 35% to 85% (with no condensation)
20 MΩ min. (at 500 VDC)
1,000 VAC at 50/60 Hz for 1 min
10 to 55 Hz with a 1.5-mm double amplitude for 2 h each in X, Y and Z directions
500m/s
2
, for 3 times each in X, Y and Z directions
IEC IP66 (with
Protective
Cover
attached)
Approx. 110 g
IEC IP50 (with
Protective
Cover
attached)
Approx. 100 g
Polyethersulfo
ne
Ambient humidity
Insulation resistance
Dielectric strength
Vibration resistance
(destruction)
Shock resistance
(destruction)
Degree of protection
IEC IP50 (with Protective Cover attached)
Connection method
Weight (packed state)
Materi-
al
Case
Cover
Pre-wired (standard cable length: 2 m)
Approx. 100 g
Polybutylene terephthalate (PBT)
Polycarbonate
Instruction sheet
Accessories
Amplifiers with Connectors
(Specifications different to those for Pre-wired Amplifiers)
Type
Output
type
Item
NPN
output
PNP
output
Standard
models
E3X-DA6
E3X-DA8
Monitor-out-
put models
E3X-DA7
E3X-DA9
Mark-detecting models
Infrared
models
E3X-DAH6
E3X-DAH8
Water-
resistant
models*
E3X
-DA14V
E3X
-DA44V
M8 connector
Approx. 65 g
Twin-output
models
E3X
-DA6TW
E3X
-DA8TW
Standard
connector
Approx. 55 g
E3X-DAB6
E3X-DAB8
E3X-DAG6
E3X-DAG8
Connection method
Weight (packed state)
Standard connector
Approx. 55 g
* The dielectric strength for water-resistant models is 500 VAC at 50/60 Hz for 1 min.
Connectors
Item
Rated current
Rated voltage
Contact resistance
Mobile Console
Model
2.5 A
50 V
20 mΩ max. (20 mVDC max., 100 mA max.)
The figure is for connection to the Amplifier and the adjacent
Connector. It does not include the conductor resistance of the cable.
50 times
The figure for the number of insertions is for connection to the
Amplifier and the adjacent Connector.
Polybutylene terephthalate (PBT)
Phosphor bronze/gold-plated nickel
Approx. 55 g
Approx. 25 g
E3X-CN11/21/22
E3X-CN12
Item
Model
E3X-MC11
Charged with AC
adapter
Connected via adapter
Approx. 580 g
(Console only: 120 g)
Power supply
voltage
Connection
method
Weight
(packed state)
No. of insertions
(durability)
Material
Housing
Contacts
Refer to
Instruction Manual
provided
with the Mobile Console for details.
Weight (packed state)
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
7